Mcoplus WMU96 UHF Wireless Microphone System User Manual

: June 5, 2024
: Mcoplus

Table of Contents

WMU96 UHF Wireless Microphone System
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WMU96 UHF Wireless Microphone System

UHF Wireless Microphone System WMU96

Transmitter

Receiver

User Manual

Foreword
Thanks for purchasing MCOPLUS UHF-WMU96 wireless microphone
UHF-WMU96 is an wireless microphone with dual-transmitter triggered by one receiver,it utilizes UHF wireless FM technology and high-resolution lattice screen,16-level adjustable volume,and integrated into LCF(Low Cut Filter Mode), Auto-scanning, Auto IR Channel-match,stereo / mono switchable audio mode, RF signal strength adjustment, MIC/LINE IN input dual selection, power monitoring at receiver end, sound pickup dynamic display, backlight adjustment and other functions, at the same time with strong shielding anti-noise performance, it’s a high-quality microphone to broadcasting level.

Main Features
USE 2X AA Battery Manual or Auto IR Sync Transmitter Power Monitor Audio Dynamic Display Bar LCF Low Cut Filtering Mode 16 Levels Volume Adjustment Adjustable RF Signal Strength Lattice LCD Display, High Resolution Mono/Stereo Switchable Output Modes ABS Manufacturing, Excellent Shielding Auto-scanning for Quick Channel Selection Used for Multiple Devices Working Together Low- consumption, Super-long Standby Time Dual Transmitters Triggered by One Receiver, 1/2 Double Group Options Working Distance is Up to 120m (120m in Open Area, 80m in Barrier Area)

120m

120m Working Dual-Mic Trigger 1or 2 Group Audio Dynamic

Distance

Fast Switch

Display Bar

Low Cut Filter

Auto-scanning

Adjustable RF Signal Strength

Auto IR Sync

Transmitter

16 Levels

Mono/Stereo Real-time Monitor

Power Monitor Volume Adjustment Audio Switch

AA Battery

Low Power Consumption

LCD

EN/

Lattice LCD

Optional Language

Notice
! Please keep this product in dry environment; ! The antenna will affect the working distance. Please protect the antenna and
avoidany man-made damage; ! Do not expose the device in rain or humid environment, otherwise there will be a
danger of short circuit; ! When using auto IR sync, please stay within 60cm, otherwise the signal may
be too weak and the sync will not be successful; ! In the case of stereo/mono mode switch, please preset the mode before using to
avoid the transient interference caused by switching during usage; ! The working distance will be affected by the surrounding environment. Please try
to keep the environment open without interference during usage, and close the WIFI of the device itself; ! When using this product in a short distance, it is recommended to set RF strength at `LOW’ to reduce the power consumption; ! For smart phone shooting, customers must separately purchase a TRS-TRRS audio converting cable,and pay attention to set the mobile phone mode to ‘Flight Mode’ to avoid incoming call interference;(It does not support the original recording system of some android systems, thethird-party APP is recommended to be used in this case);
Package Contents
Main Parts:

Transmitter

Transmitter(Tx)

Receiver(Rx)

Multiple Selections

WMU96(A)=2TX + RX

Transmitter(Tx) Transmitter(Tx)

Receiver(Rx)

WMU96(B)=TX + RX

Transmitter(Tx)

Receiver(Rx)

Accessories:

3.5mm Mic Input Cable 3.5mm-3.5mm Output Cable 3.5mm-XLR Output Cable

Cold Shoe

Belt Clip 3

User Manual

Components

1 Group 1 Antenna

2 Group 2 Antenna

3 Group PowerWorking Status Indicator Light

4 Group 1-group1 and 2-Group 2 exchanging switch

5 Power Switch 6 SET Function Button 7 LCD Screen 8 3.5mm Audio Output Socket

3 12
5
10 6

9 3.5mm Monitoring Socket

10 Function Selection Button +

11 Function Selection Button –

12 IR Sensor

13 1/ 4Cold boots fixed hole

14 Belt Clip

15 AA Battery Compartments

2
7 4
11 15

Battery Installation

Transmitter and receiver is powered by 2 AA batteries, please follow the steps to install the battery:

1.To open the battery cover door, you have to press the door.(please

follow the arrow direction

)

2.Take the battery pack door out.

3.Install the batteries to the compartment according to its positive and negative poles, and then put it back in the microphone body.
-+ +-
–
Attention
Please make sure to turn the microphone in “off” condition while you intend to install the battery, in case the microphone will produce big noise when it is working.
Battery Instruction When the power is on, LCD screen will display the electric quantity of the batteries. Before you install the batteries, please check out whether the battery is still in expiration date.
5

Function Button Instruction

Lavalier

Power / Muting Button

Transmitter

/ Receiver

Long Press Power On / Off

Short Press

Muting ModeThis function is only for transmitter, when the mute function is turned on and the
screen is lighted up

SET Function Menu
+Button

-Button
–

Long Press Enter/Exit the function menu

Short Press

1.Confirm the selected function 2.Exit the function adjustment menu

Short Press Function Adjustment (+)

Short Press Function Adjustment (-)

Low cut function:
Appropriately remove the low frequency part of the sound, reduce the ambient noise of the low frequency part, to make sound more clean and clear.
Signal strength high / low switching effect:
With high signal strength, the wireless working distance is up to 80-120M, high power consumption, battery life is short; With low signal strength, the wireless working distance is up to 30-60M, low power consumption, the battery can be used for a long time.

WMU96 LED Indicator Light Instruction

TX RX

POWER POWER

Power full Power half Power low Power full Power half Power low

green light red light
red light flash green light
green light flash red light flash

Installation and Usage Lavalier Transmitter
1.Insert the 3.5mm audio input line into MIC socket
2.Long press the power button to turn on the transmitter
8

3. After the channel matching with the receiver,it could check whether
transmitter is work normally according volume bar display Mic gain
0dB 4dB 7dB 12dB 16dB 19dB 24dB
1
CH-96
520.000MHz
Audio dynamic display bar
4. Connect the belt clip to the connection hole
9

Receiver
1.Connect the receiver to the video device through the cold shoe 2. Insert the 3.5mm-3.5mm audio OUTPUT line into the OUTPUT port, and
insert the headphone into the 3.5mm monitoring socket for real-time monitoring, then long press the power button to turn on the receiver
Please refer to screen operation instruction for channel matching.
IR IR
(Products include)
After the channel matching Transmitter and receiver, it can be used

OUT PUT

Receiver screen description
Group 1 Signal Strength Display Bar Power Indication Group 2 Signal Strength Display Bar

Group 1

CH01

Group 2

Group 1 transmitting power

Group B Receiving Audio Status Indication

Group 1 Receiving Audio Status Indication Group 2 Transmitting power

When Group 1/2 is on, the background color of channel 1 is black;

When Group 1/2 is off, channel 1display is transparent .

CH01

Receiver Operation
Manually adjust the receiver channel 1/2
Long press SET button into setting page

CH01

(Main Page)

SETTINGS Channel 1 Channel 2 Volume 1

– 1.Adjust frequency of channel 1/2 by + button – 1 Short press SET choose channel 1, then press + to
choose frequency.

SETTINGS Channel 1 Channel 2 Volume 1

Channel 1
CH 01 520.250MHz

……

Channel 1
CH 96 554.450MHz

– 2 Short press SET choose channel 2, then press + to choose frequency.

SETTINGS Channel 1 Channel 2 Volume 1

Channel 2
CH 01 556.100MHz

……

Channel 2
CH 96 590.300MHz

2.1/2 Volume
– 1 Short press SET choose Volume1, then press + to adjust volume.

SETTINGS Volume 1 Volume 2

Volume1 VOL 01

……

Volume1 VOL 16

– 2 Short press SET choose Volume2, then press + to adjust volume.

SETTINGS Volume 1 Volume 2

Volume2 VOL 01

……

Volume2 VOL 16

3. 1/2 Auto scan 1 Short press SET choose Auto scan1, then Auto scan automatically.

SETTINGS
Auto scan 1 Auto scan 2

Auto scan 1 Scanning:00

……

Auto scan 1 Scanning:96

2 Short press SET choose Auto scan2, then Auto scan automatically.

SETTINGS Auto scan 1 Auto scan 2

Auto scan 2 Scanning:00

……

Auto scan 2 Scanning:96

Automatically scan and ensure the best frequency according to the environment for users’ reference

4.IR Sync 1 / 2 Selection
1 Short press SET choose “IR Sync 1”,Receiver automatically paired with transmitter 1 frequency

SETTINGS IR Sync 1 IR Sync 2

IR Sync 1 IR sync start

Pair the Channel Through Infrared Sync

During matching, don’t shield the infrared receiving screen of the transmitter against the receiver.
13

2 Short press SET choose “IR Sync 2”,Receiver automatically paired with transmitter 2 frequency

SETTINGS IR Sync 1 IR Sync 2

IR Sync 2 IR sync start

Pair the Channel Through Infrared Sync

During matching, don’t shield the infrared receiving screen of the transmitter against the receiver.
5.Channel 1 or Channel 2 Radio Exchanging Switch 1 Slide Switch Buttonturn to channel 1/Channel 2/Channel ½
1
½
2
14

6.Power Lock
– 1 Short press SET choose “Power lock”, then press + to choose Disable/Enable.

SETTINGS Power lock

POWER LOCK
Disable Enable

CH01

(Home page)

When open power lock, power button is lock,it will not power off when long press power
button. (avoid misoperation power off If want return normal, operate as this: long press SET button Select the power button lock Choose close power lock.

7.Backlight “lighting time/turn off” Adjustment
– 1 Short press SET choose “LCD light”, then press + to choose mode.

SETTINGS LCD light

LCD LIGHT
Delay 20s
Delay 40s ON OFF

8.Audio output mode “Stereo/mono”adjustment

– 1 Short press SET choose “Output”, then press + to choose mode.

SETTINGS Output

OUTPUT
Mono Stereo

CH01

Mono mode Stereo mode

9.System Language
– 1 Short press SET choose “Language “, then press + to choose mode.

SETTINGS L a n g u a g e (

LANGUAGE
English

10.Reset to Defaults
– 1 Short press SET choose “Reset”, then press + to choose mode.

SETTINGS Reset

RESET
Yes NO

11.Version
1 Short press SET button to Version display page

SETTINGS Version

VERSION V0.1.0.1

Components and Instruction

1
1 Antenna

2 Power Working Status Indicator Light

Channel 1 or Channel 2 Radio Exchanging Switch

4 Power / Muting Button

5 SET Function Button

6 LCD Screen

2
6
4 8
5

7 MIC External Input

8 Function Selection Button + 9 Function Selection Button –

10 IR Sensor

11 1/4 Mounting Hole 12 Belt Clip

13 LINE IN External Input

14 AA Battery Compartments

12 14

13 7

Emitter screen description

1 1Group Muting(Unlocking) 2 2Group Muting(Locking)

Normal recording Muting

1
Channel
Audio dynamic display bar

CH-96
520.250MHz

Power Indication Channel Frequency

Operation Instruction
Manually Adjust the Channel of Transmitter
Long press SET button to setting displsy page

1
CH-96
520.250MHz
(Main Page)

SETTINGS Channel Power lock

1.Group 1 / 2 Selection
– 1 Short press SET enter “Channel ” , then press + to choose frequency.
Group 1 Carrier frequency, 520.25MHz~554.45MHz

SETTINGS Channel Power lock

CHANNEL
CH 01 520.25MHz

CHANNEL
…… CH 96 554.45MHz

– 2 Short press SET choose “Channel “, then press + to choose frequency. Group 2 Carrier frequency, 556.100MHz~590.300MHz

SETTINGS Channel Power lock

CHANNEL
CH 01 556.100MHz

CHANNEL
…… CH 96 590.300MHz

2.Group 1/2 Adjustment 1 Slide Switch Buttonturn to channel 1/Channel 2

1 2

3. Power Lock
– 1 Short press SET choose “Power lock”, then press + to choose “Disable/Enable”

SETTINGS Channel Power lock

POWER KEY LOCK
Disable Enable

1
CH-96
520.250MHz
(Home page)

When open power lock, power button is lock,it will not power off when long press power

button. (avoid misoperation power off

If want return normal, operate as this: long press SET button lock Choose close power lock.

Select the power button

4.Mic gain
– 1 Short press SET choose “Mic gain”, then press + to choose Microphone gain effect.

SETTINGS Mic gain LCD Light Low cut

MIC GAIN
0dB 4dB 7dB 12dB 16dB 19dB 24dB

5.Backlight “Lighting time/turn off”Adjustment

– 1 Short press SET choose “LCD Light”, then press + to choose mode

SETTINGS Mic gain LCD Light Low cut

LCD LIGHT
Delay 20s Delay 40s ON OFF

6.Low cut On/OFF”Settings
1 Short press SET button to “Low Cut Filter” display page

SETTINGS Low cut

LOW CUT
Low cut off Low cut on

Low cut function
low-cut function will filter out the low-frequency part of the audio source, such as the chirping and crowd noise, and the main audio source will be more crisp.Appropriately remove the low frequency part of the sound, reduce the ambient noise of the low frequency part, to make sound more clean and clear.

7. Input Mode 1 Choice Line in /Mic in

LINE IN

MIC

Mic in mode is for Microphone input; Line in mode is for external audio input, such as smart phone music player. Selecting the corresponding input mode will bring you a better audio effect.
23

8.RF Power
– 1 Short press SET choose “RF power”, then press + to choose mode.

SETTINGS RF power

RF POWER Low Middle High

9.System Language
– 1 Short press SET enter “Language “, then press + to choose mode.

SETTINGS

LANGUAGE

L a n g u a g e (

English

10.Reset to Defaults
– 1 Short press SET enter “Reset”, then press + to choose Yes/NO.

SETTINGS Reset

RESET
Yes NO

11.Version
1 Short press SET button to Version display page

SETTINGS Version

VERSION V0.1.0.1

Product technical specifications

Transmitter TX

Channels

Group 1 Carrier frequency 520.250MHz~554.450MHz

Group 2 Carrier frequency 556.100MHz~591.300MHz

Transmit power

17dBm

Receiver RX

Channels

Group 1 Carrier frequency 520.250MHz~554.450MHz

Group 2 Carrier frequency 556.100MHz~591.300MHz

Transmitter Spec.

Channels Groups Wireless Frequency Signal to Noise Ratio Stray Radiation Transmitter Sound delay Antenna Reference deviation Audio Distortion Reference Audio Input Level Battery Type Weight Dimensions Operating Temperature Storage Temperature

96 1 or 2 520.25 MHZ- 591.30MHz 70dB -60dB 40mW <10 ms 1/4 Wavelength Wire Antenna ±5kHz-60dBV1kHzinput) 0 . 5%
-40dB(Microphone Input,0dB descrease
2xAA Battery about 79.5g 220×64×24mm 0- 50 – 2 0- 5 5

Receiver Spec.
Channels Groups Wireless Frequency Antenna Audio Output Level Headphone Output Level Receiver Sensitivity Signal to Noise Ratio Sound delay Frequency Respond Reference deviation Audio Distortion Battery Type Weight Dimensions Operating Temperature Storage Temperature

96 1 and 2
520.25 MHZ- 591.30MHz 1/4 Wavelength Wire Antenna -10dB 87mW(32 -95dB
70dB <10 ms 40Hz-18kHz(+/-3dB) ±5kHz-60dBV.input1kHz) 0.5% 2xAA Battery ablut 79.5g 220×64×24mm 0- 50 – 2 0- 5 5

U H F – W M U9 6 ;
U HF-WMU 96 , U H F , ,9 6 ,1 /2 , 1 6 , , , , / ,RF , MIC/LINE IN , , , L C D , , 2A A ,
, ,

1 6 / / LCD ABS , , 1/ 2 2AA 120 m 80 m)

LCD

/EN

120m

LCD

1/2

1 20m

! . ! . ! , . ! , 6 0 c m , , . ! / , ,
. ! ,
W IFI. ! R F ” L O W ” . ! , T R S – T R R S ,
“” . (, AP P)

(T X)

( R X )

WMU96(A)=2TX + RX
( T X )

( T X )

( RX )

WMU96(B)=TX + RX

(T X)

( R X )

3.5mm Mic

3.5mm-3.5mm 3.5mm-XLR

1 1 2 2 3 4 1- ½-2 5 / 6 SET 7 8 3.5mm 9 3.5mm 10 + 11 12 IR 13 1/4 14 15 AA

1
3 12
5 10
6

89 14

AA , ,

1 ., ,

2 .

3. ,

-+ +-

–

SET

–
–

1 . 2 .

( + )

( – )

/
8 0 – 1 2 0 m , 30-60m,

WMU96 LED
96

T X / R X /

POWER/

1 .3 .5m m M I C

MUTE

POWER

2 .

3.MI C, 0dB 4dB 7dB 12dB 16dB 19dB 24dB
1
CH-96
554.000MHz

4 .
35

1. 2 .3. 5m m-3.5mm OUTPUT 3. 5m m .

IR
( )
,

OUT PUT

CH01

1 1

2
2

1/2 1/21/2

CH01
s

1 / 2
SET

CH01

)

1 2 1

– 1. + 1/2
1 SET “1 “,

1 2 1

1
01 520.250MHz

……

1
96 554.450MHz

– 2 SET “2”, +

1 2 1

2
01 556.100MHz

……

2
96 590.300MHz

2 . 1 / 2
– 1 SET “1”, +

1 2

1 01

……

1 16

– 2 SET “2”, +

1 2

2 01

……

2 16

3. 1/2
1 SET “1 ”

1 2

1 :00

……

1 :96

– 2 + “2”

1 2

2 : 0 0

……

2 : 9 6

4 .
1 SET “1 ”

1 2

2 SET “2 ”

1 2

5 .1- ½-2 1 1-½-21,12,2
1
½
2
40

6 .
– 1 SET “”, +

CH01

( )

: , ( ) , . SET

7. ” /”
– 1 SET “”, +

20 40

– 1 SET “”, +

CH01

9 .
1 SET L a n g u a g e ( ,

( L a n g u a g e

English

1 SET ” “,

1 1 .
1 SET ” V 0 . 1 . 0 . 1″

V0.1.0.1

3 1 /2

2
4 /
6

5 SET

8 5

7 3 . 5mm

8 + 9 10 I R

11 1 / 4 12

13 L i n e i n

14 A A

13 7

12 11
14

1 1 2 2

1
CH-96
554.450MHz

SET

1
CH-96
520.250MHz
( )

1 .
– 1 SET “”, + , G r o u p 1 ( 5 2 0 . 2 5 M H z ~ 5 5 4 . 4 5 0 M H z )

01 520.25MHz

…… 96 554.450MHz

2 SET ” “,

Group2( 556.100MHz~590.300MHz)

01 556.100MHz

…… 96 590.300MHz

4 .
– 1 SET ” “, +

0dB 4dB 7dB 12dB 16dB 19dB 24dB

– 1 SET ” “, +

20 40

2 . 1-2
1 1-21,2
1 2

– 1 SET “”, + “/”

1
CH-96
520.250MHz
( )

: , ( ) , , Mute.
SET

– 1 SET ” “, + “/”

1 ” L I N E I N / M I C ”

LINE IN

MIC

1 SET ” “,

-+ “//”

– 1 SET Language(, +

( L a n g u a g e

English

– 1 SET , +
1 SET “”

V0.1.0.1

T X

Group 1 Group 2

96 520.25MHz~554.450MHz 556.100MHz~590.300MHz 17dBm

R X Group 1 Group 2

96 520.250MHz~554.450MHz 556.100MHz~590.300MHz

96 1 2 520.25 MHZ- 591.30MHz 70dB -60dB 40mW <10 ms 1/ 4
±5 k H z-6 0 d BV1kHz) 0 . 5% -40dB( ,0d B 2A A 79.5g 220×64×24mm 0- 50 – 2 0- 5 5

96 1 2 520.25 MHZ- 591.30MHz 1 / 4 -10dB 87mW(32) -95dB 70dB <10 ms 40Hz- 18kHz(+/-3dB) ±5kHz-60dBV1kHz ) 0.5% 2A A 79.5g 220×64×24mm 0- 50 -2 0- 55
52

WWW.MCOPLUSHK.COM HONGKONG MCOPLUS TECHNOLOGY CO., LIMITED
RM 1902 EASEY COMM BLDG 253-261 HENNESSY ROAD WANCHAI HK TEL:+86-755-89325423 info@mcoplus213.com
Made in China

References

Mcoplus - Mcoplus camera accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

WMU96 UHF Wireless Microphone System

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Related Manuals