E20 Built Atomi Level

Product Information

Specifications

• Dimensions: Approx. 42.5 x 23.2 x 44.9in (1080 x 590 x
  1140mm)

• Folded Dimensions: Approx. 42.5 x 23.2 x 21.1in (1080 x 590 x
  535mm)

• Weight: 15.8KG

• Maximum Speed: Approx. 15.5 mph (25 km/h)

• Maximum Range: Approx. 18.6 miles (30 km)

• Battery Capacity: Approx. 15%

Product Usage Instructions

Screw Tightening Storage

The scooter’s screws may become loose due to vibrations caused
by shipping, motor usage, and riding on uneven roads. It is
important to periodically check and tighten the screws to ensure
the stability and safety of the scooter.

Cleaning

To clean the scooter, use a soft and wet cloth to wipe the
frame. Avoid using alcohol, gasoline, acetone, or other
corrosive/volatile solvents as they may damage the appearance and
internal structure of the scooter. Do not wash the scooter with a
power washer or hose.

WARNING: Before cleaning, ensure that the
scooter is powered off, the charging cable is unplugged, and the
cap on the charge port is tightly sealed. Failure to do so may
result in damage to the electronic components, which is not covered
by the warranty.

Charging

It is recommended to charge the scooter fully after every ride
to prolong the battery life. If the scooter is not used, it should
be fully charged at least once a month. Avoid draining the battery
completely and do not leave the scooter undercharged for over 48
hours, as this may damage the battery and void the warranty. Only
use chargers sold and approved by ATOMI and do not charge or use
the battery if it is damaged or shows signs of water exposure.

WARNING: Do not store the scooter in extreme
temperatures for an extended period of time, as it may damage the
battery life and accelerate the aging of plastic and silicon
components.

Battery

Completely draining the battery can cause permanent damage, so
it is important to avoid doing so. Over-charging or under-charging
the battery will not be covered by the Limited Warranty. Do not
attempt to disassemble the battery, touch the battery contacts, or
dismantle/puncture the casing. Keep the battery contacts away from
metal objects to prevent any electrical issues.

Brake Adjustment

It is advised to tighten the brake after every 200 kilometers
ridden or whenever you feel that the brake is not performing well.
To adjust the brake:

1. Locate the adjustment screw at the connection of the brake
   cable and handle. Turn the screw clockwise to tighten it.

2. If the screw has reached the maximum position of adjustment and
   the brake is still not comfortably tight, proceed to the next
   step.

3. Locate the screw on the brake lever on the left-hand side of
   the wheel. Tighten the screw by turning it clockwise.

If you are unsure about how to adjust the brake, you can refer
to a video tutorial on our support center at www.atomiscooters.com/support.

Tires

The tires supplied with the scooter should be mounted on the
wheels by professional repairers. Removing the wheels and
assembling them incorrectly can lead to instability and
malfunctions.

FCC Statement

This device complies with part 15 of the FCC Rules. It is
designed not to cause harmful interference and must accept any
interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment. The device has been
evaluated to meet general RF exposure requirements and can be used
in portable exposure without restriction.

FAQ

Q: How often should I tighten the screws on the scooter?

A: The screws on the scooter should be tightened periodically,
especially after receiving the scooter, and then as needed due to
vibrations from motor usage and riding on uneven roads.

Q: Can I wash the scooter with water?

A: You should not wash the scooter with a power washer or hose.
Instead, use a soft and wet cloth to wipe the frame. Avoid using
alcohol, gasoline, acetone, or other corrosive/volatile solvents as
they may damage the scooter’s appearance and internal
structure.

Q: How often should I charge the scooter’s battery?

A: It is recommended to charge the scooter fully after every
ride to prolong the battery life. If the scooter is not used, it
should be fully charged at least once a month. Avoid draining the
battery completely and do not leave the scooter undercharged for
over 48 hours.

Q: Can I use any charger to charge the scooter?

A: No, you should only use chargers that are sold and approved
by ATOMI. Using other chargers may not be compatible and could
potentially damage the scooter or battery.

Q: How should I adjust the brakes?

A: To adjust the brakes, locate the adjustment screw at the
connection of the brake cable and handle. Turn the screw clockwise
to tighten it. If needed, there is an additional screw on the brake
lever on the left-hand side of the wheel that can be tightened as
well. If you are unsure, refer to the video tutorial on our support
center.

Q: Can I remove and mount the tires on the scooter myself?

A: It is recommended to have the tires mounted on the wheels by
professional repairers. Incorrect assembly can lead to instability
and malfunctions.

1. 2.
3.

Screw Tightening Storage

might be loosen by vibration caused by shipping, motor and riding on uneven road.

Cleaning

Use a soft and wet cloth to wipe the frame.
Do not wash the scooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your scooter.
Do not wash your scooter with a power washer or hose.

WARNING!

Before cleaning, make sure the scooter is POWERED OFF, the charging cable is unplugged and the cap on the charge port is tightly sealed. Otherwise you may damage the electronic component which is not covered by the warranty.

11

Charging

Charge the scooter fully after every ride. This will prolong the battery life. If not used, charge scooter fully once a month. Do not drain the battery completely. Do not leave your scooter undercharged for over 48 hours. This may damage the battery and is not covered by warranty.
Do not use chargers that are not sold and approved by ATOMI. Do not charge or use battery if it is damaged or see trace of water.

WARNING!

for extended period of time. It may damage the battery life and accelerate the aging of plastic and silicon components.

Battery

The ideal battery level is 70% for long term storage. Do not charge or store the battery outside the temperatures limits. Refer to your local laws and regulations to recycle or dispose the battery. When used at temperature 22°C/70°F, the battery performance is at its best; whereas using it at temperatures below 0°C/32°F can decrease the range and performance.
12

temperature rises.
Completely draining the battery may cause permanent damage to the battery. Damage caused by over-charging or under-charging will not be covered by the Limited Warranty.

WARNING!

Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing. Keep the battery contacts away from metal

Brake Adjustment

You are advised to tighten the brake after 200 kilometers ride, or whenever you feel the brake is not performing well.
Locate the adjustment screw at the connection of the brake cable and handle. Turn the screw clockwise to tighten it. If the screw has reach maximum position of adjustment, and the brake is not comfortably tight, proceed to the next step.
Locate the screw on the brake lever on the left hand side of the wheel. Tighten the screw by turning it clockwise.

If you are not sure how to adjust the brake, please refer to the video via our support center at www.atomiscooters.com/support

13

Tires

Tires supplied with the scooter are to be mounted on the wheels by professional repairers. Removing the wheels is complicated and incorrect assembly can lead to instability and malfunctions.

FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.

14

Item

ATOMI ALPHA
Approx. 42.5 x 23.2 x 44.9in (1080 x 590 x 1140mm) Approx. 42.5 x 23.2 x 21.1in (1080 x 590 x 535mm) 15.8KG
Approx. 15.5 mph (25 km/h) Approx. 18.6 miles (30 km) Approx. 15%

15

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>