westfalia 963040 1050 Wat Powerbilt Electric Paint Mixer Instruction Manual

963040 1050 Wat Powerbilt Electric Paint Mixer

Product Information

The product is a mixing paddle with an Art. number 96 30 40. It comes with a speed controller and a connecting shaft. The device has a nominal speed of 0-900 min-1 and operates on a rated voltage of 230 V~ 50 Hz. The rated power of the device is 1050 W, and it weighs 4008 g. The size of the mixing paddle is 120 mm x 600 mm.
The device produces a sound pressure level of LpA=87 dB(A) and a sound power level of LwA=98 dB(A). The spindle thread is designed to minimize hand-arm vibration, and the maximum torque is suitable for most mixing applications.

Product Usage Instructions

• Read the manual carefully before using the device.
• Use the device only according to the instructions provided in the manual.
• Dispose of the packaging material carefully or store it out of reach of children to avoid suffocation.
• The device is not a toy and should be kept out of reach of children or persons in need of supervision.
• Supervise children if they are using the device to avoid accidents.
• Wear gloves while using the device to reduce vibration exposure.
• Limit working time to reduce vibration exposure.
• Use accessories in good condition to reduce vibration exposure.

Safety Notes
Follow the general safety notes included in the manual and the following safety notes to avoid malfunctions, damage, or physical injury:

• Identify safety measures to protect the operator based on an estimation of exposure in the actual conditions of use.
• The declared vibration total value and noise emission values are for comparing one tool with another and may differ during actual use.
• Minimize the impact of vibration and noise by taking exemplary measures such as wearing gloves while using the tool, limiting working time, and using accessories in good condition.
• Never leave the device unsupervised when in use.

1. On/Off switch
2.  Safety switch
3. Motor housing
4. Speed controller
5. Drive shaft
6. Connecting shaft
7. Mixer element
8. Cable

TECHNICAL DATA

Hand Arm

Vibration

| ah = 5,5 m/s² K = 1,5 m/s²
Spindle thread| M14
Max torque| 30 Nm
Cable length| 3 m

Dear Customers,
Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent  damage. Please take the time to read this manual carefully and keep it for future reference.

Unbox device

Assembly

Switch on

Speed selection

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning!
The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined.

It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time)

Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

SAFETY NOTES
Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.

• Please read this manual carefully and use the unit only according to this manual.

• Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!

• The unit is not a toy and does not belong in the hands of children. Never leave the unit unsupervised when in use. Keep it out of reach of children or persons in need of supervision. Children should be supervised to ensure that they do not play with the unit.

• Persons with limited physical, sensorial, or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.

• Do not aim the machine at humans or animals.

• Prior to beginning operation, check the machine and the mixing paddle for presence of damages, unbalanced attachment and vibrations. Perform a test run before starting to work.

• Switch off the electric mixer and allow the mixing paddle to stop before you leave it aside.

• Keep your hands away from rotating parts of the machine.

• Be attentive! Pay attention what you do. Approach your work with circumspection.

• Do not use the unit when your reactivity is affected by alcohol consumption, medication, drugs, illness or tiredness. One moment of abstraction operating the unit can cause grave injuries.

• Keep your work area clean. Disorder can cause accidents.

• Avoid physical contact to grounded surfaces such as pipes, heating elements, electric cookers, refrigerators, etc.

• Do not force the unit. You work better and safer within the stated power range. Use the right tool for the job.

• When not using a stand to operate the electric mixer, make sure you have a firm foothold when operating the mixer and always hold the unit with both hands. Keep the electric mixer away from your body.

• Make sure that the tool is inserted firmly and that no adjusting tools or keys stick in the unit before switching on the mixer.

• Please wear convenient work clothes. Loose clothing, gloves or jewellery such as bangles or rings may be caught by the moving parts of the unit.
  Wear non-slip footwear. Tie up long hair.

• To avoid injuries please wear safety goggles.

• Never temper solvents with a flashpoint below 21 °C. Please note
  processing and safety instructions of material resp. machine manufacturers.

• Store the unit out of the reach of children in a dry, high located or lockable place.

• Do not use the unit when it does not work properly or it was damaged when falling down. Do not open the unit and do not try to repair it yourself. Please feel free to contact a professional or our customer service.

• Periodically check all nuts, bolts and other fixings and tighten where necessary.

EC DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product
Electric Mixer 1050 W
Article No. 96 30 40
is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)
2014/30/EU
2014/30/EU
Electromagnetic Compatibility (EMC)
EN IEC 55014-1:2021, EN IEC 55014-2:2021,
EN 61000-3-2:2014, EN 61000-3-3:2013
2006/42/EG
2006/42/EC
Maschinen
Machinery
EN 62841-1:2015+AC, EN 62841-2-10:2017
The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany.
Hagen, den 10. Januar 2023
Hagen, 10th of January, 2023

CUSTOMER SERVICES

Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

DISPOSAL
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>