BEGA 24473 Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA-24473-Wall-Luminaire-FIG-1
DIMENSION
Product Information
Product Usage Instructions
Instructions for use
Overvoltage protection
Installation
Cleaning Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA-24473-Wall-Luminaire-FIG-1

BEGA-24473-Wall-Luminaire-PRODUCT

DIMENSION

BEGA-24473-Wall-Luminaire-FIG-1

Product Information

The Wandleuchte Wall luminaire Applique (product code: 24 473) is a wall luminaire with two-sided light distribution opening. It provides fully glare- free light for lighting wall surfaces and can be used for both interior and exterior lighting design. The luminaire is made of aluminium alloy and stainless steel, with a safety glass, white finish. It has a weight of 1.0 kg and is classified as safety class I. The luminaire has an IP 65 protection rating, making it dust-tight and protected against water jets. It also has an impact strength of IK06, providing protection against mechanical impacts.

Product Usage Instructions

Safety: The installation and operation of this luminaire must comply with national safety regulations. Only a qualified electrician should perform the installation and commissioning. The manufacturer is not liable for damage caused by improper use or installation.
Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website at www.bega.com.
Luminaire Specifications:
Lamp Module Connected Wattage: 3.8 W
Luminaire Connected Wattage: 4.9 W
Module Designation: LED-0424/930
Colour Temperature: 3000 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 630 lm
Luminaire Luminous Flux: 311 lm
Luminaire Luminous Efficiency: 63.5 lm/W
Additional Luminaire Option (24 473 K4) :
Module Designation: LED-0424/940
Colour Temperature : 4000 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 665 lm
Luminaire Luminous Flux: 328 lm
Luminaire Luminous Efficiency: 66.9 lm/W

For more detailed information and technical specifications, please refer to the manufacturer’s website at www.bega.com.

Instructions for use

Application

Wall luminaire with two-sided light distribution opening.
Fully glare free light for lighting wall surfaces. For interior or exterior lighting design.
Product description
Luminaire made of aluminium alloy and stainless steel
BEGA Unidure® coating technology
Safety glass, white
Silicone gasket 2 elongated fixing holes
Width 4.5 mm · 177 mm spacing 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK06
Protection against mechanical impacts < 1 joule
r – Safety mark
c – Conformity mark
Weight: 1.0 kg
This product contains light sources of energy efficiency class(es) D

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at: www.bega.com

Lamp

Module connected wattage 3.8 W
Luminaire connected wattage 4.9 W
Rated temperature ta= 25 °C
Ambient temperature ta max= 45 °C

24 473K3

Module designation LED-0424/930
Colour temperature 3000 K
Colour rendering index CRI >90
Module luminous flux 630 lm
Luminaire luminous flux 311 lm
Luminaire luminous efficiency 63,5 lm/W

24 473K4

Module designation LED-0424/940
Colour temperature 4000 K
Colour rendering index CRI >90
Module luminous flux 665 lm
Luminaire luminous flux 328 lm
Luminaire luminous efficiency 66,9 lm/W

Installation

Undo hexagon socket head screws (wrench size 3 mm) through the opening in the luminaire housing up to the stop and lift luminaire top.
Disconnect plug-connection of the LED connecting cable.
Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Make earth conductor connection between luminaire top and luminaire base.
Connect the LED connection cable by means of a plug connector.
Make sure that gasket is positioned correctly. Install the luminaire top, press-on and tighten screws evenly.
Please ensure that no cables are pinched by the luminaire top.

Cleaning Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.

Spares