milleteknik 4U01000P00019P01D 19 Rack Module Holder Instruction Manual
- June 12, 2024
- Milleteknik
Table of Contents
milleteknik 4U01000P00019P01D 19 Rack Module Holder
ABOUT 19 RACK MODULE HOLDERS AND 19 RACK DIN MODULE HOLDER
19 rack module holder and 19 rack DIN module is a four-unit high enclosure for mounting in 19 “racks or on a wall. 19 rack module holder has a lockable door in plexiglass and comes with a tamper connector as standard. The unit is also available with a mounted DIN rail to attach options such as circuit breakers, power supplies or other components that have a DIN rail bracket. With a DIN rail mounted, the unit is called: 19 rack DIN module holder.
-
19 rack module holder
-
Sheet metal housing for 19 “rack or mounting directly on the wall, the product comes with a tamper switch.
19 rack DIN module holder -
Sheet metal housing with DIN rail for 19 “rack or mounting directly on the wall, the product comes with a tamper switch.
- Cable entries may vary depending on the version of sheet metal housing, the number of card slots is the same in the different versions.
TECHNICAL DATA
TECHNICAL DATA: 19 RACK MODULE HOLDER AND 19 RACK DIN MODULE HOLDER
Manufactured in Milleteknik’s factory in Partille, Sweden. This translation is not verified and should be cross referenced with the swedish original before use.
| Short name: | 19 rack module holder | 19 rack DIN module holder |
|---|---|---|
| Version: | 4U010000P00019P01 | 4U01000P00019P01D |
| E-number: | 5001063 | 5001064 |
| Product de- scription | 19″ inch module for mounting Milleteknik’s fuse card |
and/or alarm device monitoring card. It is also possible to use the module
together with Linjator’s connection modules and/or Sentrion DSS modules.|
Sheet metal housing with DIN rail for 19 “rack or mounting directly on the
wall, the product comes with a tamper switch.
Number of module slots| 8 pcs. L-modules or 4 pcs. 10 output modules or 4 pcs.
Fire module 4 outputs. It is fine to mix cards among module slots, but the
number of module slots cannot be increased.| 20 pcs. circuit breakers
Tamper switch| Yes
The product fits in| Battery backup with PRO3 card.
---|---
Rack units:| 4RU
Material| Sheet metal enclosure in powder-coated sheet metal with lockable
plexiglass door. Tamper switch included.
Measure| Width: 482,5, height: 173 mm, depth: 108 mm
TECHNICAL DATA TAMPER SWITCH
| Name | T-Tamperswitch |
|---|---|
| Article number | A-0000000SAB01 |
| Type | Microswitch |
| Voltage | 12 V / 24 V |
ADDRESS AND CONTACT DETAILS
- Milleteknik AB
- Ögärdesvägen 8 B
- S-433 30 Partille
- +46 31 340 02 30
- www.milleteknik.se
- www.milleteknik.se