ELVITA CSF3600X Cooker Hood User Guide

CSF3600X
Quick start guide
Cooker hood

CSF3600X Cooker Hood

This is a quick start guide. For your convenience, you can find the user manual online, with full information about installation, usage, maintenance, and troubleshooting. Please go to elvita.se and use the search function and the product’s model code to find the manual. To find the model code, see the instructions in the section “Find the model code”,

READ THIS!
WARNING!
Read the safety information and the full instructions before installing or using this product.
Find the full instructions
You will find the full and most recent user information for your product model on the web page www.elvita.se. This includes details about installation, usage, maintenance, and troubleshooting. You will need the model code to search for the information.

Find the model code
The model code is printed on a label on the product.
NOTE!
This product and label text are examples. Your product and text may have a different look and content.

SAFETY

Carefully read the instructions before you install and use the product. Save the instructions and keep them near the product for future reference. All kinds of warranties shall be invalid if these instructions are not followed.

Admonitions

**| DANGER!
Used when there is a risk for personal injury or death.
---|---
**| WARNING!
Used when there is a risk for personal injury.
**| CAUTION!
Used when there is a risk of damage to the product.
**| NOTE!
The general information that you should be aware of.
****| Helpful tips that you may find useful.

Intended use

• This product is only intended for household use in normal home cooking. Any other use may result in malfunction and the warranty will be void.

Safety for children and people with disabilities

DANGER!
Warning – Choking hazard!

• Remove the packaging material, as it can be dangerous for children. Never allow children to play with packaging materials.
• Keep carbon filters away from children.

WARNING!
This product must only be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the product and understand the hazards involved.

WARNING!

• Do not let children play with the product.
• Do not let children clean the product without supervision.
• Do not let children tamper with the product.
• Do not let children perform user maintenance operations without supervision.

General safety

DANGER!
Electrocution hazard!
A malfunctioning product may cause electric shock. If the product is malfunctioning, remove the plug from the socket, switch off the circuit breaker, and contact support.  Never turn on a malfunctioning product.

DANGER!
Electrocution hazard!

• Water leaking into the product may cause electric shock.
• Do not use high-pressure cleaners or steam cleaners to clean the product.

WARNING!
Risk of physical injury!

• Do not place any objects on the product. Objects placed on the product may fall over.
• Do not look into the source of LED light for longer than 100 seconds. LED light is very bright and may damage the eyes (risk group 1).

WARNING!
If the power cord is damaged, it must be replaced by its manufacturer or its authorized technical service or a qualified electrician, in order to avoid any dangerous situation.

WARNING!
In case of a fire adjacent to the product, unplug the product and turn off the main switch.

Safety during installation

DANGER!
The danger of physical injury!

• Use protective gloves throughout the installation of the product. There is a danger of physical injury due to sharp edges.
• Assembly of safety bolts and covers must be performed as specified in the user manual to prevent the product from loosening and falling down.

WARNING!

• All electrical wiring must be installed by a qualified electrician.
• Installation by unauthorized persons could lead to poor operation performance, damage to the product, and accidents.
• Do not plug in the product before the installation.
• Make sure that the installation area allows the user to easily unplug the power cord in case of danger.
• The power cord must be plugged into a grounded power outlet. The power cord of the product is fitted with a grounded plug.
• Do not expose the power cord to jamming or crushing during installation.
• Do not place the power cord near the cooker. There is a risk of heat from the cooker melting the power cord, which may lead to fire.
• The usage voltage of the product is 220-240 V, ~50-60 Hz.
• In the hood system, only use fuses with a maximum rating of 6 A.

WARNING!

• Comply with the rules and instructions regarding the discharge of outgoing air, stipulated by the relevant authorities. This warning does not apply to uses without a flue.
• When the product is used simultaneously with devices that use gas or other fuels, the negative pressure in the room must not exceed 4 Pa (4 X 10 bar).
• Gas or fuel oil-burning products, such as room heaters, which share the same space as your product, must be fully insulated from the exhaust of this product or they must be airtight.

WARNING!

• When you make a flue connection for your product, use a pipe with a diameter of 120 mm. The length of the duct connection as well as the number of elbows must be as minimum as possible.
• Do not connect the air outlet pipe of this product to air ducts that may contain smoke from other sources, for example, devices that use gas or other fuels.
• The minimum distance between this product and any electric cooker shall be 45 cm.
• The minimum distance between this product and any gas cooker or cooker burning other fuels shall be 70 cm.

Safety during operation

DANGER!
Warning – Death hazard!
Combustion gases may cause life-threatening danger due to poisoning. Ventilated combustion products, for example, heaters (shower heaters, water heaters, other heaters) burning gas, oil, wood, or coal, use air from their surroundings for combustion and discharge the waste gas through a waste gas system (for example a flue). When a cooker hood is active, it pulls in air from the kitchen and neighboring rooms. If a sufficient air supply is not provided, negative air pressure will occur, causing the toxic combustion gas in the flue and waste gas channel to flow back into the room. During simultaneous use of the cooker hood’s air discharge outlet and any ventilated combustion product, make sure there is enough air inflow.

WARNING!
Risk of fire!

• Clean the grease filters once a month. The oil residue in the grease filters may catch fire.
• Never operate the product without the grease filters.
• Never work with an open flame (for example flambé) near the product. The oil residue in the grease filters may catch fire.
• Do not install the product near a heater burning solid fuel (for example wood or coal) unless it has a non-removable cover. Ensure that no sparks can shatter.
• Never leave hot oils and fats unattended. They can easily start a fire. If a fire starts, turn off the cooker, and kill the flames carefully using a cover, fire blanket, or a similar material.
• Never try to put out the fire with water.
• Operate gas cookers only when there is a cooking pot on them. Otherwise, they can create high heat during operation which can lead to a damaged or burned cooker hood.
• Never operate two gas cookers (or a large burner over 15 kW, for example, a wok pot) longer than 15 minutes on a high flame setting. Operating multiple gas cookers simultaneously creates high heat which can lead to a damaged or burned ventilation product.

WARNING!

• Be careful when using the product simultaneously with combustion products, for example, heaters that use gas, diesel fuels, coal, wood, etc., which use air from the same  space. The cooker hood leads away air from the shared space and could adversely affect the combustion. This warning does not apply to uses without a flue.
• When the product is used simultaneously with products that use gas or other fuels, there must be sufficient ventilation in the room.
• The product should be cleaned regularly. There is a risk of fire if the product is not cleaned regularly

WARNING!
In case of deflagration, turn off the product and cover the flame. Never use water to extinguish a fire.

WARNING!

• Do not use non-fire-resistant filtering materials instead of the filter.
• Do not operate the product without a filter, and do not remove the filters when the product is in operation.

WARNING!
Do not touch the product’s lamps when they have been on for a long time. The lamps will be hot and may burn you.

WARNING!

• Do not cook flammable foods under the product.
• Do not start the product before the cookware is placed on the stove.
• Turn off the cooker’s burner before removing the cookware.
• Do not leave boiling oil on the stove. Pots that contain boiling oil may catch fire by themselves.
• Since oils could catch fire when cooking fried foods, in particular, be careful about curtains and tablecloths.
• Cookware and accessible parts of cooking products may become very hot during use. Be careful not to touch hot parts.

WARNING!
When the bulbs of the product malfunction, switch off the circuit breaker and unplug the product’s power plug from the socket. Replace the defective bulbs immediately (leave bulbs to cool down first), in order to protect the remaining bulbs against overloading.

CAUTION!

• Do not leave the product turned off while cooking. Not using the product while cooking increases the risk of condensate forming, which may cause corrosion.
• Moisture intruding into electronic parts poses a risk of damage.

CAUTION!
Do not keep flammable and/or heavy decorative items on the product.
CAUTION!
Replace any cracked protective shield.

DANGER!
Risk of fire and physical injury!
Only authorized service technicians may repair the product. Always disconnect the product from the power supply before repairing the product.

DANGER!
Electrocution hazard!

• Only authorized service technicians may repair the product.
• If you experience problems with the product, please see if the user instructions and troubleshooting information in the user manual can help you find a solution. If the  problem persists:
  – turn off the product,
  – unplug the product from its power supply, and
  – contact support.

DANGER!

• Never wash the carbon filters.

WARNING!
Risk of burn and risk of electric shock!

• Before cleaning or performing maintenance, let the product cool down and disconnect the product and any other cooking devices from the power supply.
• Do not clean the control components with a wet cloth. There is a risk of damage due to the ingress of moisture into parts containing electronics.
• Do not use a stainless steel cleaner for the control elements.

WARNING!

• If the product is faulty or damaged, disconnect the product from the power supply and call an authorized service provider.

CAUTION!

• Clean stainless steel surfaces only in their brushing direction otherwise the surface could be damaged.
• Never use aggressive and abrasive cleaning agents because the surface of the product could be damaged.

Disposal

Dispose of packaging in an environmentally-friendly manner. Recycling packaging, while observing national and local regulations, can reduce the consumption of raw materials and the amount of waste in landfill sites.
This product is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). The symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact the relevant municipal body in charge of waste management, your household waste disposal service, or the store where you purchased the product.

QUICK START
Using the cooker hood

After using the cooker hood

GETTING TO KNOW YOUR COOKER HOOD

Hood overview

A. Controls
B. Body
C. Lamps
D. Metal grease filter

Controls

A. Fan, off
B. Fan setting, 1st-speed level
C. Fan setting, 2nd-speed level
D. Fan setting, 3rd speed level
E. Lamp, on/off

Installation parts

A. Flue connection sheet
B. Internal flue cover
C. External flue cover
D. Hood body
E. Ø 6 mm wall plug
F. Ø 10 mm wall plug
G. 5.5 x 60 mm wall mounting screw
H. 3.9 x 22 mm flue connection sheet screw
I. 3.5 x 9.5 mm flue connection screw
J. Flue flaps
K. Installation template

USING THE COOKER HOOD

Turn on and turn off the cooker hood
The cooker hood has three fan speed levels.

1. To turn on the cooker hood
   • on the 1st fan speed level, press .
   • on the 2nd fan speed level, press .
   • on the 3rd fan speed level, press ****.

2. To turn off the cooker hood, press.

Turn on and turn off the lamp
1. To turn on the lamp, press .
2. To turn off the lamp, press .

Save energy

Here are some recommendations for how you can save energy.

• Ensure there is adequate air inlet to enable your hood to work efficiently with low operating noise.
• Adjust the fan speed level according to the amount of steam brought on by your cooking. Use the higher setting only when needed. A lower fan setting means less energy consumption.
• If you expect your cooking to bring about a high amount of steam and smoke, select a higher fan speed level beforehand. The hood has to run for a much longer duration in order to clear kitchen smoke and/or steam that is already spread in the kitchen.
• Turn off the hood when it is not needed.
• Clean the metal grease filters regularly, this way you can increase ventilation efficiency and avoid a fire hazard.
• For installations with carbon filters, replace the carbon filter every 3 months.

INSTALLATION

Unpack the cooker hood

DANGER!
Warning – Choking Hazard
Remove the packaging material, as it can be dangerous for children. Never allow children to play with packaging materials.

1. Check the packaging and product for any damage. If the packaging or product is damaged, contact the transport operator and the retailer where the product was purchased.

Installation options and requirements
This cooker hood can be installed without a carbon filter or with a carbon filter. In flue-connected use, the cooker hood must be connected to a flue that will discharge the air outdoors.

DANGER!
Warning – Death hazard!
Combustion gases may cause life-threatening danger due to poisoning. Ventilated combustion products, for example, heaters (shower heaters, water heaters, other heaters) burning gas, oil, wood, or coal, use air from their surroundings for combustion and discharge the waste gas through a waste gas system (for example a flue). When a cooker hood is active, it pulls in air from the kitchen and neighboring rooms. If a sufficient air supply is not provided, negative air pressure will occur, causing the toxic combustion gas in the flue and waste gas channel to flow back into the room. During simultaneous use of the cooker hood’s air discharge outlet and any ventilated combustion product, make sure there is enough air inflow.

WARNING!

• Comply with the rules and instructions regarding the discharge of outgoing air, stipulated by the relevant authorities.
• When you make a flue connection for your product, the length of the duct connection as well as the number of elbows must be as minimum as possible. Minimizing the way from the flue to the pipe system maximizes the operating efficiency of the cooker hood.

WARNING!
Do not connect the pipe to:

• A flue is used for discharging fume generated by products that use gas or other fuels.
• Air ducts that could contain smoke.

Installation without carbon filter
The absorbed air is cleaned by the grease filters and is discharged through a piping system.

Installation requirements:

CAUTION!
Exhaust air must not be transferred to;

• An active smoke flue;
• An active waste gas flue;
•  A flue is used for the ventilation of spaces where heat sources are installed.
• If the installation requires the transfer of exhaust air to an inactive smoke or waste gas flue, permission must be obtained from an authorized chimney sweep.
• If the exhaust air is discharged through the external wall, a telescopic wall safe must be used.
• Consult an authorized retailer to know the different opportunities available for flue connection. Accessories required for flue connection can be bought from an authorized service provider.

Installation with carbon filter
The absorbed air is cleaned by the grease filters and an active carbon filter and is transferred back to the kitchen.

Installation requirements:

• An active carbon filter must be installed, in order to catch substances that cause a stink in the circulating air.
• Consult an authorized retailer to know the different opportunities available for enabling the cooker hood to function in circulating air mode. Accessories required for this process can be bought from an authorized service provider.

Installation area
Make sure to place the cooker hood considering the measurements and other factors described in this section.

WARNING!
Make sure that the installation area allows the user to easily unplug the power cord.

WARNING!

• Comply with the rules and instructions regarding the discharge of outgoing air, stipulated by the relevant authorities. This warning does not apply to uses without flue.
• When the product is used simultaneously with devices that use gas or other fuels, the negative pressure in the room must not exceed 4 PA (4 X 10 bar).
• Products burning gas or fuel oil, such as room heaters, which share the same space as your product, must be fully insulated from the exhaust of this product or they must be airtight.

WARNING!

• The minimum distance between this product and any electric cooker shall be 450 mm.
• The minimum distance between this product and any gas cooker or cooker burning other fuels shall be 700 mm.

Mount the cooker hood on the wall

WARNING!

• The minimum distance between this product and any electric cooker shall be 45 cm.
• The minimum distance between this product and any gas cooker or cooker burning other fuels shall be 70 cm.

**** Place a protective cloth on the hob during the installation of the cooker hood.

Mount the cooker hood body on the wall

1. Place the installation template on the surface where the product is to be installed. Mark the holes for drilling using the attached template and a pencil.
2. Drill 2 holes with a 10 mm diameter on the points marked as A, and B on the installation template.
3. Insert the 2 wall plugs with a 10 mm diameter in the drilled holes.
4. Screw a 5.5 x 60 screw into each plug. Leave a 5 mm gap between the screw head and the wall.
5. Hang the cooker hood on the 2 screws.
   NOTE! For installations without a carbon filter, install the flue flaps and the flue. See the section “Install the flue flaps”, page 19 and section “Install the flue”, page 19

Mount the flue on wall

1. Drill 2 holes with a 6 mm diameter on the points marked as C, and D on the installation template.
2. Insert the 2 wall plugs with a 6 mm diameter into the drilled holes.
3. Place the flue connection sheet on the surface where the screws will be installed and screw a 3.9×22 screw into each plug.
4. Install the internal- and external flue covers.
5. Use two 3.5 x 9.5 screws to secure the internal flue cover of the flue to the flue connection sheet.
6. Use two 3.5 x 9.5 screws to secure the external flue cover to the hood body.

Install the flue flaps

For installations without a carbon filter.

1. Insert the pin into the socket.
   CAUTION! The tabs on the pins should be facing upward.

2. Bend the flap lightly and insert the other pin into the other socket.

3. Repeat steps 2 and step 3 for the other flap.

Install the flue
For installations without carbon filters.
In flue-connected use, the cooker hood must be connected to a flue that will discharge the air outdoors. Minimizing the way from the flue to the pipe system maximizes the operating efficiency of the cooker hood.

WARNING!

• Comply with the rules and instructions regarding the discharge of outgoing air, stipulated by the relevant authorities.
• When you make a flue connection for your product, use a pipe with a diameter of 120 mm. The length of the connection and the number of elbows must be as minimum as possible.

WARNING!
Do not connect the pipe to:

• A flue is used for discharging fume generated by products that use gas or other fuels.
• Air ducts that could contain smoke

1. Put the flexible aluminum pipe on the plastic flue outlet.
   WARNING!
   • Avoid twisting and bending the aluminum pipe as much as possible. Twists and bends in the aluminum pipe will reduce the air suction power.

2. Fasten the flexible aluminum pipe to the plastic flue outlet using a flue clamp.
   WARNING! Install the air exit canal with a small downward inclination (1° inclination) from the cooker hood.
   There is a risk of damage due to condensate liquid backflow.

3. Fasten the other end of the flexible aluminum pipe to the flue connection on the wall using a flue clamp.

Electrical wiring

WARNING!
All electrical wiring must be installed by a qualified electrician.

WARNING!

• Installation by unauthorized persons could lead to poor operation performance, damage to the product, and accidents.
• Do not plug in the product before the installation.
• Make sure that the installation area allows the user to easily unplug the power cord in case of any danger.
• The power cord must be plugged into a grounded power outlet. The power cord of the product is fitted with a grounded plug.
• Do not expose the power cord to jamming or crushing during installation.
• The power cord must not be placed near the cooker. There is a risk of heat from the cooker melting the power cord, which may lead to a fire.
• Never turn on a malfunctioning product, in order to avoid any dangerous situation. If the product is malfunctioning, pull the power plug and switch off the circuit breaker, and contact support.
• The usage voltage of the product is 220-240 V, ~50-60 Hz.
• In the hood system, only use fuses with a maximum rating of 6 A.

Thank you
for your trust and the purchase of our product. This quick start guide is supplied to help you get started using this product.
Make sure you have received an undamaged product. If you do find transport damage, please contact the seller from which you purchased the product, or the regional warehouse from which it was supplied.

Language: en-GB, sv-SE, nb-NO, da-DK, fi-FI, is-IS
Publication date: 2022-10-12
This document and its content, including written material and images, are the property of Elon Group AB.
You may not copy, reproduce, modify, republish or distribute this document or any of its content without express written permission from Elon Group AB. © 2022, Elon Group AB. All rights reserved.

The information may be subject to changes. Inadvertent errors in information may occur.

Elvita products are distributed and marketed by Elon Group AB.
ELON GROUP | +46(0)10-220 40 00 | ELONGROUP.SE
Support and service: ELVITA.SE

Documents / Resources

| ELVITA CSF3600X Cooker Hood [pdf] User Guide
CSF3600X, Cooker Hood, CSF3600X Cooker Hood
---|---

References

• Köksvaror, vitvaror och elektronik för hela hemmet - Elvita
• Köksvaror, vitvaror och elektronik för hela hemmet - Elvita

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>