Anker 511 Chargers (Nano) A2633 User Manual
- June 13, 2024
- Anker
Table of Contents
Anker 511 Chargers (Nano) A2633
USER MANUAL
Using Your Product
For the fastest and safest charge , use an Akert@ cable, your device original cable or another certified cable ( such as MFI)
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 25°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone
- 1 800 988 7973
This device complies with Industry Canada license-lCES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-3(B)/NM8-3(B).
Specifications
| Input | 100-240V == 0.6A 50-60Hz |
|---|---|
| USB-C Output | 5.0 V=3.0 A |
9.0 V=2.22 A
Anker Innovations Limited
Room 1318-19, Hollywood Plaza,
610 Nathan Road, Mongkok, Kowloon, Hong Kong
CE POC
Name: Anker Innovations Deutsch land GmbH
Address: Georg-Muche-Stra?e 3-5, 80807 Munchen
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Customer Service
support@anker.com
(US)+ 1 (800) 988 7973 Mon -Fri 9:00am -5 00pm (PT)
(UK) +44 (0) 1604 936200 Mon -Fri 6:00 – 11:00 (GMT)
(DE) +49 CO) 69 9579 7960 Mo -Fr 6:00 -11:00
C El:$: J 03 4455 7823 ,El -‘iE 9 oo -17:00
C ‘1’1ll J +86 400 0550 036 /lil-‘i’/IHi 9 oo -17:30
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
For FAQs and more information, please visit:
anker.com/support
DOWNLOAD
Anker 511 Chargers (Nano) A2633 User Manual – [Download PDF]
Anker 511 Charger (Nano) A2633 DoC – [Download PDF]