BEGA 67936 Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 67936 Ceiling and Wall Luminaire
Product Information
- Product Name: Lamp Luminaire
- Lamp Type: Screw base E 27
- Lamp Output: Maximum 60 W
- Energy Efficiency Class: E
- Luminaire Efficiency: 59%
Product Usage Instructions
- Safety Precautions:
- The installation and operation of this luminaire must comply with national safety regulations.
- Only a qualified electrician should perform the installation and commissioning.
- The manufacturer is not liable for any damage caused by improper use or installation.
- If modifications are made to the luminaire, the person responsible for the modifications is considered the manufacturer.
- Glass Installation:
- Place the glass onto the luminaire housing.
- Ensure that the holding springbolts fit into the notches of the glass.
- Turn the glass clockwise to lock it securely and prevent vibrations.
- Glass Removal:
- To release the glass from the luminaire housing, turn it counter-clockwise.
- Optional Accessories:
- Metal trim rings in four different surfaces are available as optional accessories.
- Trim rings must be ordered separately.
- Replacement Parts:
- Spare Glass – Part No: 11 002 872 .0R G
- LED Lamp 2700 K – Part No: 13 548
- LED Lamp 3000 K – Part No: 13 586
- Lampholder – Part No: 63 000 052
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass
and metal housing, for all lighting tasks in interior applications.
They are ideal for places where a soft and uniform lighting distribution is
required. Luminaire with a high protection class.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 60 W
- This product contains light sources of energy efficiency class E
Supplied lamp
- BEGA LED lamp 13548
- LED Retrofit 7 W · 805 lm · 2700 K dimmable
Supplied lamp
- BEGA LED lamp 13586
- LED Retrofit 7 W · 805 lm · 3000 K dimmable
- Luminaire efficiency: 59%
- Detailed technical and lighting data for the
- lamps can be found in the data sheets on our website.
Product description
- Aluminium alloy housing, finish Colour white
- Hand-blown opal glass, satin matt, with sliding-bolt closure
- 2 mounting holes ø 6mm
- Distance apart 147 x 147mm
- 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@
- Connection terminal 2.5@
- Earth conductor connection
- Lampholder E 27
Safety class I
- Protection class IP 44
- Protected against granular foreign bodies
- ≥ 1 mm and splash water Impact strength IK03
- Protection against mechanical impacts < 0.35 joule
- – Safety mark
- – Conformity mark
- Weight: 1.8 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
- Lead the mains supply cable through the cable entry into the luminaire housing.
- For wall installation note position of application of luminaire »arrow down«.
- Fix luminaire housing with enclosed or any other suitable fixing material on to the mounting surface.
- It is imperative to use the enclosed gaskets.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection to the terminal.
- Insert the lamps.
- Insert the opal glass into sliding bolt glass closure and turn clock-wise up to the stop.
- Place glass to the luminaire housing and observe that the holding springbolts fit into the notches of the glass.
- Turn the glass clockwise until it is locked.
- Thus, you reach a safe and vibration-resistant holding of the glass.
- To release the glass from the luminaire housing, turn it counter-clockwise.
Relamping · Maintenance
- Disconnect from main supply.
- Unscrew glass from luminaire housing by turning it counter-clockwise.
- Clean glass and luminaire regularly with solvent-free cleansers from dirt.
- Change the lamp.
- Screw in glass by turning it clockwise beyond the stop.
Accessory · Trim rings
- For this luminaire metal trim rings in 4 surfaces are optional available.
- Trim rings are accessories and must be ordered separately.
- Item Part. No
- Colour white 13 062
- Stainless steel 13 063
- Chrome 13 064
- Brass 13 065
Spares
- Spare glass 11 002 872 .0RG
- LED lamp 2700 K 13 548
- LED lamp 3000 K 13 586
- Lampholder 63 000 052
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>