Dongguan PC368A Wireless Keyboard User Manual

Dongguan PC368A Wireless Keyboard

PACKING LIST

1. Keyboard x l
2. USB Receiver x l
3. UserManual x l
   (Stored in the battery compartment)

INSTRUCTIONS

Initial use

1. Put 1 x 1.5V AAA dry cell batteries into the keyboard according to the correct polarity and turn on the keyboard switch.
2. Take out the receiver from the bottom of the keyboard and plug it into the USB port of your laptop.
3. Wait for the computer to install the driver automatically, and you can use the product after that.

MODE SWITCH

BT1 Mode

1. Short press the BT1 mode switch button and its indicator will flash slowly showing that the keyboard is in BTI mode.
2. Long press the BTl mode switch button for 3s to 5s and its indicator will flash quickly showing that the keyboard enters a pairing state. Turn on the Bluetooth of your laptop, if your computer system is Win 7 or earlier, please select to connect “BT3.0 Keyboard”. If your computer system is Win 8 or later, please select to connect “BT5.0 KB”. You can start using it after a Successful connection.

BT2 Mode
Please refer to BT1 connection instructions.

DIAGRAM

1. Multi-mode Switch: The product supports 2.4G. BT1 and BT2 connection. It can be connected with and control 3 devices. Users can switch modes via the corresponding mode switch button to control the corresponding device.

   • Press the 24G mode button . the 2.4G mode indicator light on the top right turns on, indicating that the keyboard is in 2.4C control mode at this time.
   • Press the BT1 mode button , and the BT1 mode indicator light on the top right turns on, indicating that the keyboard is switched to BT1 control mode.
   • Press the BT1 mode button . the BT1 mode indicator light on the top right turns on, indicating that the keyboard is switched to BT1 control mode.

2. Key combination function:

   • Search function

   • FN +
     Lock the Fl-Fl2 function, after locking, press Fl-Fl2 directly for the combination key function.

   • Press FN + again
     Unlock the Fl – Fl2 function. restore Fl-Fl2 to normal function.

3. Independent multimedia functions:

NOTE:
The multimedia function is not available for Mac OS.

TROUBLESHOOTING

The solution to Keyboard’s 2.4G mode connection issue

1. Turn the keyboard switch off and then turn it back on and switch the keyboard to 2.4G mode.
2. Press the ” ESC” + “=” button and release until the indicator of 2.4G mode flashes.
3. Plug the receiver into the computer. It is successfully connected when the indicator of 2.4G mode stops flashing. It can work then.

The solution to the keyboard’s BT1( Bluetooth) mode connection issue

1. Clear the Bluetooth connection list of the computer.
2. Turn on the power switch and switch it to BT1 mode
3. Long press the button of BTI mode for over 3s and release until its indicator Light flashes.
4. Turn on the Bluetooth of the computer. If your computer system is Win 7 or earlier, please select to connect “BT3.0 Keyboard”. If your computer system is Win 8 or later. please select to connect “BT5.0 KB. The keyboard’s BTT mode can work after a successful connection.

BT2( Bluetooth) Mode: refer to BTI mode solutions.

The keyboard response is delayed and works abnormally, how to solve it?

1. Maybe the dry battery power is insufficient. please replace the battery for the keyboard.
2. May be caused by computer lag. please restart the computer and try it again.
3. The maximum use distance of this product is 1OM, please keep it within 10M, and do not have metal obstacles between the keyboard and receiver.

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>