anko 42976622 Clock Radio with White Noise Instruction Manual
- June 5, 2024
- Anko
Table of Contents
Clock Radio with White Noise
Operating instructions
Includes:
- clock radio with white noise
- charging cable
- (USB cable) ) user manual
Function overview:
- LCD Display
- Mode
- Set 7
- Up/Light
- Down/Alarm
- Lighting Touch Control
- Battery Compartment
- Light Panel
How to use this product: Function Operation
Mode Button
- By default, this product is in clock mode. Press the MODE button to change modes.
- The mode order is Clock – White Noise – FM Radio – Clock.
Set Button
- In Clock mode. press and hold the SET button for 2 seconds till the LCD shows flashing 12H” or “24H”, indicating it’s now In setting mode. Press UP/DOWN to choose from a 12H or 24H time display. Press the SET button again, in turn, to change the setting of an hour/minute/alarm hour/alarm minute/alarm sound/bock to the clock display.
- In FM mode. Press the SET button to change to the next channel.
- In White Noise Mode, press SET to enter White Noise Volume changing.
- In Clock mode. touch the lighting touch control area of the bock of the light panel to turn the light ON/OFF. Press the SET button to switch the light color.
Note: The light can be turned on in all modes, the brightness and color can only be changed while in clock mode.
Lighting Touch Control
- In any mode. press the touch control area to turn ON/OFF the light.
- When the alarm sounds, press the light to touch the control area to snooze for 5 minutes. A flashing snoozing symbol will show up on the LCD display ****
The default state of this device:
- 12hr display, when time turns 12:00. the time (AM) symbol will appear.
- Light panel brightness: 50%
- Alarm Is of
- Alarm time: 6:00 am
- When the unit is powered on. LCD display turns on with full display and bird sound.
Time and alarm setting
-
In Clock mode. press and hold the SET button to enter the time setting in sequence: 12/24hr setting – hour set – minute setting – Alarm hour setting -Alarm minute setting – Alarm sound selection (10 white noise or FM radio)- Bock to the clock display.
Note: If the ()Ion sound is set to FM by default. the FM alarm sound is the last FM channel listened to. If the channel Is not your preferred channel, please go to FM mode to change to your preferred channel and then exit and repeat the alarm setting. -
The setting item flashes, press the UP/LIGHT button or DOWN/ALARM button to change. Press the SET button to confirm each setting.
-
No operation in 15 seconds, the device exits setting mode and the setting values are saved.
-
Under Clock mode. Press the DOWN/ALARM button to turn on/off the alarm in sequence: Alarm on – Alarm off.
Note: if the LIGHT is on. please tum the light of first. -
When the alarm sounds, press the DOWN/ALARM button to turn the alarm off. or press the light touch control to enter snooze, the snooze symbol appears and flashes. The alarm sounds again after 5 minutes. press any other button to turn the alarm off.
-
If there Is no operation when the alarm sounds, the alarm sound lasts for 5 minutes and then turns off. The Lights will turn off too. If the alarm sound is Radio. it will remain on after the 5 minutes.
Notes: When the light panel is off. if the alarm time is set to above 20 minutes. the light panel turns on gradually 20 minutes before the alarm sounds. When the set alarm time Is reached. the light panel turns on to full brightness and sounds the preset alarm sound/ Radio. If the setting time to alarm time is within 20 minutes, the light panel turns on immediately when the alarm sounds.
LCD Display Backlog
- When powered by batteries, press the UP/LIGHT button to turn on the LCD display backlight for 15 seconds.
- When powered by the USB Cable. the LCD display backlight will remain ON.
Liga Effect
- Touch the light control area to turn the light ON/OFF in any mode.
- The default light is in warm white color. 50% brightness, after that It will keep the lost records before it was turned oft e.g., it’s blue light and full brightness, if we turn off the light and turn it on again, it will keep blue light and full brightness.
- When the lights are on, press SET to switch the light colors in sequence: worm white – circular Light display: red – yellow – green – blue – purple – light blue-white.
- When it’s under the circular Light display, each light colour will remain on for 10 seconds and then gradually change to the next colour in the sequence.
- Press the UP/LIGHT or DOWN/ALARM button to increase or decrease the light brightness by 10% from 10% to 100% or 100% to 10%.
Note: please set Light color and brightness in Clock mode. If you are in another mode like White noise or FM mode, please exit first.
White Noise Mode
- In Clock mode. Press the MODE button to enter white noise mode.
- The default is Music 1. and playtime is 10 minutes.
- Press UP or DOWN to change to the previous or next music setting. Press the SET button to enter the volume setting. Press UP/DOWN to adjust Volume between V:01-V:03. Press SET again to return to Music selection.
FM Radio
- On the time display interface, press the MODE key twice to enter the Radio mode. To exit Radio mode, press MODE again. When you enter Radio mode again, it automatically plays the last set channel.
- In Radio mode, press the SET button to search for the next channel.
- Press the UP or DOWN button to increase/decrease radio volume.
- When adjusting the volume, the volume will be displayed at the Alarm minute position. The default volume is 10. and the volume range is 00-15.
Radio and white noise sound play conflict
- If you are listening to the rodeo with the alarm set to radio function, the radio will continue to play and the alarm symbol will flash on the screen.
- When Alarm clock mode is set with white noise, and you are listening to the radio. The speaker will exit the radio and play white noise. The alarm symbol flashes on the screen.
Specifications:
Model No: 42976622
USB Charging Input: 5V/1.2A (please use provided charging cable only)
Backup Battery: 4 X AA (Not included)
Output Power: 0.5W
LCD Display: 1.49 Inches
Frequency Response: 10Hz-20kHz
FM Frequency: 87.5Hz-108MHz
12-month warranty
Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new
product to be free from defects in materials and workmanship for the period
stated above, from the date of purchase, provided that the product is used in
accordance with the accompanying recommendations or instructions where
provided. This warranty is in addition to your rights under the Australian
Consumer Law.
Kmart will provide you with your choice of a refund, repair, or exchange
(where possible) for this product if it becomes defective within the warranty
period. Kmart will bear the reasonable expense of claiming the warranty. This
warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse, or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at kmart.com.au for any difficulties with
your product. Warranty claims and claims for expenses incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
WARNING Do not dispose of unit in fire or water ) Never attempt to disassemble and reassemble. ) Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. > Check with your local authority for recycling advice. ) Keep your device and all accessories out of the reach of children and animals. ) Small parts may cause choking or serious injury if swallowed. ) Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 45°C). > Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. ) Do not allow your device to get wet liquids that can cause serious damage. ) Do not handle your device with wet hands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>