PERRIN AND ROWE TAR18W1HTEG Armstrong Sinlge Function Instruction Manual

Table of Contents

Specifications
- Product Name: Volume Control or Diverter Trim
- Style: Varies by model

Helpful Tools
- For safety and ease of installation, the use of the following helpful tools is recommended: Segueta
Installation Steps
- Step 1: Remove and discard the valve body dust cover to begin trim installation.
- Step 2: Measure the required dimensions for installation:
- A: 15-20mm
- B: 30-40mm
- Step 3: If a gap remains once the handle is installed, follow these steps:
- Measure the distance from the finished wall to the handle base.
- Uninstall the Handle Assembly and Wall Escutcheon.
- Once the measurement is defined, remove the spindle and carefully use a hacksaw to trim off the extra threads of the valve and spindle. Ensure the lengths are within the tolerances detailed above.
- Reinstall the Wall Escutcheon and Handle Assembly.
- The trim should now be flushed with the finished wall.
FAQ
- Q: Where can I find support for U.S. customers?
- A: U.S. customers can visit houseofrohl.com/support. or call 1-800-777-9762 for support.
- Q: Where can I find support for Canadian customers?
- A: Canadian customers can visit houseofrohl.ca/support or call 1-866-473-8442 for support. For Ontario customers, call 1-800-287-5354.
- Q: Are the O-rings available for all models?
- A: The O-Ring is only available for certain models. Please refer to the parts list for more information.

For safety and ease of installation, the use of these helpful tools is recommended. $PERRIN-AND-ROWE-TAR18W1H-TEG-Armstrong-Single-Function-FIG-1 $1$$

$PERRIN-AND-ROWE-TAR18W1H-TEG-Armstrong-Single-Function-FIG-1 $2$$

A. Wall Escutcheon & O-Ring
B. Handle Assembly
- O-Ring is only available on certain models.
- The faucet component comes in various configurations.

CAUTION — TIPS FOR REMOVAL OF OLD FAUCET:

Always turn the water supply OFF before removing the existing faucet or disassembling the valve.
Open the faucet handle to relieve water pressure and ensure that complete water shut-off has been accomplished.

Remove and discard valve body dust cover to begin trim installation. $PERRIN-AND-ROWE-TAR18W1H-TEG-Armstrong-Single-Function-FIG-1 $3$$
Install Wall Escutcheon & assembled O-Ring (A)* onto valve.
Install Handle Assembly (B) onto valve. Style varies by model. $PERRIN-AND-ROWE-TAR18W1H-TEG-Armstrong-Single-Function-FIG-1 $5$$
If a gap remains once the handle is installed, measure the distance from finished wall to handle base.
Uninstall the Handle Assembly and Wall Escutcheon.
Once the measurement is defined, remove the spindle and carefully use a hacksaw to trim off the extra threads of the Valve and spindle.
Please ensure the lengths are within the tolerances detailed above. Reinstall Wall Escutcheon and Handle Assembly. Trim should now be flushed with finished wall.
Installation is complete. $PERRIN-AND-ROWE-TAR18W1H-TEG-Armstrong-Single-Function-FIG-1 $7$$