BEGA 33814 Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 33814 Wall Luminaire
Product Information
The Wandleuchte Wall luminaire Applique is a shielded wall luminaire with symmetrical light distribution. It is designed for installation on columns and wall faces. The luminaire is made of aluminium alloy and features safety glass with an optical structure. It has a distance of 85 mm between the upper and lower parts. The luminaire includes a silicone seal, reflector made of anodized pure aluminium, and an LED power supply unit. The luminaire operates on a voltage of 220-240 V and frequency of 50-60 Hz. It is DALI-controllable and has 1 DALI address. The luminaire has basic insulation between the mains and control lines to protect temperature-sensitive components without switching off the luminaire. It has a safety class of I and protection class of IP 64, making it dust-tight and protected against splash water. The luminaire has an impact strength of IK06, providing protection against mechanical damage. The luminaire weighs 1.2 kg and is available in graphite or silver color. It is designed to emit light evenly and efficiently onto the surface to be illuminated, while emitting less than 1% of the luminous flux into the upper half-space of the luminaire. The electronic components in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
Product Usage Instructions
- The installation and operation of the Wandleuchte Wall luminaire Applique should be carried out in accordance with national safety regulations.
- Installation and commissioning should only be done by a qualified electrician.
- Avoid touching the light output opening of the LED directly during installation or relamping.
- Ensure that the seal is properly seated.
- Establish a protective earth connection between the upper and lower parts of the luminaire.
Note : The manufacturer does not accept liability for damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
DIMENSIONS
Instructions for use
Application
Shielded wall luminaire with symmetrical light distribution makes it
particularly well-suited for installation on columns and wall faces.
Product Description
- Luminaire made of aluminium alloy, aluminium and stainless steel
- BEGA Unidure® coating technology
- Colour graphite or silver
- Safety glass with optical structure
- Silicone gasket
- Reflector made of pure anodised aluminium 2 mounting holes ø 4.5 mm
- Distance apart 85 mm
- 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@
- Connecting terminal and earth conductor terminal 2.5@
- LED power supply unit
- 220-240 V x 0/50-60 Hz
- DALI-controllable
- Number of DALI addresses: 1
- Basic insulation is provided between the mains and control cables
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
- Protection class IP 64
- Dust-tight and protection against splash water Impact strength IK06
- Protection against mechanical
- impacts < 1 joule
- – Safety mark
- – Conformity mark
- Weight: 1.2 kg
This product contains light sources of energy efficiency class(es) D
Dark Sky
The light from this luminaire is directed evenly and highly efficiently onto
the surface to be illuminated and emits less than 1 % of the luminaire
luminous flux into the upper half-space of the luminaire.
Safety
- The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Installation
- LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
- In outdoor areas, the light emission may only be directed downwards.
- Undo the screws and lift off the luminaire top. Lead the mains supply cable through the cable entry of the luminaire base.
- Note position of application of the luminaire “arrow down”.
- Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
- Be sure to use the gasket rings supplied. Make the earth conductor connection and the electrical connection.
- For digital control please use the connecting terminal DA, DA.
- In case this terminal is not used the luminaire will be operated at full light output.
- In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
- Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
- Make sure that gasket is positioned correctly. Make earth conductor connection between luminaire top and luminaire base.
- Install the luminaire top, press-on and manually tighten screws evenly.
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
- Do not use high pressure cleaners.
Lamp
- Module connected wattage 7.8 W
- Luminaire connected wattage 9.7 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 55 °C
33 814 K3
- Module designation LED-1378/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 1255 lm
- Luminaire luminous flux 787 lm
- Luminaire luminous efficiency 81,1 lm / W
33 814 K4
- Module designation LED-1378/940
- Colour temperature 4000 K
- Colour rendering index CRI > 90
- Module luminous flux 1305 lm
- Luminaire luminous flux 832 lm
- Luminaire luminous efficiency 85,8 lm / W
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
- The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- Defective glass must be replaced.
- Close the luminaire.
Spares
- LED power supply unit DEV-0475/350
- LED module 3000 K LED-1378/930
- LED module 4000 K LED-1378/940
- Reflector 76 001 389
- Gasket 83 002 177
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com