BEGA 50184.4 Ceiling Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50184.4 Ceiling Luminaire for Indoor Use
Product Information
Safety
Overvoltage Protection
Spares
Product Usage Instructions
OVERVIEW
Instructions for use
Product description
Installation
Cleaning · Maintenance
Replacement of the LED module
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50184.4 Ceiling Luminaire for Indoor Use

Product Information

Module designation: LED-0689/930
Color temperature: 3000 K
Color rendering index (CRI): > 90
Module luminous flux: 775 lm
Luminaire luminous flux: 269 lm
Luminaire luminous efficiency: 44.8 lm/W
Lamp module connected wattage: 4.9 W
Luminaire connected wattage: 6 W
Rated temperature: 25-40°C
Ambient temperature: max 50.184.4 K3

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage Protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, it is recommended to use separate overvoltage protection components. You can find them on our website at www.bega.com.

Spares

Shield
LED power supply unit
LED module 3000 K

Part Number: 42 000 206 L8 DEV-0303/350 LED-0689/930

Product Usage Instructions

To use the luminaire, follow these steps:

Ensure the installation is performed by a qualified electrician to comply with safety regulations.
Connect the lamp module to the luminaire using the provided wattage specifications (4.9 W for the lamp module and 6 W for the luminaire).
Place the luminaire in a suitable location with an ambient temperature within the specified range (25-40°C).
Ensure overvoltage protection is in place to protect the electronic components of the luminaire.
Turn on the power supply to activate the luminaire.

Note: Any modifications to the luminaire should be performed by a qualified professional and may void the manufacturer’s liability.

OVERVIEW

BEGA-50184-4-Ceiling-Luminaire-for-Indoor-Use-
FIG-1

Instructions for use

Application
Ceiling luminaire indoor luminaire with aluminium housing for non-glare light deflected downwards.

Product description

Ceiling luminaire »STUDIO LINE«
Aluminium housing shield,
Finish Colour velvet black
inside hue matt brass
Light-diffusing silicone lens
Mounting plate with 2 fixing
holes ø 4.5mm · 60mm spacing
Connecting terminals 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V
Safety class I
- r – Safety mark
- c – Conformity mark
Weight: 0.3 kg

This product contains light sources of energy efficiency class(es) D

Lamp

Module connected wattage 4.9 W
Luminaire connected wattage 6 W
Rated temperature ta=25 °C
Ambient temperature ta max=40 °C

50 184.4K3

Module designation LED-0689/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 775 lm
Luminaire luminous flux 269 lm
Luminaire luminous efficiency 44,8 lm/W

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Pull off LED cover from mounting plate.Pass the power connecting cable through the cable entry in the mounting plate. Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface. Establish earth conductor connection andmake the electrical connection to the terminals. Clip LED cover onto mounting plate. Pass the enclosed housing shield over the LED cover until the housing shield latches in place audibly. BEGA-50184-4-Ceiling-Luminaire-for-Indoor-Use-
FIG-2

Cleaning · Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire. The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools. Disconnect the system. Pull the housing shield off the mounting plate. Open the luminaire. Please follow the installation instructions for the LED module. Close the luminaire. Pass the housing shield over the LED cover until the housing shield latches in place audibly.

Spares