BEGA 50847.2 Ceiling Luminaire Downlight Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
- BEGA 50847.2 Ceiling Luminaire Downlight
- Product Information
- Product Usage Instructions
- DIMENSIONS
- Instructions for use
- Product Description
- Safety
- Overvoltage protection
- Installation
- Cleaning · Maintenance
- Replacing the LED module
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BEGA 50847.2 Ceiling Luminaire Downlight
Product Information
Product Description| This luminaire is a high-quality LED light fixture
designed for
various lighting applications. It has a lamp module with a
connected wattage of 8.5W and a luminaire connected wattage of 10W.
The luminaire operates at a rated temperature and can be used in
ambient temperatures ranging from 25 to 50 degrees Celsius.
---|---
Safety| The installation and operation of this luminaire must comply
with national safety regulations. Only a qualified electrician
should carry out the installation and commissioning. The
manufacturer is not liable for any damage caused by improper use or
installation. Any modifications made to the luminaire should be
done by the person responsible for these modifications.
Overvoltage Protection| The electronic components in the luminaire are
protected
against overvoltage according to DIN EN 61547. For additional
protection against transients, it is recommended to use separate
overvoltage protection components, which can be found on the
manufacturer’s website at www.bega.com.
Product Usage Instructions
Installation
- Ensure that the luminaire is installed and operated in accordance with national safety regulations.
- Only a qualified electrician should perform the installation and commissioning.
- Avoid touching the light output opening of the LED directly during installation or relamping.
- Clean the luminaire regularly with solvent-free cleansers to remove dirt.
Replacing the LED module
- Locate the designation of the LED module on the label inside the luminaire.
- Ensure that the replacement LED module has the same light color and light output as the original module.
- Disconnect the electrical installation before proceeding.
- Open the luminaire following the provided instructions.
- Follow the installation instructions for the LED module and replace it using standard tools.
- Close the luminaire after replacing the LED module.
Spares
Item | Part Number |
---|---|
Trim ring | 20 000 100 B1 |
LED power supply unit | DEV-0348/250 |
LED module 3000 K | LED-0581/930 75 003 689 |
Reflector | LED-0581/930 75 003 689 |
DIMENSIONS
Instructions for use
Application
- Ceiling luminaire downlight · Indoor luminaire with asymmetrical light distribution.
- Luminaire is infinitely rotatable 360° around the vertical luminaire axis. The radiation angle is 130°.
Product Description
- Ceiling luminaire downlight »STUDIO LINE«
- Cast aluminum luminaire housing, finish Colour velvet black, inside hue aluminum matt
- Trim ring · Chrome finish
- Light-diffusing silicone lens
- Reflector made of pure anodized aluminum
- 2 mounting holes ø 4.5 mm
- Distance apart 36 mm
- Connecting terminals 2.5@
- Earth conductor connection
- 2-pole connection terminals for digital control LED power supply unit
- 220-240 V x 0/50-60 Hz
- DC 176-276 V
- DALI-controllable
- Number of DALI addresses: 1
- Basic insulation is provided between the mains and control cables
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
- – Safety mark
- – Conformity mark
- Weight : 0.9 kg
This product contains light sources of energy efficiency class(es) E
Safety
- The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made tothe luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 8.5 W
- Luminaire connected wattage 10 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 50 °C
50 847.2 K3
- Module designation LED-0581/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 1200 lm
- Luminaire luminous flux 884 lm
- Luminaire luminous efficiency 88,4 lm / W
Lighting technology
- Asymmetrical light distribution
- Half beam angle 24°
Installation
- LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
- Remove mounting plate from the luminaire housing.
- Unplug the earth conductor connection (plug contact).
- Lead the power connecting cable through the mounting plate.
- Fix the mounting plate with enclosed or suitable fixing material onto the mounting surface.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make an electrical connection.
- The two connecting terminals marked DA, DA are provided for digital control purposes.
- The luminaire will work with full light output if these terminals are not assigned. Establish the earth conductor connection to the luminaire housing (plug contact).
- Press the luminaire housing firmly against the mounting plate and turn it clockwise firmly against the stop.
- Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.
- To adjust the beam direction of the LED, the luminaire is now infinitely rotatable 360° around the vertical luminaire axis.
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the electrical installation.
- Open the luminaire.
- Please follow the installation instructions for the LED module.
- Close the luminaire.
Spares
- Trim ring 20 000 100 B1
- LED power supply unit DEV-0348/250
- LED module 3000 K LED-0581/930
- Reflector 75 003 689
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>