BEGA 50647.1 Wall Ceiling Light LED Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50647.1 Wall Ceiling Light LED
Instructions for use
Product description
Overvoltage protection
Installation
Cleaning · Maintenance
Replacement of the LED module
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50647.1 Wall Ceiling Light LED

BEGA-50647-1-Wall-Ceiling-Light-LED-PRODUCT

Instructions for use

The product is a luminaire made of aluminum with a white finish. It features a hand-blown crystal glass with a white interior and a screw-neck. The luminaire has a silicone gasket and a distance apart of 220 mm. It comes with a plug connection and an earth conductor connection. The luminaire is equipped with an LED power supply that operates at 220-240 V AC and 50-60 Hz, with a DC output of 170-280 V. It has a safety class I and a protection class IP 64, making it dust-tight and protected against splash water. The luminaire also has an impact strength of IK06. It weighs 2.6 kg. To ensure safety, the installation and operation of the luminaire must comply with national safety regulations. It is recommended to have a qualified electrician perform the installation and commissioning. The manufacturer is not liable for any damage caused by improper use or installation. If modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer. The electronic components in the luminaire are protected against overvoltage in accordance with DIN EN 61547. However, for additional protection against transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website. The product uses an LED lamp module with a connected wattage of 19.3 W and a luminaire-connected wattage of 22.5 W. The module has a color temperature of 3000 K and a color rendering index (CRI) of over 90. It produces a module luminous flux of 3165 lm and a luminaire luminous flux of 1427 lm, with a luminaire luminous efficiency of 63.4 lm/W. For installation, the LED module should be disassembled and the LED plug connection should be disconnected. The earth conductor connection should be disconnected as well. The power supply cable should be stripped. The luminaire should be securely mounted to the installation surface using suitable fastening materials. It is important to use the included gaskets during the installation process. The earth conductor connection should be reestablished with the plug connection. The electrical connection should be made to the plug connection. Finally, the LED plug part should be mounted onto the plug connection until it reaches the LED module. Please note that this is a general overview of the product information and usage instructions based on the provided text. It is always recommended to refer to the official user manual or contact the manufacturer for specific details and guidelines.

Application
Ceiling and wall luminaire · indoor luminaire made of aluminium and hand-blown crystal glass.
For a variety of interior lighting applications.

Product description

Luminaire made of Aluminium,
finish Colour white
Hand-blown crystal glass, white inside, with screw-neck
Silicone gasket
2 mounting holes ø 5.5 mm
Distance apart 220 mm
2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@ Connecting terminal 2.5@ with plug connection
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 170-280 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 64
Dust-tight and protection against splash water Impact strength IK06

Protection against mechanical

impacts < 1 joule
r – Safety mark
c – Conformity mark

Weight: 2.6 kg

This product contains light sources of energy efficiency class(es) D

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage
- 19.3 W
Luminaire connected wattage
- 22.5 W
Rated temperature
- ta = 25 °C
Ambient temperature
- ta max = 40 °C

50 647.1 K3

Module designation
- LED-0832/930
Colour temperature
- 3000 K
Colour rendering index
- CRI > 90
Module luminous flux
- 3165 lm
Luminaire luminous flux
- 1427 lm
Luminaire luminous efficiency
- 63,4 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Loosen hexagon socket head cap screws (4x). Disassemble LED module. Loosen LED- connection and earth connection (plug connection). Dismantle the mains supply cable. Lead mains supply cable through the cable entry into the luminaire housing. Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface. It is imperative to use the enclosed gaskets. Push silicone sleeves over the lines. Make earth conductor connection to plug connection. Push silicone sleeves over the lines and make electrical connection to plug connection. Make earth connection between LED module and luminaire housing (plug connection). Push LED plug into coupler as fa as it will go. Assemble LED module. Tighten the hexagon socket head cap screws evenly (4x). Please observe that the LED module is not damaged mechanically. Fix glass to the luminaire housing by turning it clockwise. Make sure that gasket is positioned correctly.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt. Defective glass must be replaced.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire. The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools. Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module. Inspect and, if necessary, replace the luminaire gaskets. Defective glass must be replaced. Close the luminaire.