iskydance DA-P DALI Push Dimmer Owner’s Manual

: June 12, 2024
: iskydance

Table of Contents

iskydance DA-P DALI Push Dimmer
Product Information
Product Usage Instructions
Features
Technical Parameters
Mechanical Structures and Installations
DIMENSION
Wiring Diagram
DALI address setting
Memory function setting
Push-button function
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iskydance DA-P DALI Push Dimmer

$iskydance-DA-P-DALI Push-Dimmer-FIG- $2$$

Product Information

The DALI Push Dimmer Model No.: DA-P is a small dimmer designed for use with DALI drivers or ballasts. It features unidirectional and broadcasting communication, allowing for control via conventional push-button. The dimmer has multiple functions including push dimming, address programmability, adjustable dimming speed, and memory function.

Technical Parameters:

Input voltage: 100-240VAC
Output voltage: 100-240VAC
Output current: Max 0.05A
DALI bus output: 100mA max
Operation temperature: -30°C to +55°C
Case temperature (Max.): +75°C
IP rating: IP20

Mechanical Structures and Installations:

Rotary switches for setting DALI address
Number equals to tens position plus units position
10x(0~9) for setting tens position
Dimming speed adjust

Wiring Diagram:

AC push-button input
1x(0~9) for setting units position
Memory Setting button
Memory status indicator
Package Size: L60 x W60 x H40mm
Gross weight: 0.061kg
Warranty: 5 years

Product Usage Instructions

DALI address setting:

Unicast mode: Address value 0-63 corresponds to DALI addresses 00-63.
Group mode: Address values 70-85 correspond to DALI groupings 0-15.
Broadcast mode: Left rotary switch value is 9.

PUSH dimming speed setting:

The closer the arrow is to +, the faster the PUSH dimming speed will be.
The closer the arrow is to -, the slower the PUSH dimming speed will be.

Memory function setting:

Short press the SET button to switch the memory function.

Without memory: LED indicator is red. PUSH dimming and then power on again, light returns to maximum brightness.
With memory: LED indicator is green. PUSH dimming and then power on again, light restores the last brightness. Factory default: Without memory.

Push-button function:

Short press: Turn on / off light.
Long press: Dimming up/down.

Safety & Warnings:

Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged.

Model No.: DA-P
Push Dim/Address programmability/Dim speed adjustable/Memory function

Features

Small Dimmer for DALI Drivers or Ballasts.
Unidirectional and broadcasting communication.
Control by conventional push-button, with or without memory:
- Short press: turn on /off light.
- Long press: dimming up/down.
Dimming speed adjustable by rotary knob.

Technical Parameters

Mechanical Structures and Installations

$iskydance-DA-P-DALI Push-Dimmer- FIG- $3$$

DIMENSION

Wiring Diagram

$iskydance-DA-P-DALI Push-Dimmer-FIG- $5$$

Caution:
Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged.

DALI address setting

Address value = Left rotary switch value × 10 + right rotary switch value.
For example : Left rotary switch value is 5, right rotary switch value is 4, Address value = 5 x 10 + 4 = 54.
Unicast mode : Address value 0-63 corresponds to DALI addresses 00-63.
Group mode : Address values 70-85 correspond to DALI groupings 0-15.
Broadcast mode : Left rotary switch value is 9.

PUSH dimming speed setting

The closer the arrow is to “+”, the faster the PUSH dimming speed will be.
The closer the arrow is to “-“, the slower the PUSH dimming speed will be.

Memory function setting

Short press the “SET” button to switch the memory function.

Without memory: LED indicator is red, PUSH dimming and then power on again, light returns to maximum brightness.
With memory: LED indicator is green, PUSH dimming and then power on again, light restores the last brightness.

Factory default: Without memory.