BEGA 77 162 Indoor And Outdoor Recessed Luminaire Brushed Stainless Steel Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 77 162 Indoor And Outdoor Recessed Luminaire Brushed Stainless Steel
Product Information
Product Usage Instructions
Dimensions
Application
Product Description
Safety
Installation
Maintenance
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 77 162 Indoor And Outdoor Recessed Luminaire Brushed Stainless Steel

Product Information

The product is a luminaire with electronic components that are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, it is recommended to use separate overvoltage protection components. These components can be found on the website at www.bega.com.

The product consists of different modules with varying specifications:

Module 77 162 K27: Colour temperature: 2700 K, Colour rendering index (CRI): > 80, Module luminous flux: 535 lm, Luminaire luminous flux: 68 lm, Luminaire luminous efficiency: 16.6 lm/W
Module 77 162 K3: Colour temperature: 3000 K, Colour rendering index (CRI): > 80, Module luminous flux: 550 lm, Luminaire luminous flux: 70 lm, Luminaire luminous efficiency: 17.1 lm/W
Module 77 162 K4: Colour temperature: 4000 K, Colour rendering index (CRI): > 80, Module luminous flux: 565 lm, Luminaire luminous flux: 72 lm, Luminaire luminous efficiency: 17.6 lm/W

Prior to installation, it is important to provide a proper foundation capable of accepting a maximum pressure load of 3,000 kg (~30 kN). The luminaire housing must be firmly concreted in on a firm subgrade to ensure stability. It is advised not to remove the desiccant bag from the luminaire housing as it is necessary for removing residual moisture.

Additional accessories available for this product include:

Skid-blocking glass (product code: 14000653R) with the highest rating R 13 according to DIN 51130. Suitable for use in all public areas. Abrasion resistance according to EN ISO 10545-7 Class 3.
Distribution box (product code: 70 730) with 7 cable entries for installation in soil.

Product Usage Instructions

Ensure a proper foundation capable of accepting a maximum pressure load of 3,000 kg (~30 kN) is provided. The luminaire housing must be firmly concreted in on a firm subgrade.
Do not remove the desiccant bag from the luminaire housing as it is needed to remove residual moisture.
Choose the appropriate module for your desired specifications:
- Module 77 162 K27: Suitable for colour temperature of 2700 K, Colour rendering index (CRI) > 80, Module luminous flux of 535 lm, Luminaire luminous flux of 68 lm, and Luminaire luminous efficiency of 16.6 lm/W.
- Module 77 162 K3: Suitable for colour temperature of 3000 K, Colour rendering index (CRI) > 80, Module luminous flux of 550 lm, Luminaire luminous flux of 70 lm, and Luminaire luminous efficiency of 17.1 lm/W.
- Module 77 162 K4: Suitable for colour temperature of 4000 K, Colour rendering index (CRI) > 80, Module luminous flux of 565 lm, Luminaire luminous flux of 72 lm, and Luminaire luminous efficiency of 17.6 lm/W.
Install the chosen module into the luminaire housing.
If additional overvoltage protection is desired, visit the website at www.bega.com to find suitable components.
Optional: Use the skid-blocking glass (product code: 14000653R) for increased safety in public areas.
Optional: Install the distribution box (product code: 70 730) with 7 cable entries for convenient installation in soil.

Dimensions

Application

Recessed location luminaire with low installation depth for flush-mounting installation in compacted surfaces, paths and open areas. Drive-over luminaire for vehicles with pneumatic tyres.

Please note: Luminaire must not be used for installation in road lanes, where the fixture is exposed to a horizontal strain due to braking, acceleration and change of direction. For walk-through public areas, we recommend skid-blocking glass – see accessories.

Product Description

Cover ring Luminaire housing made of stainless steel and cast stainless steel
Steel grade number 1.4301
Safety glass, white
1,8 m water-resistant connecting cable 07RN8-F 3 G 1@ with implemented water stopper and 1.2 m PVC cable conduit
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 68 10 m
Dust-tight and water pressure tight
Maximum submersion depth 10 m
Not suitable for permanent operation under water
Pressure load 3,000 kg (~30 kN)
Impact strength IK10
Protection against mechanical impacts < 20 joule
Maximum surface temperature 20 °C (measured according to EN 60598 of ta 15 °C)
– Safety mark
– Conformity mark
Weight: 4.6 kg

This product contains light sources of energy efficiency classes C

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. We recommend fuse protection via a residual current circuit breaker to be provided by the customer. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp

Module connected wattage 3 W
Luminaire connected wattage 4.1 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C
When installed in heat-insulating material ta max = 35 °C

77 162 K27

Module designation LED-0291/827
Colour temperature 2700 K
Colour rendering index CRI > 80
Module luminous flux 535 lm
Luminaire luminous flux 68 lm
Luminaire luminous efficiency 16,6 lm / W

77 162 K3

Module designation LED-0291/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 550 lm
Luminaire luminous flux 70 lm
Luminaire luminous efficiency 17,1 lm / W

77 162 K4

Module designation LED-0291/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 565 lm
Luminaire luminous flux 72 lm
Luminaire luminous efficiency 17,6 lm / W

Notice prior to installation

To accept the maximum pressure load of 3,000 kg (~30 kN) a proper foundation must be provided by the customer.
The pressure load is transferred to the foundation by this luminaire housing provided at site.
The foundation must be carried out on firm subgrade.
In order to obtain a firm stableness, the luminaire housing must be firmly concreted in.

Installation

Position luminaire housing on the foundation (as described above) and fix it with enclosed or any other suitable fixing material. The electrical connection at the luminaire connecting cable must be carried out on site according to the protection class and safety class.
We recommend to use a distribution box 70 730 or 71 053.
Note correct configuration of the mains supply cable.
The phase is connected to the brown wire (L), the neutral conductor to the blue wire (N) and earth conductor at the green-yellow ( ) wire. After finishing the ground works remove protection foil from the luminaire cover. Tighten the screws in the trim ring
evenly crosswise.
Torque = 4 Nm.

Please note

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the electrical installation.
The LED module of this luminaire may only be exchanged by the manufacturer or by one of his assigned service technicians or a comparable qualified person.
Clean dirt and deposits from key openings of screw head.
Do not use a high pressure cleaner.
Open the luminaire and clean.
Use only solvent-free cleaners.
The luminaire housing must be completely clean and absolutely dry.
Replace LED module.
Please follow the installation instructions for the LED module.
Check all screws and threads thoroughly and grease them.
Check the gasket and replace, if necessary.
A broken glass must be replaced.
Insert glass with gasket with stepped side turned upward into the luminaire housing.
Make sure that the glass is correctly positioned in the gasket bed.
Place trim ring onto glass step and tighten screws crosswise.
Torque = 4 Nm.

Maintenance

Cleaning · Maintenance

After installation, the luminaire should first be cleaned. Building dust, residues from contact adhesives, paint splashes and rust film must be completely removed.
Never use high pressure cleaners and cleaning implements made of normal steel, steel brushes or steel wool because they cause extraneous rust to form.
When using stainless steel cleaners, please read the directions carefully.
Cleaning agents containing hydrochloric acid and chlorides should never be used.
We recommend cleaning the luminaires regularly.

Accessories

14000653R Skid-blocking glass

BEGA skid-blocking glass with the highest rating R 13 according to DIN 51130 can be used without restriction for all public areas.
Abrasion resistance according to EN ISO 10545-7 Class 3

Distribution box for installation in soil

70 730: Distribution box with 7 cable entries
- Connection terminals 5 x 4
71 053: Distribution box with 10 cable entries
- Connection terminals 6 x 16

For the accessories a separate instructions for use can be provided upon request.

Spares