BEGA 33 188 Light Brick Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 33 188 Light Brick Instruction
Product Information
The product is a ceiling and wall luminaire called Lichtbausteinb. It is designed for various lighting tasks and is suitable for both interior and exterior applications. The luminaire provides a soft and uniform lighting distribution, making it ideal for places where such lighting is required. The product weighs 2.0 kg and has an IP44 protection rating. It uses an E27 socket and is made of stainless steel. The luminaire has a luminaire efficiency of 66%. Additional BEGA LED lamps are available for this luminaire. Detailed technical and lighting data for the lamps can be found in the data sheets on the manufacturer’s website.
Product Usage Instructions
- Installation:
- Lead the mains supply cable through the cable entry into the luminaire back housing.
- Fix the luminaire base with the provided or suitable fixing material onto the mounting surface.
- Ensure to use the gasket rings supplied.
- Make an earth conductor connection.
- Push silicone sleeves over the lines and make electrical connections.
- Insert lamps.
- Snap the opal glass into the lower spring clips, centralize, and push into the upper spring clips.
- Cleaning:
- Work with the power supply turned off.
- Remove the glass from the clips and detach it from the plate.
- Clean the luminaire using maintenance products that do not contain solvents.
- Do not use high-pressure cleaners during cleaning.
- Spares:
- Spare glass: LED-Leuchtmittel 3000K
- Lampholder: 11 002 446 .1 13 584 63 000 052
DIMENSIONS
Instructions for use
Application Lichtbausteinb
- Ceiling and wall luminaire for many lighting tasks.
- Ideal for places where a soft and uniform lighting distribution is required.
- For interior and exterior applications.
Product Description
- Luminaire made of aluminum alloy and stainless steel
- BEGA Unidure® coating technology
- Opal glass
- 2 mounting holes ø 5 mm
- Distance apart 434 mm
- 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
- Connecting terminals 2.5@
- Lampholder E 27
- Safety class I
- Protection class IP 44
- Protected against granular foreign bodies
- ≥ 1 mm and splash water
- Impact strength IK05
- Protection against mechanical
- impacts < 0.7 joule
- – Safety mark
- CE – Conformity mark
- Weight: 2.0 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamps
- Luminaire with screw base E 27
- Lamp output max. 2 × 75 W
- This product contains light sources of energy efficiency classes E, F
Supplied lamp
- 2 × BEGA LED lamp 13 584
- LED Retrofit 7 W · 1610 lm · 3000 K
- Luminaire efficiency: 66%
Additional BEGA LED lamps are available for this luminaire:
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
- Lead the mains supply cable through the cable entry into the luminaire back housing.
- Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
- Be sure to use the gasket rings supplied. Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection.
- Insert lamps.
- Snap the opal glass into the lower spring clips, centralise and push into the upper spring clips.
Relamping Maintenance
- Disconnect the electrical installation.
- Pull glass out of the spring clips and remove from the luminaire back housing.
- Clean the glass and luminaire housing using only suitable cleansers.
- When cleaning please do not use high pressure cleaners.
- Change the lamp.
- Snap the glass into the lower spring clips, centralise and push into the upper spring clips.
Spares
Spare glass 11 002 446 .1 LED lamp 3000K 13 584 Lampholder 63 000 052
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden ·
info@bega.com · www.bega.com