BEGA 84 564 In-Ground Luminaire Instruction Manual

BEGA 84 564 In-Ground Luminaire

Product Information

The product is a luminaire with the following specifications:

• Model Number: 84 564
• IP Rating: IP 68
• Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. For additional protection against transients, etc., separate overvoltage protection components are recommended.

Product Usage Instructions

1. Do not remove the desiccant bag from the luminaire housing as it is needed to remove residual moisture.

The product comes with different module designations and specifications. Here are the details for each module:

Module K27

• Colour Temperature: 2700 K
• Colour Rendering Index (CRI): > 80
• Module Luminous Flux: 620 lm
• Luminaire Luminous Flux: 442 lm
• Luminaire Luminous Efficiency: 88.4 lm / W

Module R K27

• Colour Temperature: 2700 K
• Colour Rendering Index (CRI): > 80
• Module Luminous Flux: 620 lm
• Luminaire Luminous Flux: 382 lm
• Luminaire Luminous Efficiency: 76.4 lm / W

Module K3

• Colour Temperature: 3000 K
• Colour Rendering Index (CRI): > 80
• Module Luminous Flux: 645 lm
• Luminaire Luminous Flux: 460 lm
• Luminaire Luminous Efficiency: 92 lm / W

Module R K3

• Colour Temperature: 3000 K
• Colour Rendering Index (CRI): > 80
• Module Luminous Flux: 645 lm
• Luminaire Luminous Flux: 397 lm
• Luminaire Luminous Efficiency: 79.4 lm / W

DIMENSIONS

Instructions for use

Application
Floodlight with symmetrical wide beam light distribution.
For embedding in gravel, lawns, flower beds, or in compacted, non-inflammable surfaces. Drive-over luminaire for vehicles with pneumatic tyres.

Please note:
Luminaire must not be used for installation in road lanes, where the fixture is exposed to a horizontal strain due to braking, acceleration and change of direction.
For walk-through public areas, we recommend skid-blocking glass – see accessories.

Product Description

• Luminaire made of stainless steel
• Steel grade no. 1.4301
• Clear safety glass
• Reflector surface made of pure aluminium Optical silicone lens · BEGA Hybrid Optics® 1,8 m water-resistant connecting cable H07RN8-F 3 G 1,5@ with implemented water stopper and 1.2 m PVC cable conduit
• BEGA Ultimate Driver®
• LED power supply unit
• 220-240 V x 0/50-60 Hz
• DC 176-264 V
• BEGA Thermal Switch®
• Temporary thermal shutdown to protect temperature-sensitive components
• Safety class I
• Protection class IP 68 10 m
• Dust-tight and water pressure tight
• Maximum submersion depth 10 m
• Not suitable for permanent operation under water
• Pressure load 2,000 kg (~20 kN)
• Impact strength IK10
• Protection against mechanical
• impacts < 20 joule
• Maximum surface temperature 25 °C
• (measured according to EN 60598 of ta 15 °C)
• – Safety mark
•  CE – Conformity mark
• Weight: 1.6 kg
• This product contains light sources of energy efficiency classes C, D

Safety

• The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
• We recommend fuse protection via a residual current circuit breaker to be provided by the customer.
• The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

Installation

• Luminaire for recessed mounting in gravel, lawns and flower beds.
• The recessed depth must be arranged such that the trim ring is above ground level.
• When installed in compacted surfaces make sure that the housing is firmly fixed and that the trim ring is not directly resting on the pavement or other surfaces (Fig. A). For this purpose installation housing 70 693 can be practical (Fig. B).
• The electrical connection must be carried out with matching protection class and safety class with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable.
• We recommend to use a BEGA distribution box 70 730 or 71 053.
• To protect the luminaire power supply cable against mechanical damage, push the included installation pipe over the cable.
• Note correct configuration of the mains supply cable. Make mains supply connection at the brown (L), blue (N) and green-yellow lead (1). Tighten the screws in the trim ring evenly crosswise.
• Torque = 3.5 Nm.

Please note:

• Do not remove the desiccant bag from the luminaire housing.
• It is needed to remove residual moisture.

Lamp

• Module connected wattage 3.9 W
• Luminaire connected wattage 5 W
• Rated temperature ta = 25 °C
• Ambient temperature ta max = 40 °C
• When installed in heat-insulating
• material ta max = 25 °C

84 564 K27

• Module designation LED-1029/827
• Colour temperature 2700 K
• Colour rendering index CRI > 80
• Module luminous flux 620 lm
• Luminaire luminous flux 442 lm
• Luminaire luminous efficiency 88,4 lm / W

84 564 R K27

• Module designation LED-1029/827
• Colour temperature 2700 K
• Colour rendering index CRI > 80
• Module luminous flux 620 lm
• Luminaire luminous flux 382 lm
• Luminaire luminous efficiency 76,4 lm / W

84 564 K3

• Module designation LED-1029/830
• Colour temperature 3000 K
• Colour rendering index CRI > 80
• Module luminous flux 645 lm
• Luminaire luminous flux 460 lm
• Luminaire luminous efficiency 92 lm / W

84 564 R K3

• Module designation LED-1029/830
• Colour temperature 3000 K
• Colour rendering index CRI > 80
• Module luminous flux 645 lm
• Luminaire luminous flux 397 lm
• Luminaire luminous efficiency 79,4 lm / W

84 564 K4

• Module designation LED-1029/840
• Colour temperature 4000 K
• Colour rendering index CRI > 80
• Module luminous flux 685 lm
• Luminaire luminous flux 489 lm
• Luminaire luminous efficiency 97,8 lm / W

84 564 R K4

• Module designation LED-1029/840
• Colour temperature 4000 K
• Colour rendering index CRI > 80
• Module luminous flux 685 lm
• Luminaire luminous flux 421 lm
• Luminaire luminous efficiency 84,2 lm / W

Lighting technology
Half beam angle 30°

Cleaning · Maintenance

After installation, the luminaire should first be cleaned. Building dust, residues from contact adhesives, paint splashes and rust film must be completely removed. Never use high pressure cleaners and cleaning implements made
of normal steel, steel brushes or steel wool because they cause extraneous rust to form. When using stainless steel cleaners, please read the directions carefully. Cleaning agents containing hydrochloric acid and chlorides should never be used. We recommend cleaning the luminaires regularly.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
• Disconnect the electrical installation.
• LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during relamping.
• Clean dirt and deposits from key openings  of screw head. Do not use a high pressure cleaner. Open the luminaire and clean.
• Use only solvent-free cleaners.
• The luminaire housing must be completely clean and absolutely dry.
• Please follow the installation instructions for the LED module.
• Check all screws and threads thoroughly and grease them.
• Check the gasket and replace, if necessary. A broken glass must be replaced.
• Insert glass with gasket – with stepped side turned upward and the groove structure of the gasket turned downward – into the luminaire housing. Make sure that the glass is correctly positioned in the gasket bed.
• Place trim ring onto glass step and tighten screws crosswise.
• Torque = 3.5 Nm.

Accessories

14000214R Skid-blocking glass
BEGA skid-blocking glass with the highest rating R 13 according to DIN 51130 can be used without restriction for all public areas. Abrasion resistance according to
EN ISO 10545-7 Class 3

• 70 693 Installation housing
  Distribution box for installation in soil

• 70 730 Distribution box with 7 cable entries
  Connection terminals 5 x 4@

• 71 053 Distribution box with 10 cable entries
  Connection terminals 6 x 16@

For the accessories a separate instructions for use can be provided upon request.

Spares
Spare glass skid blocking 14 000 214 R
Spare glass 14 001 520
LED power supply unit DEV-0303/350
LED module 2700 K LED-1029/827
LED module 3000 K LED-1029/830
LED module 4000 K LED-1029/840
Reflector 76 001 881
Gasket glass 83 002 033
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>