CRYSTORAMA 3025-EB-CL-MWP Butler 5 Light Crystal Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 3025-EB-CL-MWP Butler 5 Light Crystal Chandelier
Product Information
This product is a lighting fixture model number 3025-EB-CL-MWP manufactured by Crystorama. It has a dry rating and is designed for indoor use. The fixture requires 5 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. LED bulbs are recommended for extended use.
The fixture comes with various parts including top and bottom bobeche, scroll, glass column kit, mounting bar, chain, canopy, collar ring, collar loop, candle sleeves, bottom dish, finial, and crystal sets.
It is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
This product contains lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.p65warnings.ca.gov.
Product Usage Instructions
- Before installation, place the fixture parts on a soft cloth-covered platform.
- Feed the wire through the scroll and glass column kit. Turn the fixture loop to tighten the scroll onto the frame.
- Place the bottom bobeche and dish over the bottom cover and secure with the finial.
- Attach the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and make the wire connection. Attach the canopy over the mounting bar and secure with the collar ring.
- Slide the bobeche and candle sleeve over the socket.
- Dress the crystal as illustrated in the manual.
ASSEMBLY INSTRUCTION MODEL # 3025-EB-CL-MWP
Electrical Danger Turn Power Off
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes
You will need 5- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated.
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation
of fixture.
- Feed the wire through the scroll and glass column kit. Turn the fixture loop to tighten the scroll onto the frame.
- Place the bottom bobeche and dish over the bottom cover and secure with finial.
- Attach the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.
- Slide the bobeche and candle sleeve over the socket.
- Dress the crystal as illustrated.
DETAILED ILLUSTRATION 
Crystal Sets
- A. 30 Sets. (1)14mm + AS9-1.5″
- B. (1) 14mm + AS9-2″
- C. 20 Sets. (2)14mm + AS9-2″
- D.(1) 14mm + AS9-2″
- E. 1 Piece. (4)14mm + AS8-40mm Ball
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
PART NUMBER MODEL# 3025-EB-CL-MWP
Part Numbers
-
A. (2)-Wire Connector
-
B. (1)-Mounting Bar
-
C. (2)-Mounting screw
-
D. (1)-Lock washer
-
E. (1)-Hex nut
-
F. (1)-Nipple
-
G. (1)-Canopy (W5″xH1″)-XSN3025EBCAN5IN
-
H. (1)-Collar ring
-
I. (1)-Collar loop
-
J. (1)-Chain (4mmx72″)
-
K. (1)-Fixture loop
-
L. (1)-Glass Column Kit
Top bobeche;Ø4″,5pin,28mm hole-XSN3022EBBOB5PN Glass vase;H6 3/4″,Ø3 1/4″.M. (5)-Scroll-XSN3025EBSCROLL -
N. (5)-Bobeche ; Ø4″,5pin,28mm hole – XSN3022EBBOB5PN
-
O. (5)-Candle sleeve ; H4″-XSN3025CDL4IN
-
P. (5)-Arms
-
Q. (1)-Bottom bobeche ; Ø5″,5pin,13mm hole – XSN3025EBBOB5PN
-
R. (1)-Bottom dish
-
S. (1)-Finial-XSN3025EBFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>