CRYSTORAMA ARC-1919-SA-CL-MWP Arcadia 15-Light Antique Silver Chandelier Instruction Manual

CRYSTORAMA ARC-1919-SA-CL-MWP Arcadia 15-Light Antique Silver Chandelier

ASSEMBLY INSTRUCTIONS

**All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes

You will need 15 Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE( This fixture is Dry rated)
**

How to Install

1. Please place the fixture parts on a soft-cloth covered platform before installation. Do not remove the packaging on the arms until after installation is completed.
2. Assemble the Top and Bottom arms on the top distributor box. When assembling top arms, please use the thicker nut. Use the thin nut for the bottom arms only
3. For the hot socket wires, connect 5pcs of socket wires and 1 pc of lead wire together and cap them with wire nuts. Repeat this step for the rest of the socket wires. Connect the 5pcs of lead wire with the hot fixture wire and cap them with a wire nut.
4. Follow step #3 for connecting the neutral socket wires.
5. Carefully push all wires and wire nuts into distributor box. Place the top cover over the top distributor box and secure with the nut. Screw the stem onto the cover and loop onto the stem.
6. Insert a scroll onto the top of each arm and secure using the provided screw and wrench.
7. Attach one end of the chain to the fixture loop by opening the quick link. Slide the screw collar ring over the upper end of the chain and through the canopy. Open the opposite quick link and lift the fixture to attach the screw collar loop to the quick link. Secure the link.
8. Feed the fixture wires and ground wires through the chain and screw collar loop, exiting through the stem.
9. Fasten mounting hardware to junction box with machine screws. After wires are connected, thread the screw collar loop onto the nipple. Place the canopy up against the ceiling and lock by tightening the screw collar loop ring.
10. After safely attaching the fixture into junction box ,install
11. When you begin to dress the fixture, start with package labeled (A).
12. IMPORTANT: Apply crystal sets in alphabetical order.

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go towww.P65Warnings.ca.gov

Crystal Sets

A. 8sets 2 14mm
B. 8sets 2 14mm + 1 76mm drop
C. 5sets 3814mm
D. 5sets 2714mm
E. 10sets 5914mm
F. 1 0sets 29 14mm
G. 1 set 3014mm+ 1 76mm drop
H. 1 set 3214mm+ 1 76mm drop
I. 1 set 3414mm+ 1 76mm drop
J. 1 set 3614mm+ 1 76mm drop
K. 1set 3814mm+176mm drop
L. 1 set 4014mm+ 1 76mm drop
M. 1 set 4214mm+ 1 76mm drop
N. 1set 4414mm+176mm drop
0. 1 set 4614mm+ 1 *76mm drop

PART NUMBER

A. (1 )-Mounting Hardware
B. (1 )-Canopy;05H1 ” (XBN1917SACAN51N)
C. (1 )-Screw Collar Loop Ring
D. (1 )-Screw Collar Loop
E. (1 )-Chain;01/572″ (XBN1917SACHA5MM)
F. (1)-Fixture Loop;02″
G. (1)-Top Stem;L6″
H. (12)-Candle Sleeve;L2 4/5″ (XBN1919SACDL2.8IN)
I. (1)-Finial;H11/5″ (XBN1917SAFIN)
J. (5)-Top arm
K. (10)-Bottom arm
L. (15)-Scroll

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>