LIVINGTON M34586 MultiScrubber Electric Scrubber Instruction Manual

: June 13, 2024
: LIVINGTON

Table of Contents

LIVINGTON M34586 MultiScrubber Electric Scrubber
Product Information
Product Usage Instructions
Scope of delivery
IMPORTANT INFORMATION & SAFETY INSTRUCTIONS
ASSEMBLY
TROUBLESHOOTING
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LIVINGTON M34586 MultiScrubber Electric Scrubber

LIVINGTON-M34586-MultiScrubber-Electric-Scrubber-
PRODUCT

Product Information

The Livington Multi Scrubber is a versatile cleaning tool designed for cleaning floors and other hard surfaces such as tiles, parquet, and stone. It is intended for domestic use and is not suitable for commercial or industrial purposes. The device comes with various components, including a charger, motor unit, nylon pad, pad adapter, cloth pad, motor unit frame, clamps, telescopic pole with handle, on/off switch, indicator lights, attachment plate support, magnets, and a charging socket.

Product Usage Instructions

Before using the device, ensure that all components are included in the package and check for any damage during transit. If any damage is found, refrain from using the product and contact customer service immediately.
Remove any transport protection devices and stickers from the device. Do not remove type shields or warning labels.
Charge the battery by removing the silicone cover from the charging socket (13) on the motor unit (2).
If the indicator light does not turn on when the motor unit is connected to the power supply, check if the battery is weak, if the adapter is properly connected to the motor unit and the socket, if the socket is defective, or if there is no power supply to the socket. Charge the battery if necessary.
Before using the device, remove coarse dirt from the floors and surfaces that you intend to clean.

Scope of delivery

Scope of delivery and description of the parts #1: $LIVINGTON-M34586 -MultiScrubber-Electric-Scrubber-fig- $1$$

Charger
Livington Multi Scrubber / motor unit
Nylon pad
Pad adapter (attachment plate)
Cloth pad
Motor unit frame
Clamps
Telescopic pole with handle
On/Off switch
Indicator lights
Attachment plate support
Magnets
Charging socket

IMPORTANT INFORMATION & SAFETY INSTRUCTIONS

Warning : Basic precautions should always be followed when using any electrical appliance to reduce the risk of fire, electric shock and personal injury. These include the following measures:

Before using the device for the first time, read the entire operating manual thoroughly, and retain it for future reference. Do not attempt to operate the product until you have read the operating instructions and fully understood them.
This product is not a toy. If the appliance is used by or in the vicinity of children, they must be continuously supervised.
Use only the charger supplied by the manufacturer.
Do not charge or store the device outdoors.
This device should only be used by children aged 8 years and over, as well as by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they are supervised or have been instructed on the safe use of the device and understand the dangers associated with its use. Children must never be allowed to play with the device. Cleaning and user maintenance must never be performed by children unless they are aged 8 years or over and supervised by an adult. Children younger than 8 years of age are to be kept away from the device and the connection cable.
Before assembling, dismantling or cleaning, and when
not in use, the device should always be switched off and disconnected from the power supply.
Never immerse the device or the charging adapter in water or other liquids, and ensure that they do not fall into water or get wet.
Do not attempt to dismantle the device. Do not attempt to make adaptations to the device!
Always handle the cable with care. When moving the charger, do not carry or drag it using the cable. When disconnecting from the socket, grasp the plug and pull on it. Keep the charging cable away from heat and sharp edges.
Do not use the device in environments where explosive or flammable gases and liquids are present.
If unusual noises, smells, smoke or faults occur during operation, switch the device off immediately, and remove the plug from the socket.
Make sure that the device is switched off before changing accessories or charging the device.
Do not charge the battery when the ambient temperature is below 5°C or above 40°C.
Ensure that hair, loose clothing and body parts are kept away from moving parts.

PURPOSE OF USE

This device is suitable for cleaning floors and other hard surfaces such as tiles, parquet, stone, etc.
The device is intended for domestic use, and is not for commercial or industrial purposes.
Use the device only as described in the operating instructions. Any other type of use is to be considered improper use.

BEFORE FIRST USE
Important : Check that the package contains all components and ascertain whether they have been damaged in transit. In the event of damage, you should refrain from using the product, and contact customer service immediately.

Before using the device, remove all transport protection devices and stickers, etc. Never remove type shields or warning labels!
Charge the battery (see “Charging the battery”).
Remove coarse dirt from the floors and surfaces that you intend to clean.

CHARGING THE BATTERY $LIVINGTON-M34586-MultiScrubber-Electric-Scrubber-fig- $2$$

Risk of short-circuit! Do not insert any electrically conductive objects (e.g. screwdrivers) into the charging socket.
Unplug the adapter from the socket when the device is not charging.
The battery must be fully charged before it is switched on for the first time, in order for the maximum charge capacity to be achieved.
DO NOT charge continuously for more than 12 hours. This could shorten the battery life.

INFO : It will take around 8 to 10 hours to charge the battery before first use.

Remove the silicone cover from the charging socket (13) on the motor unit (2).
Plug the adapter into the charging socket.
Plug the adapter into a functioning and easily accessible mains socket. The indicator light (10) will light up red.
The indicator light flashes red while charging. After 5 hours of charging, the indicator lamp lights up red (NO longer flashes) – this indicates, that the charging process has finished.
First disconnect the adapter from the mains, and then from the device.
Place the silicone cover back into the charging socket.

ASSEMBLY

The motor unit of the Livington Multi Scrubber (2) can be used as both a hand- held device and in combination with the telescopic pole and frame for the motor unit (6+8).
Attaching/removing the telescopic pole with handle (#2a +#2b): Take the telescopic pole provided and insert it into the frame of the motor unit (6). Pay attention to the 2 side openings at the thinner end of the telescopic pole. Allow it to audibly engage with the motor unit. To release this connection, firmly press the two external push buttons and pull on the ends.
You can then attach the handle to the telescopic pole. To do this, insert the wider end of the telescopic pole into the handle, and rotate it so that the pin meets the hole in the telescopic pole. To remove
the detachable handle, press down on the pin and pull it out of the telescopic pole.

Attaching the motor unit:

Place the motor unit in the frame (6). The safety lock must audibly click into place on both the left and right sides. Make sure that it is securely attached.
To remove the motor unit, push the safety latch outward. This will release the motor unit and allow it to be removed.

Attaching/removing the pad adapter and pads:
The correct structure can be found in #3 – from top to bottom:

Motor unit (2)
Pad adapter/attachment plate (4)
Pad (nylon pad or microfibre pad – 3 or 5)

IMPORTANT INFO : THE PAD ADAPTER AND THE MICROFIBRE CLOTH ARE ALREADY ATTACHED TO THE MOTOR UNIT AT DELIVERY! Of course, you can separate the motor unit from the pad adapter and then disconnect this from the pads, and put them back together again

6 magnets (12) are attached to the underside of the motor unit (2). The pad adapter (4) must be attached to these magnets. Attach the pad adapter to the motor unit. Make sure that the arrows on the motor unit and the pad adapter are aligned and point towards each other. The side with the Velcro fastener faces outwards.
To remove the pad adapter from the motor unit, all you need to do is pull on it.

Attaching/removing the cloths:
Select the desired cloth and attach it to the pad adapter using the Velcro fastener. To remove the cloth, hold the pad adapter and gently and slowly pull on the cloth.

Attaching/removing the optional accessories

( ATTENTION : NOT INCLUDED IN DELIVERY CONTENTS)
The brushes do not require an adapter and can simply be attached directly to the device using the magnets, and removed in the same way. Suitable accessories for your Livington Multi Scrubber can be purchased at www.mediashop.tv or by calling 0800 900 88 90 (free of charge from DE, AT + CH).
USE | Do not use the device unless it has been fully and properly assembled. Switch off the device before attaching or removing any accessories. Do not use the device while it is connected to the charging adapter or mains socket. Switch off the device after each cleaning process to maximize the operating time per battery charge.

Attaching the required accessories to the motor unit
Press the on/off switch (9) on the motor unit to switch on the device. The holder for the accessory mounting plates (11) and the attached pads/attachments then begins to vibrate. Move the device over the surface to be cleaned.
Press the on/off switch again to switch off the device.
Clean the device and accessories after each use.

NOTE : Don’t exert too much pressure on the device – allow the device to do the work for you.
TIP : For stubborn dirt, you can also use a mild cleaning agent (which is suitable for the surface that is to be cleaned). To do this, either spray the cleaning agent directly onto the surface to be cleaned or moisten the selected cloth of your device with it to increase the cleaning effect.

CLEANING AND STORAGE

Always make sure the device is turned off before cleaning.
Make sure that no liquids enter the motor unit when cleaning the device.
Never use caustic or abrasive cleaning agents. These can damage the surfaces.
The cloths can discolour over time. This is entirely normal, and does not affect functionality in any way. If a cloth is damaged or worn, it should be replaced.
If necessary, clean the motor unit (2), the telescopic pole and frame (6+8) and the accessory pads with a damp, soft cloth. Dry with a soft cloth.
When washing the pads (5), pay attention to their washing labels. Do not use any fabric softener.
Simply shake the nylon pads (3) clean when you use them dry. If you use them for wet cleaning, simply wash them with warm water.

TROUBLESHOOTING

If the device is not working properly, first see if you can fix the problem yourself. If you cannot solve the problem by following the steps below, please contact customer support.

Technical data

Power supply
- Ni-MH Battey:3,6V⎓800mAh
- Power: 10W (max)
Battery
- Charge time: approx. 5 hrs
- Operating time: approx. 40 mins (when the battery is fully charged)
- Adapter model number: TYGSDC0600200
- Input: 100 – 240 V ~ 50/60 Hz, 0.25 A
- Output: 6V DC, 200mA

Made in China
For indoor use only
This product complies with the European directives
Protection rating
Nylon Cleaning-Pad: 100% Nylon

DISPOSAL

This symbol means that such electrical equipment or batteries must not be disposed of with normal household waste. You are legally obliged to hand in such items – free of charge – to a public collection point or distributor- created collection point for the recycling of electrical devices and expired bulbs and batteries within the scope of the Electrical and Electronic Equipment Act that are not encapsulated by or fixed into the appliance, and can be removed or separated from the appliance non-destructively, for disposal at the end of their service life. Use rechargeable batteries instead of single-use batteries wherever possible. The recovery and recycling of old appliances makes an important contribution to protecting our environment. Improper disposal can result in toxic substances being released into the environment, which can have harmful effects upon people, animals and plants. Batteries with an increased pollutant content are also marked with the following symbols: Cd = cadmium, Hg = mercury, Pb = lead. Consumers are themselves responsible for deleting any personal data from appliances

OPTIONAL ACCESSORIES

(not included)
Suitable accessories for your Livington Multi Scrubber can be purchased at www.mediashop.tv or on 0800 900 88 90 (free of charge from DE, AT + CH).

“Pad-Set”