CRYSTORAMA COL-101-CH Colton 1-Light Polished Chrome Wall Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA COL-101-CH Colton 1-Light Polished Chrome Wall Mount
Product Information
The product is a wall fixture with model number COL-101-CH. It can be mounted either upwards or downwards and is damp-rated. The fixture requires 1 medium base bulb with a recommended wattage of 60 watts and a maximum wattage of 60 watts. LED bulbs are recommended for extended use. The product comes with a glass shade, socket ring, and socket. It is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Additionally, the product can expose you to lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Turn off the power to the outlet box before installation.
- Use two outlet box screws to install the mounting plate onto the outlet box.
- Attach the backplate over the mounting plate and secure it with screws.
- Place the glass shade over the socket and secure it with the socket ring.
- Install a medium base bulb with a recommended wattage of 60 watts and a maximum wattage of 60 watts. LED bulbs are recommended for extended use.
- Turn on the power to the outlet box and test the fixture to ensure it is working properly.
It is important to follow these instructions carefully and to have all electrical components installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
ASSEMBLY INSTRUCTION
The fixture can be mounted either upwards or downwards.
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. You will need 1 -Medium Base Bulb 60 Watts recommended 60Watts Max. USE LED BULBS FOR EXTENDED USE.The fixture is Damp rated.
How to Install
- Install the mounting plate onto the outlet box using two outlet box screws.
- Attach the backplate over the mounting plate and secure it with the screws.
- Place the glass shade over the socket and secure it with a socket ring.
DETAILED ILLUSTRATION
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65warnings.ca.gov.
Part Number
- A. (2)- Wire Connector
- B. (1)- Mounting plate
- C. (2)- Screw
- D. (1)- Backplate (Ø5.5″)
- XSN101CHBK5.5IN
- E . (1)- Socket Ring
- F. (1)- Glass Shade;W5″,H7.5″
- XSN101SHA
- G. (1)- Socket
