CRYSTORAMA 9597-LG Hulton Hanging Pendant Lighting Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
9597-LG Holton Hanging Pendant Lighting
Instruction Manual
ASSEMBLY INSTRUCTION
MODEL 449597-LG
9597-LG Holton Hanging Pendant Lighting
All electrical components must be installed by a licensed electrician in
accordance with the Notional
Electric Code and the appropriate local electrical codes.
You will need 6 – Cand.Bulb 40 Watts Recommended 60 Watts Mix USE LED BULBS
FOR EXTENDED USE
This fixture is dry rotted
How to Install
- Place the frame on a soft cloth covered table before installation.
- Screw the loop onto the top of frame.
- Attach the support bar onto the inner cage using M6 screws. Tighten the screws using a screwdriver.
- Align the hole on support bar on inner cage with the hole on the top of outer cage. Secure with 8–32 screws.
- Attach the shade onto the frame using a nut.
- Attach the fixture to the chain using the top loop then mount the canopy to the ceiling.
WARNING: This product con expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wornings.co.gov
Part Number
Part Numbers
A. (1)—Mounting Hardware
B. (1)—Canopy, W7 “XH0.75″; XSU9595LGCAN7IN
C. (1)—Chain; 72″; 4.0mm; XSU9595LGCHA4MM
D. (1)—Top Loop
E. (1)—Nipple
F. (1)—Stem(XSU9597LGSTEM2IN)
G. (1)—Inner Cage
H. (3)—Nut
I. (1)—Outer Cage
J. (6)—Candle Sleeve; $0.75″X1.75″; XSU9595LGCDL1.75IN
K. (6)—Socket
L. (1)—Shade; .9.75″X19.25″; XSU9597LGSHA19.25IN
M. (3)—Support bar
N. (3)-8/32” Screw
0. (3)—M6 Screw 