CRYSTORAMA 2245-BF Libby Langdon Chandelier Instruction Manual

CRYSTORAMA 2245-BF Libby Langdon Chandelier

Product Information

CRYST RAMA MODEL#2245-BF

CRYST RAMA is a lighting fixture brand that has been providing quality lighting solutions for 60 years. The model#2245-BF is a dry rated fixture that requires the installation of 4 Candelabra Base Bulbs. It is recommended to use 40 Watts bulbs and the maximum capacity is 60 Watts. For extended use, LED bulbs are suggested. This fixture contains electrical components that must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

The product dimensions are as follows:

• Fabric Shade: 5-1/2” x 16” x 4-1/2”
• Light Cluster Bottom Finials: 6” 3/4”
• Iron Tubes Candle Sleeve: 4”
• Center Rod: 95”

This product contains Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Usage Instructions

1. Place the threaded end of a iron tube into a hole on the bottom square ring. Secure with a finial. Repeat this for the other iron tubes.
2. Remove the long screw from each of the iron tubes. Align the holes on the top square ring with the holes that the long screws were removed from. Tighten each screw into the holes to secure the top square ring and the (4) iron tubes together. Make sure that the iron tubes are assembled straight relative to the top and bottom ring before tightening the top screws and the bottom finials.
3. Slip the center rod along wire and thread into the coupling located on the top of the light cluster.
4. Slip the arm assembly along wire and thread into the center rod.
5. Spread the arms so that the arms are at equal distance from each other.
6. Remove the short screw from each of the holes on the top square ring. Align the holes on the tabs of the arm assembly with the holes on the top square ring and secure together using the short screws that were removed.
7. Slip the loop along wire and thread onto the nipple of arm assembly.
8. Install the fabric shade onto the candle sleeve.
9. Install the bulbs(not included) into the socket.

Note: It is important to follow these instructions carefully to ensure safe and proper installation of your CRYST RAMA MODEL#2245-BF lighting fixture.

WARNING

• Electrical Danger
• Turn Power off

All electrical components must be installed by a licensed electrician in accordance with the National All electrical components must be Electric Code and the appropriate local electrical codes.

• You will need 4- Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
• USE LED BULBS FOR EXTENDED USE This fixture is Dry rated.

How to install

1. Place the threaded end of a iron tube into a hole on the bottom square ring. Secure with a finial. Repeat this for the other iron tubes.
2. Remove the long screw from each of the iron tubes. Align the holes on the top square ring with the holes that the long screws were removed from. Tighten each screw into the holes to secure the top square ring and the (4) iron tubes together. Make sure that the iron tubes are assembled straight relative to the top and bottom ring before tightening the top screws and the bottom finials.
3. Slip the center rod along wire and thread into the coupling located on the top of the light cluster.
4. Slip the arm assembly along wire and thread into the center rod.
5. Spread the arms so that the arms are at equal distance from each other.
6. Remove the short screw from each of the holes on the top square ring. Align the holes on the tabs of the arm assembly with the holes on the top square ring and secure together using the short screws that were removed.
7. Slip the loop along wire and thread onto the nipple of arm assembly.
8. Install the fabric shade onto the candle sleeve.
9. Install the bulbs(not included) into the socket.

Dimensions

Part Number

• A. (1)-Mounting hardware
• B. (1)-Canopy W6″xW6″xH3/4″ #XRF2240BFCAN6IN
• C. (1)-Collar ring
• D. (1)-Collar loop
• E. (1)-Chain -72″, 4mm thick #XRF2240BFCHA4.0MM
• F. (1)-Loop #XRF2240BFLOOP
• G. (1)-Pipe D1/2″x4-3/8″
• H. (8)-Short screw
• I. (4)-Long screw
• J. (1)-Top square ring W13-5/8″xW13-5/8″xH1/2′ #XRF2245BFTOPRING
• K. (4)-Iron tube L12-3/4″×H1/2′ #XRF2245BFIRT
• L. (1)-Bottom square ring W15-3/4 XW15-3/4 XH1/2″ #XRF2245BFBOTRING
• M. (4)-Bottom finial #XRF2243BFFIN
• N. (4)-Fabric shade W4-1/2″xH5-1/2′ #XRF2245BFSHA5.5IN
• O(A). (4)-Candle sleeve-BF W7/8″xL3-3/8″ #XRF2241BFCDL3.3IN
• O(B). (4)-Candle sleeve-WH W7/8″xL3-3/8′ #XRF2241WHCDL3.3IN

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>