PROSCAN PEB700 TWS Stereo Bluetooth Earbuds with Acrylic Case and Digital Display User Guide

PROSCAN PEB700 TWS Stereo Bluetooth Earbuds with Acrylic Case and Digital

Display

OVERVIEW

1. Earphone LED indicator
2. Microphone hole
3. Type C port
4. Digital power display
5. Acrylic case
6. Touch control position
7. Earphone Charging contact

Specifications

• Bluetooth: V5.3 JL 6983 D4
• Wireless frequency: 2.402GHz – 2.480GHz
• Transmission distance: ≥10M
• Headphone battery: 30MAH
• Rechargeable battery: 250MAH with protection board.
• Continuous listening time: around 4 hours ( 70% volume and headset is full). Headset could be full charged for three times when Charging case is full.
• Support Bluetooth Profile: A2DP,AVCTP, AVDTP, AVRCP,HFP, SPP

OPERATION

1. Take out the headset from the charging compartment and start the headset automatically
2. The headset power on when took outside from the charing case.
3. When the device is powered on, put the headset in to the charging compartment, and the headset will automatically shut down
4. In the boot state, long press the touch position for 5 seconds to power off the headset
5. After the headset is powered on, the left and right headphones are close to each other, and the left and right headphones are automatically paired
6. After the left and right earphones are paired successfully, turn on the mobile phone Bluetooth to search for Pro PBE700 and connect to it
7. For single ear connection, power on the single headset, and connect the Bluetooth of the mobile phone to Pro PBE700 successfully
8. When the headset is connected to the mobile phone successfully and music is playing, click any touching position of the headset to pause the music and click again to play the music
9. In the previous song, when the music is playing, three strikes the L touch position. In the next song, when the music is playing, three strikes the R touch position
10. Siri awake, after the headset is connected to the phone, double-click either side to touch the location
11. Volume increase: After the headset is successfully connected to the mobile phone, long press the touch position of L for 1.5 seconds to increase the volume by one level. The volume decreases.After the headset is successfully connected to the mobile phone, long press the touch position of R for 1.5 seconds and the volume decreases one level
12. Answer or hang up a call. When a call comes in, click either side to touch the location once
13. To reject a call, press 1 second for an incoming call.

LED indicator

• Power on: both earphones flash green lights Power off: both earphone green lights turn off.
• Earphone Pairing: When the two headphones are paired successfully, the headphone light of one headset goes off.

When the phone is connected with phone successfully, and the other light goes off.

Charging

• Put your earphone into charging base and make sure the earphone be well connected with the charging port to get your earphones to be charged.
• When your charging base battery low, insert the type C cable this device must accept any interference received, including interference that may cause undesired operation.
• we provided into earphone type C port, and connect it with a safe adapter or USB output for charging your TWS earphone and earphone base.
• When charging for the earphone, the green light will turn on and stay. When earphone is full and the green light will go off.
• When charging for the charging case, the single digit of the power display will flash. When it`s full, the number becomes 100 and no flash and remain on.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the Limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This, device complies with Part 15 of the FCC Rules. Operation is bject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

To make a warranty claim.

Please email support@curtiscs.com or call 1-800-968-9853.

90-day Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase, is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V-60Hz). We exclude all claims for special, incidental, and consequential damages caused by a breach of express or implied warranty. All liability is limited to the amount of the purchase price.

Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

For faster service, locate the model, type, and serial numbers on your appliance

ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you contact the Support Team

• Name, address and telephone number.
• The model number and serial number.
• A clear, detailed description of the problem.
• Proof of purchase including dealer or retailer name, address, and date of purchase.

References

• Proscan, innovation useful for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>