CRYSTORAMA PAY-921-CH Payton 1 Light Polished Chrome Wall Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA PAY-921-CH Payton 1 Light Polished Chrome Wall Mount
Product Information
The model #PAY-921-CH is a lighting fixture that has been lighting the way for sixty years. The fixture is damp rated and requires 1-Candelabra Base Bulb with a recommended wattage of 40Watts and a maximum wattage of 60 Watts. It is recommended to use LED bulbs for extended use. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
Product Usage Instructions
- Before starting, turn off the power to the outlet box to avoid electrical danger.
- Install the mounting plate onto the outlet box using two outlet box screws.
- Attach the backplate onto the mounting plate and secure it with screws.
- Slide the candle sleeve over the socket.
- Slide the shade over the candle sleeve.
- Install a Candelabra Base Bulb with a recommended wattage of 40Watts and a maximum wattage of 60 Watts. It is recommended to use LED bulbs for extended use.
- Turn on the power and enjoy your newly installed lighting fixture!
Note: Please refer to the part numbers G, A, E, F, B, and CD for any replacement parts needed.
WARNING:
-
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
-
You will need 1-Candelabra Base Bulb 40Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is damp rated
How to Install
- Install the mounting plate onto the outlet box using two outlet box screws
- Attach the backplate onto the mounting plate and secure with screws.
- Slide the candle sleeve over the socket.Slide the shade over the candle sleeve.
WARNING:
This product can expose you to lead which is known to the State of California
to cause cancer and or birth defects or reproductive harm For more information
go to www.P65Warnings.ca.gov.
Part Number
- A. (1)-Mounting plate
- B. (2)-Outlet Box Screws
- C. (3)-Wire Connector
- D. (2)-Screw
- E. (1)-Backplate(W5.5″xH7/8″) XEH921CHBKP5.5IN
- F. (1)-Metal Sleeve(Ø7/8″xH3.3″) XEH921CHCDL3.3IN
- G. (1)-Fabric Shade(W5″xH6.25″) XEH921SHA6.25IN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>