TESmart HM-MT402 HDMI 2.0 4X4 Matrix Switcher Installation Guide

: June 13, 2024
: TESmart

Table of Contents

TESmart HM-MT402 HDMI 2.0 4X4 Matrix Switcher
Product Information
INTRODUCTION
FEATURES
CONNECTION DIAGRAM
OPERATION CONTROLS AND FUNCTIONS
REMOTE CONTROL
SPECIFICATIONS
PACKAGE CONTENTS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TESmart HM-MT402 HDMI 2.0 4X4 Matrix Switcher

Product Information

The HDMI 2.0 4X4 Matrix Switcher 4:4:4 is a high-performance audio and video matrix switcher that supports resolutions up to 4K@60Hz (YUV 4:4:4, 8-bit). It offers pass-through support for digital audio formats, including LPCM 7.1, bitstream, and HD bitstream. The switcher features 4 HDMI inputs and 4 HDMI outputs, allowing for fully matrixed switching. It also includes a WebGUI interface for remote control and configuration, with the ability to store and recall up to four routing presets.

INTRODUCTION

This 4×4 4K UHD Matrix provides a high level of audio and video performance with support for resolutions up to 4K@60Hz (YUV 4:4:4, 8-bit) and pass-through support of digital audio formats including LPCM 7.1 (with sampling rates up to 192kHz), bitstream, and HD bitstream. The 4 HDMI inputs and 4 HDMI outputs support fully matrixed switching. A sophisticated WebGUI interface supports storing and recalling up to four routing presets, making remote control and configuration of the unit a breeze.

FEATURES

HDMI inputs and outputs with 18Gbps (600MHz) 4K UHD support
DVI 1.0 compliant with the use of an HDMI-DVI adaptor
HDCP 1.4 and 2.2 compliant
Supports HD resolutions up to 3840×2160@60 Hz (YUV 4:4:4, 8-bit) & 4096×2160@60 Hz (YUV 4:4:4, 8-bit)
Supports 48-bit Deep Color up to 1080p60
Supports 3D signal bypass
Supports pass-through of LPCM 7.1, bitstream and HD bitstream audio formats over HDMI
Supports storing and recall of up to four routing presets
Controllable via front-panel buttons, RS-232, telnet, WebGUI, and IR remote

CONNECTION DIAGRAM

OPERATION CONTROLS AND FUNCTIONS

Remote control sensor
Input Select/Indicators (A):
Press the “HDMI OUT A” button repeatedly to switch to your desired source, and the LED will illuminate to indicate which input source is being selected, and routed to HDMI A display.
Input Select/Indicators (B):
Press the “HDMI OUT B” button repeatedly to switch to your desired source, and the LED will illuminate to indicate which input source is being selected, and routed to HDMI B display.
Input Select/Indicators (C):
Press the “HDMI OUT C” button repeatedly to switch to your desired source, and the LED will illuminate to indicate which input source is being selected, and routed to HDMI C display.
Input Select/Indicators (D):
Press the “HDMI OUT D” button repeatedly to switch to your desired source, and the LED will illuminate to indicate which input source is being selected, and routed to HDMI D display.
Power Switch & LED Indicator:
The LED will illuminate when the power is turned on.
Power:
Plug the 12V/2A DC power supply adapter into the unit and connect the adaptor to AC wall outlet.
HDMI inputs 1~4:
Connect to the HDMI output of your source equipment such as DVD player or set- top-box.
HDMI outputs A~D:
Connect each of these output ports to the HDMI input of an HDMI display.
RS232 Communication Port:
Connect to a PC or Laptop via RS232 terminal to a D-Sub 9-pin cable for the transmission of RS-232 commands.
Ethernet:
Connect to an internet or network activate device.