TigerTough W0555037 60/40 Seat Cover Installation Guide
- August 29, 2024
- TigerTough
Table of Contents
TigerTough W0555037 60/40 Seat Cover
Specifications
- Part Number : W0555037
- Product Type : 60/40 Seat Cover
- Pieces: (3) Seat Back, (2) Seat Bottom, (3) Headrest
Product Usage Instructions
Installation Steps
- Press tabs and pull up.
- Pull cover behind the belts.
- Put cover into position and align holes with headrest.
- Stretch holes over plastic.
- Attach Velcro at the top, pull down, and fasten the seam.
- Push flaps through and double flap over.
- Pull the flap tight and fasten it.
- Put the cover on the seat bottom and push the top flaps through.
- Tie string behind the seat by tying a loop in the string, pulling it through, and tying it back tight.
- Fasten the front and back flaps to finish the seat cover installation.
- Pull the cover over the headrest and fasten the headrest flaps.
Hey there!
- It’s not rocket science, but following the instructions will make installing your seat covers a lot easier. We promise.
- If you have any questions, comments, or issues, we’re here to help! You can reach us at 507.246.3545 (call or text) or email orders@tigertough.com.
PART NUMBER PRODUCT TYPE PIECES
W0555037
- 60/40 SEAT COVER
- (3) SEATBACK
- (2) SEAT BOTTOM
- (3) HEADREST
WARRANTY
2-YEAR IT’S COVERED UNCONDITIONAL WARRANTY
Basically, you break it, we buy it. Seriously.
Your new seat covers are covered by a two-year, unconditional, no B.S.
warranty.
That means that if you manage to abuse them to a point that they can’t perform
like they’re supposed to within two years of when you bought them, we’ll make
it right. Depending on what is more practical, we’ll either repair or replace
the damaged cover.
General care instructions
- In most cases dirt, debris, spills and pet hair can be removed by wiping with a damp cloth.
- Seat covers can be removed and machine washed on low temperature setting using mild detergent. Drip dry or machine tumble dry on a no heat cycle. Straps should be coiled and secured with rubber bands for machine washing and drying.
- Soil may be removed with spray cleaner or detergent and water.
- Oil or grease stains should first be treated with a dry cleaning solvent followed by a spray cleaner or detergent and water.
- Do not use bleach.
FAQs
- Q: What is the warranty on the seat covers?
- A: The seat covers are covered by a two-year, unconditional warranty. If they fail to perform as intended due to abuse within two years of purchase, we will repair or replace them.
- Q: How can I contact customer support?
- A: You can reach us at 507.246.3545 (call or text) or email orders@tigertough.com for any questions, comments, or issues.
Read User Manual Online (PDF format)
Loading......