CRYSTORAMA COL-102-CH Colton 2-Light Polished Chrome Wall Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
CRYSTORAMA COL-102-CH Colton 2-Light Polished Chrome Wall Mount
Product Information
The product is a fixture with model number COL-102-CH. It can be mounted either upwards or downwards and is damp-rated. The fixture requires 2 medium base bulbs with a recommended wattage of 60 watts and a maximum wattage of 60 watts. LED bulbs are recommended for extended use. The product comes with a mounting plate, backplate, glass shades, socket rings, and sockets. The glass shades are 5 inches wide and 7.5 inches high. The product is designed to be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes. The product may expose users to Lead, which is known to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Turn off power to the outlet box before installing the product.
- Install the mounting plate onto the outlet box using two outlet box screws.
- Attach the backplate over the mounting plate and secure with screws.
- Place the glass shade over the socket and secure with the socket ring. Repeat for the other glass shade.
- Install 2 medium base bulbs with a recommended wattage of 60 watts and a maximum wattage of 60 watts. LED bulbs are recommended for extended use.
Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes.
ASSEMBLY INSTRUCTION
The fixture can be mounted either upwards or downwards.
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. You will need 2 -Medium Base Bulb 60 Watts recommended 60Watts Max. USE LED BULBS FOR EXTENDED USE. The fixture is Damp rated.
How to Install
- Install the mounting plate onto the outlet box using two outlet box screws.
- Attach the backplate over the mounting plate and secure with the screws.
- Place the glass shade over the socket and secure with socket ring. Repeat for other glass shade.
DETAILED ILLUSTRATION
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65warnings.ca.gov.
Part Number: #COL-102-CH
- A. (2)- Wire Connector
- B. (1)- Mounting plate
- C. (2)- Screw
- D. (1)- Backplate (Ø5.5″)
- XSN101CHBKP5.5IN
- E. (2)- Socket Ring
- F. (2)- Glass Shade; W5″, H7.5″
- XSN101SHA
- G. (2)- Socket
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>