CRYSTORAMA 6822-MK-CL-MWP Othello Wall Sconce Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
6822-MK-CL-MWP Othello Wall Sconce
Instruction Manual
6822-MK-CL-MWP Othello Wall Sconce
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes. You will need 2-Candelabra Base Bulb 40Watts Recommended 60
Watts Max.
USE LED BULBS FOR EXTENDED USE The fixture is damp rated
How to Install
- Do a complete inventory of all parts and components before you start installing
- After safely attaching the fixture into the outlet box, install bobeches,bulbs and proceed to connecting the power.
- hen you begin to dress the fixture, start with packet labeled (A)
- IMPORTANT: Apply crystal sets in alphabetical order
Crystal Sets
A. (14mm-3holes+50mm)x4sets
B. (Square+14mm+63mm)x1set
C. (14mm+63mm)x1set
D. (14mmx9pcs)x2sets
E. (14mmx4pcs+14mm-3holes+14mmx4pcs)x1set
WARNING: This product can expose you to lead which is known to the State
of California to cause cancer and/or birth defects or reproductive harm For
more information go to
www.P65W.arnings.ca.gov
Part Number
Part Numbers
A. (1)-Ground Screw
B. (1)-Nipple
C. (1)-Mounting Plate
D. (2)-Outlet Box Screws
E. (3)-Wire Connector
F. (2)-Bobeche (D3.9″x Hole:1″) XEH6623MKBOB4IN
G. (2)-Metal Sleeve (H2.75″) XEH6623MKMCDL2.75IN
H. (2)-Plastic Sleeve (H2.75″) XEH6623MKPCDL2.75IN
I. (1)-Ball Nut XEH6623MKBANUT
J. (1)-Frame
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>