geemarc VISO 8 Clock for Dementia User Manual
- June 15, 2024
- geemarc
Table of Contents
VISO 8 User Manual
Viso 8 – MSF
(United Kingdom only)
!!! Please refer to our website:
www.geemarc.com for an up to date user guide,as
there may be important updates and changes you need to be aware of !!!
Features
‐ Easy to Read and Understand Time display
‐ Perpetual Calendar Up to Year 2099
‐ Day of week & Month in 8 languages user selectable
‐ 12H / 24Hours
Unit Appearance
Part A‐LCD
A1: Day of the Week
A2: AM/PM
A3: Time
A4: Date
A5: Month
A6: Year
A7: Radio Control Icon
Part B‐Button
B1: “ ” Button
B2: “ ” Button
B3: “ ” Button
B4:“ ”Butto
Part C‐Structure
C1: Hanging Hole
C2: Battery Door
C3: Stand
Getting started:
Open the battery Cover (C2).
Insert 2 x AA size alkaline batteries observing polarity [“+” and
“–“marks]. There is “click” sound when insert batteries to remind
user the batteries was inserted correctly.
Replace the battery compartment cover. Place the unit onto flat
surface; the unit is ready for use now.
Time Setting
4.1 Radio Controlled Time:
After the start‐up of the unit, the clock automatically starts to
scan the MSF time signal. Radio Control Icon “ ” (A7) flashes on
LCD.
| (A7) flashes | Indicating now is receiving MSF signal |
|---|---|
| (A7) turns on | Indicating signal received successfully |
| (A7) disappears | Indicating signal reception failed |
- The clock automatically synchronizes with the MSF radio signal every day at 2.00 am to maintain accurate time keeping. If synchronization with the MSF radio signal fails, “ ” on LCD disappears and the clock then attempts to synchronize with the MSF radio signal at 3.00 am and 4 am.
- The clock can be set to scan the radio signal manually by holding “ ” button (B3) for 3 seconds. Each reception takes around several minutes. If receptions fail, scanning stops. (“ ” on LCD disappear) and repeats again on next full hour. E.g. scanning failed at 8:20a.m. It will scan again at 9:00a.m.
- Stop scanning MSF radio signal by holding “ ” button (B3) for 3 seconds.
4.2 Manual Time Setting:
- In time display, hold “ ” button(B4) for 3 seconds to enter Clock/Calendar setting Mode.
- Press “ ” (B1) or “ ” (B2) button to adjust the setting and press “ ” button (B4) to confirm each setting.
- (By keeping the “ ” (B1) or “ ” (B2) button pressed, could accelerate the process and reach the desired value more quickly)
- The setting sequence is shown as follow: Weekday & Month Language, 12/24 Hr, RCC (Radio Clock) ON/OFF, Time Zone, Hour, Minute, Year, Month, Day.
- There are 8 languages, English, German, French, Spanish, Italian, Dutch, Polish and Swedish, for day‐of‐week & Month.
Note:
(1) All Setting mode will automatically exit in around 15 seconds
without any adjustment. (2) For Time Zone: If you receive no RC‐MSF
frequency signal, the time zone should be set to 0. Time Zone is used
in countries which can received the MSF frequency signal but the time
zone is different from German Time ( i.e. GMT+1).
Lock buttons
- Hold “ ” (B1) and “ ” (B2) button at the same time for 5 seconds to lock the rest buttons.
- When rest buttons’ functions been locked, icon “ ” displayed. Hold “ ” (B1) and “ ” (B2) button 5 seconds again to unlock.
Precautions
- The clock loses its time information when the battery is removed.
- Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas.
- Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning agents may scratch plastic parts and corrode electronic circuits.
Radio controlled time reception range: up to 1200km from MSF transmitter.
Guarantee
From the moment your Geemarc Viso 8 is purchased, Geemarc guarantee it
for the period of two years. During this time, all repairs or
replacements (at our option) are free of charge. Should you experience a
problem then contact our helpline or visit our website at
www.geemarc.com. The guarantee does not
cover accidents, negligence or breakages to any parts. The product must
not be tampered with or taken apart by anyone who is not an authorised
Geemarc representative. The Geemarc guarantee in no way limits your legal
rights.
IMPORTANT : YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE
RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM.
UKCA Declaration :
The declaration of conformity may be consulted at
www.geemarc.com
CE Declaration : The declaration of conformity may be consulted at
www.geemarc.com
| RF power | < 250mW |
|---|---|
| Power requirements | AA batteries (2) |
Recycling directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products in end of life are recycled in the best way.
When this product is out of order, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
‐ Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in in a appropriate WEEE skip.
‐ Or hand the old product to the retailer. If you purchase a new one, they
should accept it.
For product support and help visit our website at
www.geemarc.com
E‐mail : help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760
Grande‐Synthe, France
This product is made in China To Geemarc Telecom UGViso8_MSF_En_A4_V1.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>