BEGA 24152 Recessed Wall Luminaire with Shielded Light Distribution Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

Application
Product description
Overvoltage protection
Safety
Please note:
Installation
Cleaning · Maintenance
Replacing the LED module
Accessories
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 24152 Recessed Wall Luminaire with Shielded Light Distribution Instruction Manual

BEGA 24152 Recessed Wall Luminaire with Shielded Light Distribution
Instruction Manual

Instructions for use

Application

Recessed wall luminaire with shielded light distribution for flush or surface mounted installation.
For glare-free illumination of surfaces from low mounting height.

Product description

Luminaire made of aluminium alloy,
aluminium and stainless steel
BEGA Tricoat® coating technology
Matt safety glass with optical structure
Reflector made of pure anodised aluminium
Recessed opening ø 175mm
Required installation depth 110mm
Fixing is achieved by using two adjustable
wedge-shaped claws
2 cable entries for through-wiring of mains
supply cable ø 7-10.5mm, max. 5G1.5@
Connection terminal 2.5@
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-276 V
DALI-controllable
Basic insulation is provided between the mains
and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect
temperature-sensitive components without
switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK06
Protection against mechanical
impacts < 1 joule
– Safety mark
– Conformity mark
Weight: 1.5 kg
This product contains light sources of energy
efficiency classes B, C

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp
Module connected wattage 7.7 W
Luminaire connected wattage 9.5 W
Rated temperature ta=25 °C
Ambient temperature ta max=50 °C
When installed in heat-insulating
material ta max=40 °C

24 152K3
Module designation LED-0269/830
Colour temperature 3000 K
Colour rendering index CRI >80
Module luminous flux 1515 lm
Luminaire luminous flux 549 lm
Luminaire luminous efficiency 57,8 lm/W

24 152K4
Module designation LED-0269/840
Colour temperature 4000 K
Colour rendering index CRI >80
Module luminous flux 1560 lm
Luminaire luminous flux 565 lm
Luminaire luminous efficiency 59,5 lm/W

Please note:

This luminaire is coated with BEGA Tricoatb.
BEGA Tricoatb is a registered trademark for a technology that we use to achieve optimal corrosion resistance.
Even the best possible surface protection and the highest corrosion resistance can be rendered almost ineffective in some cases by aggressive media caused by leaching of building materials.
Where such media are suspected, a material analysis must be carried out before installation.
Always avoid excessive use of chemical cleaning agents in the vicinity of the luminaire.

Installation

The recessed opening is covered by the frame of the luminaire housing.
Fixing of the luminaire in the structure is achieved by using two adjustable wedge-shaped claws.
Installation in solid, plastered walls:
The installation housing 10 486 is available for this purpose. If this is not used, an exact recessed opening of ø 175mm with a minimum
depth of 110mm is required.
Installation in exposed brickwork: The construction of an on-site recessed opening with the exact installation dimensions of ø 175mm with a minimum depth of 110mm is required. An installation housing cannot be used.
Installation in drywalling:
A recessed opening of ø 175mm with a minimum depth of 110mm is required.
The claws grip behind drywall.
Installation into insulated façades:
For installation in EWIS external wall insulation systems please use installation housing 13 545 in combination with a plaster frame 10 086 or 13 527.

Undo hexagon socket head screws.
Remove luminaire cover with glued-in glass and LED module

Disconnect plug connection.
Lead the mains supply cable through the cable entry into the luminaire housing. Make earth conductor connection and electrical connection. For digital control please use the connecting terminal DALI. In case this connector is not used the luminaire will be operated at full light output.

In order to guarantee the maximum service life of the electrical components, the enclosed desiccant bag must be placed in the luminaire. Please remove the desiccant bag from the foil packaging and place it in the position marked by the red information label immediately before permanently closing the luminaire.

Make earth conductor connection between luminaire cover and luminaire housing. Push plug into coupler as far as it will go.
Make sure that gasket is positioned correctly.
Put on luminaire cover and tighten the screws evenly and firmly.
Push luminaire housing into the recessed opening.
Tighten screws claw fastener.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the
LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.