BEGA 84572 Luminaire Recessed In The Ground Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 84572 Luminaire Recessed In The Ground
Product Information
Product Usage Instructions
Instructions for use
DIMENSION
Product Description
Lighting technology
Safety
Installation
Cleaning and Maintenance
Replacing the LED module
Accessories
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 84572 Luminaire Recessed In The Ground

Product Information

The product is a luminaire with overvoltage protection and is designed for recessed mounting in gravel, lawns, and flower beds. It has a trim ring that should be above ground level when installed. The luminaire housing must not be installed in heat-insulating material. The electrical connection should be done with matching protection class and safety class using suitable connection terminals. The product comes with an installation pipe to protect the power supply cable against mechanical damage. The luminaire housing also contains a desiccant bag to remove residual moisture.

Product Usage Instructions

Ensure the luminaire housing is not installed in heat-insulating material.
For recessed mounting, arrange the recessed depth so that the trim ring is above ground level.
If installed in compacted surfaces, make sure the housing is firmly fixed and the trim ring is not directly resting on the pavement or other surfaces.
If necessary, use the installation housing 70 693 for practical installation.
Carry out the electrical connection with matching protection class and safety class using suitable connection terminals.
Use a BEGA distribution box 70 730 or 71 053 for better protection.
To protect the power supply cable against mechanical damage, push the included installation pipe over the cable.
Tighten the screws in the trim ring evenly crosswise with a torque of 3.5 Nm.
Do not remove the desiccant bag from the luminaire housing as it is needed to remove residual moisture.

Instructions for use

Application

In-ground floodlight with symmetrical light distribution for soft lighting effects without any harsh light cones on the illuminated surface. Suitable for installation in gravel, lawns, flower beds or paved areas. The luminaires can be driven over by vehicles with pneumatic tyres.

Please note:

Luminaire must not be used for installation in road lanes, where the fixture is exposed to a horizontal strain due to braking, acceleration and change of direction.
For walk-through public areas, we recommend skid-blocking glass – see accessories.

DIMENSION

$BEGA-84572-Luminaire-Recessed-In-The-Ground-fig- $1$$

Product Description

Luminaire made of stainless steel
Steel grade no. 1.4301
Clear safety glass
Silicone gasket
Reflector surface made of pure aluminium with integrated diffuser 1,8 m water-resistant connecting cable 07RN8-F 3 G 1,5@ with implemented water stopper and 1.2 m PVC cable conduit
BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 68 10 m
Dust-tight and water pressure tight Maximum submersion depth 10 m
Not suitable for permanent operation under water
Pressure load 2,000 kg (~20 kN)
Impact strength IK10
Protection against mechanical impacts < 20 joule
Maximum surface temperature 25 °C (measured according to EN 60598 of ta 15 °C) r – Safety mark c – Conformity mark
Weight: 1.5 kg

This product contains light sources of energy efficiency classes B

Lighting technology

Half beam angle 56°

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
We recommend fuse protection via a residual current circuit breaker to be provided by the customer.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Luminaire housing must not be installed in heat-insulating material.
Luminaire for recessed mounting in gravel, lawns and flower beds.
The recessed depth must be arranged such that the trim ring is above ground level.
When installed in compacted surfaces make sure that the housing is firmly fixed and that the trim ring is not directly resting on the pavement or other surfaces (Fig. A). For this purpose installation of housing 70 693 can be practical (Fig. B).
The electrical connection must be carried out with matching protection class and safety class with suitable connection terminals (not included in the scope of delivery) at the luminaire power supply cable.
We recommend to use a BEGA distribution box 70 730 or 71 053.
To protect the luminaire power supply cable against mechanical damage, push the included installation pipe over the cable.
Tighten the screws in the trim ring evenly crosswise.
Torque = 3.5 Nm.

Please note:

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Lamp

Module connected wattage 4 W
Luminaire connected wattage 5.1 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 30 °C

84 572 K27

Module designation LED-1120/827
Colour temperature 2700 K
Colour rendering index CRI > 80
Module luminous flux 655 lm
Luminaire luminous flux 426 lm
Luminaire luminous efficiency 83,5 lm / W

84 572 R K27

Module designation LED-1120/827
Colour temperature 2700 K
Colour rendering index CRI > 80
Module luminous flux 655 lm
Luminaire luminous flux 366 lm
Luminaire luminous efficiency 71,8 lm / W

84 572 K3

Module designation LED-1120/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 675 lm
Luminaire luminous flux 439 lm
Luminaire luminous efficiency 86,1 lm / W

84 572 R K3

Module designation LED-1120/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 675 lm
Luminaire luminous flux 377 lm
Luminaire luminous efficiency 73,9 lm / W

84 572 K4

Module designation LED-1120/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 705 lm
Luminaire luminous flux 463 lm
Luminaire luminous efficiency 90,8 lm / W

84 572 R K4

Module designation LED-1120/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 705 lm
Luminaire luminous flux 397 lm
Luminaire luminous efficiency 77,8 lm / W

Cleaning and Maintenance

After installation, the luminaire should first be cleaned. Building dust, residues from contact adhesives, paint splashes and rust film must be completely removed. Never use high pressure cleaners and cleaning implements made of normal steel, steel brushes or steel wool because they cause extraneous rust to form.
When using stainless steel cleaners, please read the directions carefully.
Cleaning agents containing hydrochloric acid and chlorides should never be used.
We recommend cleaning the luminaires regularly

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the electrical installation.
LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during relamping.
Clean dirt and deposits from key openings of screw head. Do not use a high pressure cleaner. Open the luminaire and clean.
Use only solvent-free cleaners.
The luminaire housing must be completely clean and absolutely dry.
Please follow the installation instructions for the LED module.
Check all screws and threads thoroughly and grease them.
Check the gasket and replace, if necessary. A broken glass must be replaced.
Insert glass with gasket – with stepped side turned upward and the groove structure of the gasket turned downward – into the luminaire housing. Make sure that the glass is correctly positioned in the gasket bed.
Place trim ring onto glass step and tighten screws crosswise.
Torque = 3.5 Nm.

Accessories

14000214R Skid-blocking glass BEGA skid-blocking glass with the highest rating R 13 according to DIN 51130 can be used without restriction for all public areas. Abrasion resistance according to EN ISO 10545-7 Class 3
70 693 Installation housing

Distribution box for installation in soil