Bailey G12 LED HID Compact LED Lamps Instructions
- June 12, 2024
- Bailey
Table of Contents
Bailey G12 LED HID Compact LED Lamps
Product Information
- Product Name: LED HID G12
- Manufacturer: Bailey Electric & Electronics bv
- Address: Everdenberg 21, 4902 TT Oosterhout, Netherlands
- Contact Number: +31 (0)162 52 2446
- Website: www.bailey.nl
Technical specifications
- Only suitable for AC 220V-240V 50/60Hz.
- IP20
- Operating temperature: -20 ~ 40°C
Warning/Caution
- Before installation please read the specifications to make sure that this product is suitable for the operating environment.
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- Make sure the supply voltage is the same as the rated lamp voltage.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Do not disconnect existing wires from lampholder.
- Not suitable for use with emergency units.
- Lamp should be used in fitting with good ventilation.
- When used in enclosed fixtures the lumen maintenance and lifetime will be affected.
- Wet applications require an IP rated fixture.
- Due to overheating, the LED light source may fail rapidly. Therefore, not suitable for use in tight luminaires or luminaires where the reflector is close to the light source.
- LED retrofit installation should be done by a qualified professional. (12) Not suitable for use in extreme conditions or locations involving harmful substances.
INSTALLATION
- Switch off the power.
- Remove the existing lamp.
- Rewire the connections according to the provided diagram.
- Insert the LED retrofit lamp into the socket.
- Turn the power back on.
WARNING: Connect directly to mains voltage (AC). Disconnect ballast, capacitor and ignitor before use!
CONTACT
Bailey Electric & Electronics bv
- ADDRESS: Everdenberg 21 4902 TT Oosterhout Netherlands
- TELL: +31 (0)162 52 2446
- WEB:www.bailey.nl
References
Read User Manual Online (PDF format)
Loading......