Bailey LED T8 HO Multi LED Lamps Instruction Manual

May 15, 2024
Bailey

Bailey LED T8 HO Multi LED Lamps

Bailey-LED-T8-HO-Multi-LED-Lamps-product

Specifications

  • Product Name: ECOPLUS LED T8 HO EM+AC
  • Operating Voltage: AC 220-240V
  • Compatibility: Not for use with Electronic Ballast (HF/ECG), disconnect ballast before use
  • Installation: Direct connection to mains voltage
  • Usage: Suitable for use in various environments with proper ventilation
  • Special Notes: Not suitable for emergency units or use with dimmers

Product Usage Instructions

  1. Before installation, ensure the product specifications match the operating environment.
  2. Connect the product directly to mains voltage (AC).
  3. Ensure the supply voltage matches the rated lamp voltage.
  4. Follow all safety instructions to prevent injury or property damage.
  5. Do not disconnect existing wires from lampholder.
  6. Ensure good ventilation when installing the lamp.
  7. Avoid using the lamp in enclosed fixtures to maintain lumen output and lifetime.
  8. For wet applications, use an IP rated fixture.
  9. LED retrofit installation should be carried out by a qualified professional.
  10. Avoid using dimmers with the product.
  11. Avoid extreme conditions or locations with harmful substances.

Frequently Asked Questions

Q: Can I use this product with an Electronic Ballast?
A: No, this product is not compatible with Electronic Ballasts. Disconnect the ballast before installation.

INSTALLATION MANUAL

ECOPLUS LED T8 HO EM+AC
AC 220V-240V 50/60Hz, IP20, Temp. -20~40°C

Before installation please read the specifications to make sure that this product is suitable for the operating environment.

  • Connect directly to mains voltage (AC). Not for use with Electronic Ballast (HF/ECG), disconnect ballast before use!
  • Disconnecting magnetic ballast is optional, not necessary.

Bailey-LED-T8-HO-Multi-LED-Lamps-01

Bailey-LED-T8-HO-Multi-LED-Lamps-02

Bailey-LED-T8-HO-Multi-3LED-Lamps-3

Warning – Caution

  1. Risk of electric shock. Disconnect power before installation, servicing and removal.
  2. Make sure the supply voltage is the same as the rated lamp voltage.
  3.  All safety instruction must be followed to avoid a risk of injury or property damage.
  4. Do not disconnect existing wires from lampholder.
  5. Not suitable for use with emergency units.
  6. Lamp should be used in fitting with good ventilation.
  7. When used in enclosed fixtures the lumen maintenance and lifetime will be affected.
  8. Wet applications require an IP rated fixture.
  9. LED retrofit installation should be done by a qualified professional.
  10. Not for use with dimmers.
  11. Not suitable for use in extreme conditions or locations involving harmful substances.
  12.  The tube should be used in fitting with good ventilation.

Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout Netherlands

+31 (0)162 52 2446 | www.bailey.nl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals