Bailey ST45 Rope Light String Pendant Installation Guide
- June 9, 2024
- Bailey
Table of Contents
Bailey ST45 Rope Light String Pendant
INSTALLATION INSTRUCTIONS
Before installation please read the specifications to make sure that this product is suitable for the operating environment.
- Connect LED power supply adaptor to mains voltage (AC). Output voltage: 12V!
- Only use the supplied low voltage LED bulbs
Warning – Caution – Safety – Environment
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Not suitable for use in extreme conditions or locations involving harmful substances.
- Installation must be in accordance with latest IEE electrical regulations or national requirements.
- Do not attach other items to the product. Only use the product when it is working perfectly.
- Do not install near gas or electric heaters, fireplace, candles or other similar sources of heat.
- Keep away from flammable materials.
- The cable can’t be replaced, avoid damage to insulation during installation.
- Do not secure the cable of the product with staples or nails, or place on sharp hooks or nails.
- Don’t mount the light string with sockets facing upward.
- Not connectable.
- Keep the plug in a dry location.
- For indoor and outdoor use.
- Electrical products may not be disposed of in the same way as normal household waste. Take the fixture to a place where it can be recycled.
Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout The Netherlands +31 (0)162 52 2446 |
www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>