Bailey 145439 Solar Led Light String User Manual
- June 9, 2024
- Bailey
Table of Contents
Bailey 145439 Solar Led Light String
HANDLEIDING
145439
- Solar panel size: 126x126mm
- Solar panel power: 1.5W (DC 6V)
- Battery (lithium): 3.7V 2000mAh
- Working voltage / current: DC 3V / 240mA
- IP44
Warning – Caution – Safety – Environment
(1) Before installation please read the specifications to make sure that this
product is suitable for the operating environment. (2) Mak e sure the supply
voltage is the same as the rated lamp voltage. (3) All safety instruction must
be followed to avoid a risk of injur y or property damage. (4) Suitable for
outdoor use. (5) Do not attach other items to the product. Only use the
product when it is work ing perfectly. Store and install the product out of
the reach of children. (6) Keep away from flammable materials. (7) The cable
can’ t be replaced, avoid damage to insulation during installation. (8) Keep
the battery away from sources of the heat and fire, othe rwise it may explode.
(9) Do not insert other bulbs than those supplied with this product. (10). Do
not connect light string to other power supply. (11) Electrical products may
not be disposed of in the same way as normal household waste. Take the fixture
to a place where it can be recycled. (12) Turn off solar light when not in use
to preserve the rechargeable battery. (13) Please make sure that the solar
panel is always clean. Dust and dirt will reduce the efficiency. Only use a damp
cloth and a small amount of detergent.
SOLAR POWERED LIGHT
- During the day, the solar panel converts sunlight into electricity and recharges the battery. At night it uses the electricity stored during that day.
- The burning time of a solar lamp depends on the amount of (sun) light which is affected by geographical location, weather conditions and seasonal sunlight.
- Place the solar panel in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the batteries to charge fully and will reduce the hours of nighttime lighting. The selected location should not be near nighttime light sources as these may cause the solar light to turn off prematurely.
- Charging time: 4-6hrs (40.000lux)
- Buring time: 6-24hrs after fully charged (Brightness 25%/50%/100%)
INS TALLATION & MOUNTING
-
Install solar panel (2 options):
(A) Into lawn with post and spike;
(B) Attach with screws to wall or tree trunk. -
Connect light string to solar panel.
-
Long press ON/OFF the button for 3 seconds.
-
Select brightness (100%/50%/25%) (shortly press button again).
-
Light will be turned on automatically at night.
-
Turns off automatically for charging at daytime.
The indication appears for 10 seconds after a short press on the button.
This solar LED light string can also use USB for charging.
Bailey Electric & Electronics bv
Everdenberg 21 4902 TT Oosterhout Netherlands
+31 (0)162 52 2446 | www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>