Bailey 145684 TOPO Electronic Transformer for 12V Lamps 0-70W Instruction Manual
- June 9, 2024
- Bailey
Table of Contents
Bailey 145684 TOPO Electronic Transformer for 12V Lamps 0-70W
INSTALLATION MANUAL
Before installation please read the specifications to make sure that this product is suitable for the operating environment.
- This dimmable electronic transformer is compatible with 12V halogen and LED lamps!
- Dimmable with most leading/trailing edge dimmers.
- Transformer must be installed above insulation.
SPECIFICATION
- Primary voltage range: 220-240V
- Frequency: 50/60Hz
- Input current: 0.29A
- Secondary voltage: 11.5V
- Output current (full load): 6.0A
- Power range: 0-70W (Halogen) 0-45W (LED)
- Output frequency: 32~38KHz
- Efficiency: >93%
- Power factor: >0.99
- Input capacitance: 100nF
- Ambient temperature (ta): 50°C
- Max. case temperature (tc): 80°C
- Dimming: R,C & R,L,C
- Dimensions L x W x H: 113x44x28mm
- Weight: 110g
- Primary terminal: 2-pole, screw dia 5.2mm
- Input wire cross section: 0.75-2.5mm²
- Secondary terminal: 2-pole, screw dia 3.2mm
- Output wire cross section: 0.75-2.5mm²
- Secondary cable length (min-max): 30-200cm
- Housing material: PC
- Safety class: II
- Overload protection: √
- Short ciruit protection: √
Wiring scheme
Warning – Caution
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Wet applications require an IP rated fixture.
- Installation should be done by a qualified professional.
- Install transformer in places with good air flow and away from heat sources.
- Dimmer should be installed on power input wire leading to transformer.
- If flickering or noise occurs it means the transformer is not compatible with used LED lamp and/or LED dimmer.
Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout The Netherlands +31 (0)162 52 2446 |
www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>