Bailey lights LED PL 2G7 TC-SEL Installation Guide
- June 9, 2024
- Bailey lights
Table of Contents
INSTALLATION MANUAL
LED PL 2G7 TC-SEL
AC 220V-240V 50/60Hz, IP20, Temp. -20~25°C
LED PL 2G7 TC-SEL
Before installation please read the specifications to make sure that this
product is suitable for the operating environment.
Connect directly to mains voltage (AC). Not for use with Electronic Ballast
(HF/ECG), disconnect ballast before use!
Warning – Caution
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- Make sure the supply voltage is the same as the rated lamp voltage.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Do not disconnect existing wires from lampholder.
- Not suitable for use with emergency units.
- Lamp should be used in fitting with good ventilation.
- When used in enclosed fixtures the lumen maintenance and lifetime will be affected.
- Wet applications require an IP rated fixture.
- LED retrofit installation should be done by a qualified professional.
- Not for use with dimmers.
- Not suitable for use in extreme conditions or locations involving harmful substances.
- Due to overheating, the LED light source may fail rapidly.
Therefore, not suitable for use in tight luminaires or luminaires where the reflector is close to the light source.
Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout Netherlands
+31 (0)162 52 2446 | www.bailey.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>