Bailey T8 EM+AC LED Party Instruction Manual

June 9, 2024
Bailey

Bailey T8 EM+AC LED Party

Bailey -EM-AC-LED-Party-product-image

Instruction

Before installation please read the specifications to make sure that this product is suitable for the operating environment.

  • Connect directly to mains voltage (AC). Not for use with Electronic Ballast (HF/ECG), disconnect ballast before use!
  • Disconnecting magnetic ballast is optional, not necessary.

Bailey -EM-AC-LED-Party-1

Bailey -EM-AC-LED-Party-2

Bailey -EM-AC-LED-Party-3

WarningCaution

  1. Risk of electric shock. Disconnect power before installation, servicing and removal.
  2. Make sure the supply voltage is the same as the rated lamp voltage.
  3. All safety instruction must be followed to avoid a risk of injury or property damage.
  4. Do not disconnect existing wires from lampholder.
  5. Not suitable for use with emergency units.
  6. Lamp should be used in fitting with good ventilation.
  7. When used in enclosed fixtures the lumen maintenance and lifetime will be affected.
  8. Wet applications require an IP rated fixture.
  9. LED retrofit installation should be done by a qualified professional.
  10. Not for use with dimmers.
  11. Not suitable for use in extreme conditions or locations involving harmful substances.
  12. The tube should be used in fitting with good ventilation

Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout Netherlands
+31 (0)162 52 2446 | www.bailey.nl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals