MERKURY MI-CW051-199W Smart WiFi Camera User Guide
- June 9, 2024
- Merkury
Table of Contents
MERKURY MI-CW051-199W Smart WiFi Camera
What’s in the Box
GET STARTED
STEP 1
- Download the “Merkury Cam by Geeni” App from App Store or Google Play.
- Register an account on the App.
- Enter your email address.
- Enter the verification code and create a password.
- Log in to the App.
Resetting Device
Reset the Camera by pressing the reset button for 3-4 seconds.
STEP 1
Setup Camera
- If you would like to use the included installation mount kit, you can screw in the base of the camera using the included screws and anchors. Refer to the drawing.
Plug In
- Once installed, plug in the power cable. The light will begin flashing to indicate it is ready for the setup steps.
HD Camera
(Optional) SD Card Installation
- Insert microSD card as shown. Will enable video recording and playback from your phone.
STEP 2
Add device
- Be sure to reset camera by pressing the reset button for 3-4 seconds.
- In the app, tap the “Devices” tab on the bottom and tap “+“ in the top corner of the Devices screen.
- Choose “Wi-Fi Camera” and enter your Wi-Fi details.
- Scan the QR code with the camera. When you hear the camera beep, select ‘I heard the sound’ and it will add your camera.
Connect Wi-Fi & QR scan
- The indicator light will turn solid blue when the device has connected successfully!
Pairing device
The app will attempt to connect. This may take a few moments.
ADD TILES
- Upon successful pairing. a tile for the camera will automatically be added to the dashboard. You can add tiles with the “+” on the Home page or resize organize, and remove tiles by tapping “Edit”.
- Press the camera tile to view a live stream from the camera.
SETTINGS
-
Access Camera Settings:
- From your main device list, click the camera you want to edit, then click
-
Device Name:
- Device Name to rename your camera to something like “Family room or “Back hallway”. then click Save.
-
Motion Zones:
- Click Motion Zones and then click on each square to deactivate or activate that zone from detecting motion, then click Save.
-
Rotate image:
- If you mount your camera upside down, toggling this switch will rotate the image so that it’s right side up.
-
Remove Device:
- Delete the camera from your account. Until it’s deleted, it will always be linked to your account.
Rules
Create Motion & Sound Detection Rules
- Select the “Rules” tab on the bottom navigation bar and tap the “” at the top corner of the screen.
- You can use a recommended rule. like “Record video and get notifications when motion is detected”, or create your own.
Frequently Asked Questions
How can I share videos with family and friends?
Select the “Activity tab on the bottom navigation bar and view an activity to
share with others. Use the “Share” button to choose how you want to share the
activity event.
How do I customize my dashboard?
Select the “Edit” option on the top of “Home” page. Create additional pages on
your dashboard by dragging tiles to the right and organize devices to fit how
you use them.
How Many Devices Can I Control?
The app can control an unlimited amount of devices in an unlimited amount or
locations. Your router may have a limitor how many devices can be connected to
one router. My Merkury device has a funny name.
How do I rename it?
From your main device list, click on the device yOu want to rename, then click
“Device Settings, then click on “Device Name. Rename your device to a more
familiar name like Bedroom or “Living Room and then click Savve. The device
appears offline or unreachable, what should I do? Make sure your Wi-Fi router
is online and in range. Make sure you have the latest functionality by
clicking Check for firmware update” in your device settings.
What’s the Wireless Range?
Ihe range of your home Wi-HIs heavily dependent on your home router and the
conditions of the room. Check with your router specifications for exact range
data. If my Wi-Fi/ Internet goes down, will it still work? Merkury products
need to be connected to Wi-Fi in order to use them remotely.
Troubleshooting
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check
whether there are any Internet connection problems. If the Wi-Fi signal is too
weak, reset your Wi-Fi router and try again.
Reset the device
Reset the LED strip by pressing & holding reset button until the LEDs blink
slowly every 3 seconds. (If it’s blinking quickly or solid, reset it again)
System Requirements
- Mobile device running iOS® 14 or higher or
- Android™ 11 or higher
- Existing Wi-Fi Network
Technical Specifications
- Camera: up to 1080p (1920 x 1080) @15fps
- Field of View: 135°
- Audio: Insternal Speaker and Microphone
- Storage: supports up to 128 GB microSD card (not included)
- Power: Micro USB – 5V, 1A
- Operating Temperature: 14° – 140°F (-10° – 60°C)
- Wi-Fi: IEEE 802.11n, 2.4GHz (not compatible with 5GHz Wi-Fi networks)
VOICE CONTROL GUIDE
Thank you for purchasing your Merkury smart home product. Make sure your devices are already set up using the Geeni app, then follow these steps.
Name and Control Each Device by Voice
Things you can say: Stream to:
- Open the Google Home app and go to Home Control in the menu.
- Tap the “+“ button.
- Choose “Geeni“ from the list of Home Control partners.
- Authorize your account with Google Assistant using the username and password from your Geeni app.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
Support
If you encounter any issues, please contact us at support.mygeeni.com for help. To explore our full selection of products, visit us at: mygeeni.com 888-232-3143 Toll-free © 2022 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. Geeni is a registered trademark of Merkury Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon. com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners. Made in China