solis S4 Wifi Stick Datalogger Installation Guide

Stick Datalogger
Installation Guide

WiFi Stick Datalogger

Version: 4.2
Delivery Content

• 1 WiFi stick
• 1 Quick Installation Manual

Install the datalogger

1Install the datalogger Connect the datalogger to the corresponding USB port of the inverter. A Solis SOK inverter is used here as an exarnple. Please follow the instructions below:

Install the datalogger

1. Press both sides of the protective cover and open the inverter USB port protective cover.

2. Align the WiFi datalogger with the USB port groove of the inverter and install it directly.

3. If you need to collect data from multiple inverters, please follow the inverter user manual to establish a communication connection with the inverter using the RS485 communication cable in a ‘daisy chain” manner.

4. After the datalogger is installed on the inverter, if the inverter is powered on, you need to set the inverter slave address, the first inverter is “Or, the second inverter is –02″, And so on.

NOTE

1. The device must be installed away from the strong magnetic field produced by large electrical appliances such as microwave oven, refrigerator, telephone, metal walls, etc. Otherwise, the communication quality may be affected. It may also be affected by lighting storm.
2. The [RESET] button on the back is used for .Short press will send the data immediately. long press for 5 seconds will enter into config mode for connection router. long press for 10 seconds will reset the connection.

The three constantly ON LED lights indicate the datalogger is working normally.

LED Lights Status

normally
OFF| Datalogger is powered up abnormally

WiFi Configuration

Step 1: Use you phone to scan the OR code to download and register the Solis Cloud APP. Or directly download frorn APP Store or Google Play Store by searching “Solis Cloud.

Step 2: If it is a new datalogger, please configure it first, then click the .WiFi configre”.

Unlogged account, click on ‘More Tools^ and soled ‘WWI Connowatbn.

Step 3: Manually input datalogger SN or Scan the SN on the datalogger.

Step 4: Click > make sure the phone is connected to router WiFi and switch back to the page to fill in the WiFi password, then move to next step.

Step 5: Long press the “Reset” button for 5 seconds until the yellow and green LEDs are quickly flashing. Then click the “les flashing..

Step 6: Wait for around 10 seconds. After the onfiguration completed, click .01,and back to the rain page, then skip to 3. multiple re-do the configuration still fail, please erform web configuration.

Step7: The wireless device (mobile phone or laptop) connects to the datalogger hotspot (Solis_serial number). The Password is 123456789.

Step8: Open a web browser, enter 10.10.100.254, fill in the Username and Password, click Log In. Username: admin Password: 123456789

Step9: Select Quick Set, search the router WIFI, and enter the password. Click Save, and appears the setting success interface. If failed, please re-do the configuration process or contact the after-sale engineers.

Create the Solis Cloud Account
step 1: Click the “Register”.

Step2: Select Owner or Organization for ernail address registration.

Step3: Enter the email to get the verification code, than enter your account and password, last click the “Register”.

Organization Register

Create Plant

Step1, Enter the main page of Solis Cloud APP, click “+”at the top right corner and select “Add plant”.

Step 2: Input the information of the plant as required. Then click “Done.

Step3: Confirm the plant information Click Create Plant.

Step 4: Click “View plant” to enter the plant homepage , then add the datalogger.

Step 5: Scan the SN number of the datalogger or manually input it.

Note: Scan the datalogger SN, NOT the inverter SN.

Step 6: Plant creation succeeds.Click “Continu…atalogger” to check the monitoring data. If the plant has multiple dataloggers, please click “View Plant”.

FCC Certification

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device rnust accept any interference received, including interference that may cause undesired operation.
FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator your body.
Contact
Please contact us if you have any technical problems in terms of the product. Please provide the following information as well:

• Inverter SN
• Datalogger SN
• Problern Description

Ginlong Technologies Co., Ltd.
No. 57 Jintong Road, Binhai Industrial Park,
Xiangshan, Ningbo, Zhejiang, 315712, P.R.China.
Tel: +86 (0)574 6578 1806 F
ax: +86 (0)574 6578 1606
Email : info@ginlong.com
Web : www.ginlong.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>