dji BS30 Intelligent Battery Station User Guide

: June 5, 2024
: DJi

Table of Contents

BS30
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BS30

Intelligent Battery Station

User Guide

v1.0 2022.03

Disclaimer

Please read this entire document and all safe and lawful practices DJI™ provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree to use this product only for purposes that are proper. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI.

This document and all other collateral documents are subject to change at the sole discretion of DJI. This content is subject to change without prior notice. For up-to-date product information, visit https://www.dji.com and click on the product page for this product.

This document is available in various languages. In the event of divergence among different versions, the English version shall prevail.

Warnings

Keep liquids away from the inside of the BS30 Intelligent Battery Station (abbreviated as “battery station”).
DO NOT close the cover of the battery station during charging. Make sure it is well-ventilated and able to dissipate heat.
The battery station is only compatible with the TB30 Intelligent Flight Battery (abbreviated as “TB30 battery”) and WB37 Intelligent Battery (abbreviated as “WB37 battery”). DO NOT use the battery station with any other battery models.
Place the battery station on a flat and stable surface when in use. Make sure the device is properly insulated to prevent fire hazards.
DO NOT attempt to touch the metal terminals in the battery station. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup after powering off.
Take care to avoid injuring your fingers when opening or closing the battery station.

Introduction

The BS30 Intelligent Battery Station features eight TB30 battery ports, two WB37 battery ports, one USB-C maintenance port, and one USB-A and one USB-C charging port. It can charge two TB30 batteries and one WB37 battery simultaneously.

In the Box

Battery Station × 1 AC Power Adaptor Cable ×1

Paired Batteries Sticker Manuals × 1

BS30 Intelligent Battery Station User Guide

The illustrations in this manual may vary from the actual product.

Overview

dji BS30 Intelligent Battery Station Overview A

Cover
TB30 Battery Ports
Power Port
WB37 Battery Port
TB30 Battery Status LEDs
WB37 Battery Status LEDs
WB37 Battery Level LEDs
Battery Station Status LED
Power Button/Indicator
USB-C Maintenance Port
USB-C Charging Port (Recommended for Remote Controller)
USB-A Charging Port
Charging Mode Switch
Padlock Holes
Lock Clip
Handle
Pressure Valve

Usage

Charging

dji BS30 Intelligent Battery Station Charging

1. Connect the battery station to a power outlet using the AC power adaptor cable.
2. Press the power button once to power on the battery station.
3. To charge the DJI RC Plus remote controller, connect the USB-C ports of the battery station and remote controller using a USB-C to USB-C cable.
4. For TB30 batteries, make sure the charging mode is set to the mode required. The charging time is shown in the diagram.

A Storage Mode: Each battery pair is charged to 50% in sequence and kept at 50% after charging.
B Ready-to-Fly Mode: Each battery pair is charged to 90% in sequence and kept at 90% after charging.
D Standard Mode: Each battery pair is charged to 100% in sequence.

The battery station should be powered on to maintain the battery level in Storage Mode and Ready-to-Fly Mode. Power off the battery station after charging, except for special situations such as fire emergencies. Maintaining high power level in Ready-to-Fly Mode will affect battery life.

dji BS30 Intelligent Battery Station A

5. Insert the batteries into the battery ports to start charging.
A. For WB37 batteries, the battery station will charge the battery with the most power first.
B. For TB30 batteries, their charging sequence is illustrated below.

a. Between paired and singular batteries, paired batteries will be charged first. (Figure a)
b. Where there are multiple battery pairs (each formed by a top and bottom battery in the sequence of A, B, C and D), the pair with the highest power will be charged first. (Figure b)
c. If none of the batteries are paired, the two batteries with the highest power will be charged first. (Figure c)

dji BS30 Intelligent Battery Station figure a

(Figure a) (Figure B)

dji BS30 Intelligent Battery Station figure c

(Figure c)

Will charge first.

When the power of the paired batteries are not the same, the battery station will charge the one with less power first.
Connect the maintenance port to the remote controller USB-A port to update the firmware or diagnose the errors for battery station and batteries.
- The battery station will automatically warm up a TB30 battery to 18° C (64.4° F) before charging if the temperature of the battery is lower than 10° C (50° F) when inserted.
- When the WB37 battery is charged at the same time, the TB30 battery charging time will be slightly prolonged.

Battery Station LEDs Description

LED Indicators	Descriptions

Power Button
Solid green| Powered on
Battery Status LEDs
Blinks green| Charging
Solid green| Charging completed
Blinking yellow| Cooling down or warming up before charging
Solid yellow| Waiting to charge
Blinking red| Battery port communication error. Reinsert the battery or try another battery port.
Solid red| Battery error
Battery Station Status LED
Blinking yellow| Updating battery station firmware
Solid red| Battery station error

Connect to the remote controller, run DJI Pilot 2, and tap HMS to diagnose the error.

Buzzer Sound Description
The buzzer beeps to indicate the following errors:

A. When the battery status LED is red and the buzzer is beeping, it means there is an error with the battery.
B. When the battery station status LED is red and the buzzer is beeping, it means there is an error with the battery station.

Specifications

Model	CSX320-550
Dimensions	353×267×148 mm
Net Weight	3.95 kg
Compatible Battery Type	TB30 Intelligent Flight Battery

WB37 Intelligent Battery
Input| 100-240 VAC, 50/60 Hz
Output| TB30 Battery Port: 26.1 V, 8.9 A (supported up to two outputs simultaneously)
WB37 Battery Port: 8.7 V, 6 A
Output Power| 525 W
USB-C Port| Max. output power of 65 W
USB-A Port| Max. output power of 10 W (5 V, 2 A)
Power Consumption
(when not charging battery)| < 8 W
Output Power (when warming up battery)| Approx. 30 W
Operating Temperature| -20° to 40° C (-4° to 104° F)
Ingress Protection Rating| IP55 (with the cover closed properly)
Charging Time*| Approx. 30 min (charging two TB30 batteries from 20% to 90%)
Approx. 50 min (charging two TB30 batteries from 0% to 100%)
Protection Features| Anti-Backflow Protection
Short Circuit Protection
Over Voltage Protection
Over Current Protection
Temperature Protection

Charging time is tested in a lab environment at room temperature. The value provided should be used for reference only.

FCC Compliance Statement: Supplier’s Declaration of Conformity
Product name: BS30 Intelligent Battery Station
Model Number: CSX320-550
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAN ICES-003 (B) / NMB-003(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (BS30 Intelligent Battery Station) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/35/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (BS30 Intelligent Battery Station) is in compliance with the essential requirements and other relevant provisions of Electrical Equipment (Safety) Regulations 2016. A copy of the GB Declaration of Conformity is available online at www.dji.com/euro-compliance

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.