Bailey 145790 LED Corn Lamp Instruction Manual
- June 12, 2024
- Bailey
Table of Contents
Bailey 145790 LED Corn Lamp
Before installation please read the specifications to make sure that this
product is suitable for the operating environment.
Connect directly to mains voltage (AC)! Disconnect ballast, capacitor and
ignitor before use!
Warning – Caution
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- Make sure the supply voltage is the same as the rated lamp voltage.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Do not disconnect existing wires from lamp holder.
- Not suitable for use with emergency units.
- Lamp should be used in fitting with good ventilation.
- When used in enclosed fixtures the lumen maintenance and lifetime will be affected.
- Wet applications require an IP rated fixture.
- LED retrofit installation should be done by a qualified professional.
- Not for use with dimmers.
- Not suitable for use in extreme conditions or locations involving harmful substances.
- Due to overheating, the LED light source may fail rapidly. Therefore, not suitable for use in tight luminaires or luminaires where the reflector is close to the light source.
- Only use in combination with LED compatible photocell sensors.
- Prior to installation, please check whether the luminaire and in particular the lamp-holder can bear the weight of the LED Corn lamp. Increased weight may reduce the mechanical stability of certain luminaires and lamp holders.
- 80W and up: use safety cable to securely fasten lamp to luminaire body.
Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout Netherlands
+31 (0)162 52 2446 | www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>