MINKA LAVERY 2338-66A Lavery 1-Light Coal Bell Mini Pendant Instruction Manual

MINKA LAVERY 2338-66A Lavery 1-Light Coal Bell Mini Pendant

Product Information

The product is a lighting fixture with item number 2338-66A. The package includes a mounting plate, two mounting screws, a ground screw, a glass shade with item number G2338, and fixture wires (black or smooth, white or ribbed, and green or bare copper for ground). The fixture is designed to be mounted on a junction box and can be assembled with a cord to hang at a desired height. The installation requires shutting off the power at the fuse box or circuit breaker.

Product Usage Instructions

1. Before installing the fixture, shut off the power at the fuse box or circuit breaker.
2. If replacing an old fixture, remove it along with the mounting hardware.
3. Check that all parts are included in the package as shown in the illustration.
4. Determine the desired hanging height and cut the cord if necessary.
5. Assemble the fixture with the cord as shown in Fig. 1.
6. Connect the fixture wires (black or smooth, white or ribbed, and green or bare copper for ground) to the house wires (black for hot, white for neutral, and green for ground) as shown in Fig. 3.
7. Mount the fixture onto the junction box using the provided mounting plate and screws.
8. Turn the power back on at the fuse box or circuit breaker.
9. Test the fixture to ensure it is working properly.

INSTALLATION INSTRUCTIONS

MOUNTING THE FIXTURE (Fig.1)

1. Shut off the power at the fuse box or circuit breaker. If necessary, remove the old fixture, including the mounting hardware.

2. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
   ASSEMBLING THE FIXTURE WITH CORD (Fig. 1)
   

   • Set# A020-102
     

   • Mounting Plate
     

   • Ground Screw
     

   • *Mounting Screw2**

3. Determine the desired hanging height and if necessary, cut the cord leaving an additional 5’’ to allow for the electrical connections.

4. If needed, use a flathead screwdriver to loosen the screw (J) to adjust the length of the cable wire, then tighten the screw (J) until (K) is snug.

5. Attach the mounting plate (A) to the junction box (Not included) with screws (B). The side of the mounting plate (A) marked “GND” must face out.
   CONNECTING THE WIRES (Fig.2)

6. At this point, connect the electrical wires as shown in Fig.2, making sure that all wire connectors (I) are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided.

7. Tuck wire connectors neatly into a junction box.
   FINISHING THE INSTALLATION (Fig.1)

8. Place canopy (C) over the mounting plate (A) and secure with canopy screws (D).

9. Unscrew metal cover (G) from socket (E). Position glass shade (F) onto the socket and secure it with a metal cover (G).

10. Install (1) one medium base bulb (H) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification—DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

Your installation is now complete. Return power to the junction box and test the fixture.

Note: Illustration (Fig.1) in this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

DESCRIPTION

Hardware Bag

• A. Mounting Plate* 1
• B. Outlet Box Screws*2
• D. Canopy Screw-2
• 1. Wire Connector 3

Hardware Bag

• F. Glass Shade*1
• G. Metal Cover*1

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. AVERTISSEMENTI COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>