VEVOR DZ600-2S-V1 Vacuum Packing Machine User Manual

June 1, 2024
VEVOR

VEVOR-LOGO

VEVOR DZ600-2S-V1 Vacuum Packing Machine

VEVOR-DZ600-2S-V1-Vacuum-Packing-Machin-PRODCUT

Specifications

  • Model: DZ600-2S-V1
  • Type: Vacuum Packing Machine
  • Materials: Plastic film or plastic aluminum film
  • Usage: Paste foods, fruits, sauce vegetables, chemicals, pharmaceuticals, electronic components, precision instruments, rare metals, etc.
  • Application: Industries such as tea, food, and medicine

We continue to be committed to providing you tools with at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean covering all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.

Model: DZ600-2S-V1

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate: www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

WARNING:

  1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
  2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

GENERAL SAFETY RULES

  • Please read the entire operating instructions before using the products for the first time; They contain important information about the correct operation.
  • The guarantee/warranty will be void if damage is incurred resulting from non-compliance with the operating instructions. Liability for any consequential damage is excluded!
  • We do not assume any liability for damage to property or personal injury caused by improper use or the failure to observe the safety instructions! In such cases, the guarantee/warranty will be void
  • The unauthorized conversion, modification, or discs, assembly of the products is inadmissible because of safety and approval reasons (CE).
  • The product is not a toy and must be kept out of the reach of children. Particular care must therefore be exercised if children are present.
  • The product must not get damp, it is only intended for use in dry, indoor locations(not bathrooms or similarly damp areas). There is a risk of a fatal electric shock.
  • Do not expose the product or its accessories to extremely high or low temperatures.
  • Do not leave packing materials unattended. They may become dangerous playing material for children.
  • Dropping, falling, pressure, or tensile forces could destroy or at least limit the function of the product.
  • Never position the device in the vicinity of combustible or easily inflammable materials.
  • Always make sure that the rotary table on which the object is placed is located in the center of the housing!
  • This machine uses plastic film or plastic aluminum film as materials to vacuum package paste foods, fruits, sauce vegetables, chemicals, pharmaceuticals, electronic components, precision instruments, rare metals, and other items.
  • Products packaged under vacuum are not easily oxidized or moldy. Especially suitable for industries such as tea, food, and medicine.
  • If you have reason to assume that safe operation is no longer
  • possible, disconnect the device immediately and secure it against inadvertent operation.

It can be assumed that safe operation is no longer possible if:

  • the device shows visible signs of damage,
  • the device no longer functions,
  • after a longer period of storage under unfavorable conditions,
  • following heavy stress during transportation.

SAVE THESE INSTRUCTIONS

MODEL AND PARAMETERS


Model

| ****

DZ-600-2S-V1

---|---


Seal Length

| ****

600mm


Chamber Dimensions

| ****

67055040mm


Vacuum Pump Type

| ****

Oil Pump


Pumping Speed of Vacuum Pump

| ****

19.8m³/h


Voltage

| ****

AC 120V 60Hz


Max. Power

| ****

4500W


Vacuum Pump Power

| ****

900W


Machine Material

| ****

201 Stainless Steel

STRUCTURE DIAGRAM

VEVOR-DZ600-2S-V1-Vacuum-Packing-Machin-FIG-2

1 Vacuum cover 12 Heating strip
2 handle 13 Tension spring
3 Swing arm 14 Circuit board
4 Vacuum gauge 15 Heating transformer
5 Control panel 16 Oil filler
6 Bag pressing rod 17 Vacuum pump
7 Silicone strip 18 Oil drain port
8 Air Switch 19 Exhaust solenoid valve
9 Sealing strip 20 Air release solenoid valve
10 Spring 21 circuit board

PARTS LIST

Parts                             Model DZ-600-2S-V1
Heating Wire ×2
Teflon Cloth ×2
Vacuum Pump Oil ×2
Vacuum Bag ×60
Chamber Sealing Strip ×1
Vacuum Pump Oil Seal ×2
User Manual ×1

OPERATING INSTRUCTIONS

  1. Push the door latch towards the center by hand and remove the side door.
  2. Unscrew the oil mist filter of the vacuum pump and fill it with oil. The oil level should not be lower than half of the oil window. The oil level should not exceed 3/4 of the visible oil window. It is strictly prohibited to start the vacuum pump without oil. ( Note: two vacuum pumps)

PANEL OPERATION INSTRUCTIONS

  1. Time and status display. Display “_” as standby mode; Display “00” as the deflation status;
    The displayed numbers indicate the status of vacuum, sealing, permanent team, or cooling (with decimal points).

  2. Emergency stop button. Use when there is a problem with the machine or operation or when it needs to stop urgently.

  3. VACUUM time setting key: In the standby state, press the key for the first time, and the single digit number in the ① flashes; press the second time, and the ten-digit number flashes; press the third time to confirm the effective time and save to return to the standby state. ( Adjusting time range:0-99S)

  4. SEALING time setting key: In the standby state, press the key for the first time, and the single digit number in the ① flashes; press the second time, and the ten-digit number flashes; press the third time to confirm the effective time and save to return to the standby state. ( Adjusting time range:0-9.9S)

  5. SEALING TEMPERATURE setting key.

  6. a: For setting the ⑤SEALING TEMPERATURE, press this key to change the sealing temperature setting value.

  7. Press the ⑧LOW indicator light once, indicating that it is in a low-temperature state;

  8. Press twice to display ⑨MIDDLE, indicating that it is in a medium temperature;(Recommended)

  9. Press three times to show the ⑩HIGH indicator light, indicating that it is in a high-temperature state;

  10. Press four times ⑧⑨⑩ The indicator does not show, indicating any temperature state.

  11. b: For setting the cooling time, “after holding down the key for 5S”, and the single digit number in the ① flashes; press the second time, the ten-digit number flashes; press the third time to confirm the effective time and save to return to the standby state. ( Adjusting time range:0-9.9S) (Factory setting is 2S).

  12. INCREASE key. When setting vacuum, sealing, or cooling time, press this key to increase one to the flicker bit value.

  13. DECREASE key. When setting the vacuum, sealing, or cooling time, press this key to decrease the flicker value by one.

PANEL USAGE INSTRUCTIONS

  • Step 1: Connect the matching power supply

  • Step 2: Open AIR SWITCH

  • Step 3: Press the ③VACUUM button for vacuum time, according to the actual requirements, press ⑥INCREASED to increase the time/⑦DECREASE to reduce the time, generally about 25 seconds.

  • Step 4: Press the ④SEALING button for sealing time, according to the actual requirements, press ⑥INCREASED to increase the time/⑦ECREASE to reduce the time, generally normal bags for about 2 seconds. It is strictly prohibited to set the sealing time too long or burn out the sealing heating strip.

  • Step 5 : Press the ⑤SEALING TEMPERATURE button twice, point the indicator light to ⑨MIDDLE, and the general items are recommended to use the medium temperature state.
    Note: ③VACUUM and ⑤DECREASE clicked together refers to the PERMANNT TEM which has been set by the factory, no need to change.VEVOR-DZ600-2S-V1
-Vacuum-Packing-Machin-FIG-5

  • 5. Place the product to be packaged into a vacuum chamber. Pick up the bag pressing rod and place the vacuum bag flat on the sealing strip. Put down the bag pressing rod.

  • Press the front end of the vacuum cover by hand during operation. When operating, press the edge of the vacuum cover by hand, and the vacuum machine starts to work. After the vacuum machine starts to run, the hand leaves the machine, the ⑪VACUUM metre pointer will point 0.06-0.08 to achieve the vacuum purpose, and the machine will automatically complete the packaging process.

  • When the machine needs to change oil or is not used for a long time, loosen the screw under the oil window and drain the vacuum pump oil. Suggest replacing the vacuum pump oil after the machine has been working continuously 800 hours

CIRCUIT DIAGRAM

VEVOR-DZ600-2S-V1-Vacuum-Packing-Machin-FIG-9

MAINTENANCE

  1. After using , the surface of the machine should be cleaned and residual materials inside the machine should be removed.
  2. When storing, keep in a clean, dry, and safe location away from children.
  3. All maintenance, service, and repairs not discussed in the manual should only be performed by qualified service technicians.

Replace the high-temperature cloth(Teflon Cloth)

  1. Remove the screws on both sides of the tray, and then pick up the whole tray.|
  2. Remove the upper screws.
  3. Remove the old high-temperature cloth.
  4. Apply new high-temperature cloth.
  5. Reinstall the original screws
  6. Completing the Installation.

Replace the Chamber Sealing Strip

  1. Remove the Chamber Sealing Strip
  2. Inject new glass glue into the track to ensure air tightness
  3. Replace the Chamber Sealing Strip with a new oneVEVOR-DZ600-2S-V1-Vacuum-Packing-Machin-FIG-18
  4. Completing the Installation

TROUBLESHOOTING AND SOLUTIONS

Problem Possible Cause Solution
The machine doesn’t work and the control panel shows nothing. 1. No

connection of the power supply.

2. The contact of the power switch looses.

| 1.Check whether the plug and socket are effectively connected. 2.Check whether the wiring of the power input part inside the machine

is loose or detached.

The control panel startup,but the machine

doesn’t work.

| The parameter is being set.| Complete the parameter setting.
The best vacuum state can’t be achieved.The vacuumizing speed is slow.| 1. Short vacuumizing time.

2. The oil in the vacuum pump is not enough or the oil is not clean.

3. Air leakage and wear of the sealing ring.

| 1. Extend the vacuum time.

2. Check the oil level, refuel or change the oil (pay attention to the oil type (vacuum oil 46#,68#) and oil quantity.

3. Replace the sealing

ring.

Sealing failure or| 1.The bags are not| 1.Place the bags on the
poor sealing.| correctly placed on the| plate in order.
 | heating plates.| 2.Shorten/prolong the
 | 2.Too long/short sealing| sealing time.
 | time.| 3.Choose proper
 | 3.Inappropriate heating| temperature.
 | temperature..| 4.Clean or replace the
 | 4.Silicon strip damaged| silicon
 | or with impurity.| rubber.
 | 5.Damage of electric| 5.Change electric
 | heating wire.| heating wire.

CORRECT DISPOSAL

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices

MORE INFORMATION

  • Manufacture r: Shanghaimuxinmuyeyouxiangongsi

  • Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

  • EC REP: SHUNSHUN GmbH.
    Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany

  • Tel: +49 1727041930

  • [email protected]

  • UK REP: Pooledas Group Ltd.
    Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom

  • Tel: 01772418127

  • [email protected]

  • Imported to AUS: SIHAO PTY LTD.
    1 ROKEVA STREETEASTWOOD NSW 2122 Australia

  • Imported to the USA: Sanven Technology Ltd.
    Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

  • Made In China

Technical Support and E-Warranty Certificate www.vevor.com/support

Frequently Asked Questions

  • Q: Can this machine be used to vacuum package liquids?
    • A: No, this machine is designed for solid or paste-like items. It is not suitable for vacuum packaging liquids.
  • Q: How often should I replace the plastic film used for packaging?
    • A: The frequency of replacing the plastic film depends on usage. Replace it when it shows signs of wear or no longer seals properly.
  • Q: Can I use this machine outdoors?
    • `A: No, this machine is intended for indoor use only in dry locations. Do not expose it to damp conditions or extreme temperatures.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VEVOR User Manuals

Related Manuals