QAZQA 5482 Garly SL 4-Set IP68 LED WW Instruction Manual
- June 3, 2024
- QAZQA
Table of Contents
QAZQA 5482 Garly SL 4-Set IP68 LED WW Instruction Manual
INSTALLATION
DIMENISON
This item contains changeable LED module
| 1080 | LM |
|---|---|
| 4×3 | W |
| 3000 | K |
| >80 | CRI |
| 20000 | H |
| 15000 | ON/OFF |
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- When replacing a halogen lamp, wait for it to cool, for a minimum of 5 minutes.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Take note of the symbols when connecting wires: N = Neutral L = Live ® =Earth
- Meaning of symbols:
For indoor use only, where direct contact with water is impossible
This icon indicates the level of
water-proof and dust-proof
Protection Class I: the fitting must be earthed
Protection Class II: the fitting
is doubled insulated and does not require earthing
Protection Class Ill: the
fitting is low voltage
Minimum distance from lighted objects (meters)
Only the self-shielded halogen lamp should be used with the luminaire
Strip the wire to the
indicated length (mm);different items require different length
Connect using the specified
cable; different items require different cables
The type of lamp and maximum
size and wattage indicated in each lighting unit must not be exceed; different
items require different kind of light sources with different bulb icons
The armature is designed to
work only with the indicated voltage. Different items require different
working voltage.
The luminaire can be used in
combination with a dimmer
The reference light angle and
light space of the luminaire
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands www.qazqa.n1