CRYSTORAMA KEN-8305-PN Kendal Four Light Ceiling Mount Instruction Manual

CRYSTORAMA KEN-8305-PN Kendal Four Light Ceiling Mount

Product Information

Crystorama Lighting Fixture Model #KEN-8305-PN
The Crystorama Lighting Fixture Model #KEN-8305-PN is a damp-rated lighting fixture that comes with mounting hardware, ball nut, ceiling pan, socket, screw, top metal ring, glass panel, glass diffuser, hook, and metal frame. It requires four medium base bulbs with a recommended wattage of 40 watts and a maximum of 60 watts. LED bulbs are recommended for extended use. The fixture is 15 inches in height, 5-1/4 inches wide, and 20-5/8 inches long. The glass diffuser is 22-1/2 inches in width. This product can expose you to Lead which is known to the stateof California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Product Usage Instructions

1. All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Turn off power before installation.
2. Slide the glass diffuser onto the bottom of the metal frame and secure it with clips.
3. Slide the glass panels inside the metal frame and secure it with clips.
4. Remove screw#2 from each of the hooks. Place one hook onto the bottom of the bracket on the metal frame by inserting screw#1 into the 1st hole on the bracket. While holding the hook in place, place the top metal ring over the top of the bracket by aligning the hole on it with the 2nd hole on the bracket and hook. Secure it with screw#2. Repeat this for other hooks.
5. Install the mounting screws into the matching holes in the mounting plate. Secure the mounting plate to the outlet box with the outlet box screws.
6. Raise ceiling pan allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the ball nut.
7. Install the bulb(not included) into the socket.
8. Place the metal frame over the ceiling pan by inserting the hooks into the holes of the metal tab on the ceiling pan.
9. To change the bulb, raise the metal frame up over the ceiling pan and turn it sideways to take it down. Install the new bulb and put the metal frame back.

Crystorama.com

ASSEMBLY INSTRUCTION

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 4-Medium Base Bulb 40 Watts Frosted bulb Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
This fixture is Damp rated

How to install

1. Slide the glass diffuser onto the bottom of metal frame and secure it with clips.
2. Slide the glass panels inside the metal frame and secure it with clips.
3. Remove screw#2 from each of the hooks. Place one hook onto the bottom of the bracket on the metal frame by inserting screw#l into the 1st hole on the bracket. While holding the hook in place, place the top metal ring over the top of the bracket by aligning the hole on it with the 2nd hole on the bracket and hook. Secure it with screw#2. Repeat this for other hooks
4. Install the mounting screws into the matching holes in the mounting plate. Secure the mounting plate to the outlet box with the outlet box screws.
5. Raise ceiling pan allowing the mounting screws to protrude through the holes in the ceiling pan, and secure with the ball nut.
6. Install the bulb(not included) into the socket.
7. Place the metal frame over the ceiling pan by inserting the hooks into the holes of the metal tab on the ceiling pan.

How to change the bulb

Raise the metal frame up over the ceiling pan and turn it sideway to take it down. Install the new bulb and put the metal frame back.

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Numbers

• A-Mounting hardware
• B. (2)-Ball nut #XRF8305PNBANUT
• C -Ceiling pan
• D. Socket
• E. Screw
• F. (1)-Top metal ring
• G. (4)-Glass panel L #XRF8304GLA15.251N
• H. (1)-Glass diffuser W20-5/8″ #XRF8304DIFF20.6251N –
• I. Hook
• J. Metal frame

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>