Bailey 145145 LED Strip Set Instruction Manual

Bailey 145145 LED Strip Set

Product Information: LED Strip Set

The LED Strip Set is a product manufactured by Bailey Electric& Electronics. The set comes with a manual in multiple languages including English, Dutch, French, and German. The product is designed for mounting and has a 30mm size. The maximum length of the strip set is 3 meters and cannot be extended. It operates on 24Vdc and requires a power supply range of 100-240Vac.

Product Usage Instructions

1. Mount the LED Strip Set using the appropriate equipment.
2. Connect the Strip Set to a power supply range of 100-240Vac.
3. Turn on the Strip Set using the ON button.
4. Ensure that the length of the Strip Set does not exceed 3 meters as it is not extendable.

For further instructions and warranty information, refer to the manual provided with the product.

Warning – Caution

1. Before installation please read the specifications to make sure that this product is suitable for the operating environment.
2. Risk of electric shock. Disconnect power before installation, servicing and removal.
3. Make sure the supply voltage is the same as the rated input voltage of power supply.
4. All safety instruction must be followed to avoid a risk of injury or property damage.
5. Not suitable for outdoor use.
6. Strip must be installed on aluminum or other material with similar thermal conduction to avoid overheating.

MOUNTING

INSTALLATION

EN Maximum length is 3m. Not extendable.

SETTINGS

2700K – 3200K – 4000K – 5000K – 5500K – 6500K
5.| 60 SECONDS DELAY OFF
6.| BRIGHT/SPEED+
7.| DYNAMIC MODES**

1. Warm white (±3000K) fade
2.  Neutral white (±4000K) fade
3. Daylight (±6500K) fade
4. Warm white (±3000K) jump
5.  Neutral white (±4000K) jump
6. **** Daylight (±6500K) jump

FADE
JUMP

8.| BRIGHT/SPEED-
9.| SUNRISE
10.| SUNSET
11.| NIGHT LIGHT

RF Remote

• CR2025 – CR2032 3V
•  Range : 8m
•  With memory function

Safety – Maintenance – Environment

1.  Do not cover the product. Do not attach other items to the product. Store and install the product out of the reach of children. Only use the product when it is working perfectly.
2. Do not touch the product in the event of a fault or breakdown. Immediately switch off the product and disconnect the power supply.
3. The following situations are meant by fault or breakdown: there is visible damage to the product, the product is not working perfectly (e.g. it is flickering), there is a burning smell, the results of overheating are visible.
4. Testing and small repairs must be carried out by a qualified electrician.
5. In order not to adversely affect the service life, it is advisable to clean the fixture on a regular basis. Only use a soft cloth, water and soap to do so. Avoid exposure to volatile chemical substances such as alcohol, petrol or pesticides.
6. When your product needs replacing after a long service life, do not dispose of it with your domestic waste. Instead, choose an environmentally-friendly method of disposal.
7. Electrical products may not be disposed of in the same way as normal household waste. Take the fixture to a place where it can be recycled. Consult the local authorities or the seller for advice about collection and processing

Warranty

1. The warranty period will begin on the day on which the product was purchased from Bailey and will end after 2 years. If a defect occurs within the warranty period as a consequence of material faults and/or manufacturing errors, Bailey will replace the product. The warranty does not cover consequential damage, nor will any call-out charges, transport costs or installation costs be reimbursed. The warranty does not apply if:
2. There is no information, or there are no documents, referring to the date of purchase (invoice or delivery note).
3. The defect was caused by improper use of the product or use not as intended, or by use in extreme conditions or in conditions involving harmful substances.
4. The defect was caused by unsuitable connected peripheral equipment or surges in the electricity network.
5. Damage to the product was caused by external factors.

Bailey Electric & Electronics bv
Everdenberg 21 4902 TT Oosterhout Netherlands
+31 (0)162 52 2446
www.bailey.nl

References

• Home | Bailey

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>